Post questions, comments, reviews or page errors in the comment box below.

Click here to download 3NSTAR SC550 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** sc550 SCANNER 2D USER MANUAL SC550 3nSbar orc BRNO. ONE SOLUTION Barcode Scanner Quick Start Guide Contents:’ Barcode Scanner •Quick Start Guide USB/ RS232 Cable • Power Adapter (optional ) 1. Scanner Overview LED Indicator Decoder Mode button Red Lamp Scan Window Volume control button Hanging holes Buzzer Hanging holes Host Interface Light Indicator LED Indicator Green light blinking Blue light blinking Green light On Blue light On Buzzer Beep Indication One Beep Two Beeps Three Beeps Explanation Decoding Successfully Decoding Successfully ID&2D Decoding Mode ID Decoding Only Explanation Decoding success Configuration success Power on USB Interface 2. Connection Guide Installation-USB 1. Plug the RJ45 connector of the USB cable to the host interface on the omni directional barcode scanner. 2. Connect the other end of the USB cable to an available USB port on the Host device. 3. Connect the external power supply (5V DC adapter) to the USB cable. 4. Switch on the host device. If properly connected, the omni directional scanner will confirm with a buzzer sound and LED light. Auxiliary interface for handheld scanner (l ).USB cable (2) .RS232 cable t Installation-RS232 1. Plug the RJ45 connector of the RS-232 cable to the host interface on the omni directional barcode scanner. 2. Connect the other end of the RS-232 cable to the port on the serial port (DB9) on the Host device. 3. If the host does not have a power supply (on DB9), connect the external power supply (5V DC adapter) to the RS-232 cable. 4. Switch on the host device. If properly connected, the omni directional scanner will confirm with a buzzer sound and LED light. No. 1230233001 VI .1

****** Page 2 ****** 3. Scanning Method Scanning methods: 1. Make sure all cables are securely connected. 2. Move the bar code towards the scan window. 3. Display the bar code anywhere within the effective range of the scanner. 4. After decoding, the scanner will beep once and the LED will flash once. 7. Keyboard Layouts Configuration method: Scan the function bar code directly. *US French Italian German 4. Reading Mode Decoder Mode button LED Indicator Press the Decoder Mode button Reading Mode Blue light pattern The scanner can scan ID code only Green light pattern The scanner can scan ID &2D code Spanish Czech Turkish-Q Turkish-F 5. Adjust the Volume II II I III I I III I I I I I I I I II 6. Problems and Solutions Volume control button Q- Press the Volume control button to adjust the volume The volume has low, medium and high to choose from 8. Suffix Value Configuration method: Scan the function bar code directly. None *OxOD (CR) TAB Problem No power Bar code is decoded, but not transmitted to the host. Unable to decode bar code to switch x Possible Solutions Disconnect the power adapter and reconnect Check the parameters(Waves)ofthe scanner and application 1. Please refer to this manual to check code reading method. Review correct code reading method. 2. Verify bar code is set to be readable. 3. Check if bar code is damaged or not readable due to scanner damage or malfunction. 9. Delay Time for Same Code Configuration method: Scan the function bar code directly. 300ms *750ms 2000ms


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

3NSTAR SC550 (01) PDF MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.