Free English 8BITDO PRO 2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD 8BITDO PRO 2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the button assignments and layout for the 8BITDO PRO 2?
The 8BITDO PRO 2 features a comprehensive set of controls as detailed in the following table:
| Button Label | Description/Function |
|---|---|
| L / R | Left and Right Top Shoulders |
| L2 / R2 | Left and Right Triggers |
| L3 / R3 | Left and Right Stick Click Buttons |
| Select / + Start | Navigation and Menu Buttons |
| D-pad | Directional Pad |
| A, B, X, Y | Primary Action Buttons |
| Star | Turbo Function Activation Button |
| Home / Home LED | Home Navigation and Status Indicator |
| Profile / Profile LED | Custom Profile Switcher and Indicator |
| P1 / P2 | Rear Programmable Buttons |
| Status LED | Player Number Indicator |
How do I connect the 8BITDO PRO 2 to a Nintendo Switch?
Step 1. Ensure the Switch system is version 3.0.0 or above. Go to System Setting > Controller and Sensors > and turn on Pro Controller Wired Communication.
Step 2. Connect the 8BITDO PRO 2 controller to your Switch dock via its USB cable.
Step 3. Wait until the controller is successfully recognized by your Switch to begin play.
Note: Status LEDs indicate the player number. 1 LED indicates player 1, 2 LEDs indicate player 2, and 4 is the maximum number of players the controller supports.
What features are unavailable when using the 8BITDO PRO 2 on a Nintendo Switch?
When connected to a Switch, the 8BITDO PRO 2 does not support NFC scanning, IR camera, HD rumble, motion controls, or the notification LED. Additionally, the controller cannot wake up the system.
How do I connect the 8BITDO PRO 2 to a Windows device using X-input?
Step 1. Ensure your system is running Windows 10 (1703) or above.
Step 2. Connect the 8BITDO PRO 2 controller to your Windows device via its USB cable.
Step 3. Wait until the controller is successfully recognized by your Windows device to play.
Note: Status LEDs indicate the player number. 1 LED indicates player 1, 2 LEDs indicate player 2, and 4 is the maximum number of players the controller supports.
How do I connect the 8BITDO PRO 2 to an Android device?
Step 1. Ensure your device is running Android 9.0 or above and that OTG support is required and enabled on your device.
Step 2. Hold the B button, then connect the 8BITDO PRO 2 controller to your Android device via its USB cable.
Step 3. Wait until the controller is successfully recognized by your Android device to play.
How do I operate the Turbo function on the 8BITDO PRO 2?
To activate Turbo: Hold the button you would like to set turbo functionality to and then press the star button. The home LED will blink continuously when the button with turbo functionality is pressed.
To deactivate Turbo: Hold the button with turbo functionality then press the star button. The home LED will stop blinking.
Note: D-pad, joysticks, home, select, and start buttons are not included in the turbo functionality support.
What customization options does the Ultimate Software provide for the 8BITDO PRO 2?
The Ultimate Software gives you elite control over the 8BITDO PRO 2, allowing for the following customizations:
– Customize button mapping.
– Adjust stick and trigger sensitivity.
– Control vibration power.
– Create macros with any button combination.
– Create macros and assign them to the P1 and P2 buttons.
How do I manage custom profiles on the 8BITDO PRO 2?
The 8BITDO PRO 2 allows you to switch between 3 custom profiles using the profile switch button. The profile indicator LED will show which profile is active. Please note that the profile indicator will not light up when you are using the default setting.
CLICK HERE TO DOWNLOAD 8BITDO PRO 2 (01) PDF DOCUMENT