ZIGEN ZIG-POEWP-RX70 (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Click here to download ZIGEN ZIG-POEWP-RX70 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** ZIGEN COMPLETE HD/IP CONNECTIVITY SOLUTIONS ZIG-POEWP-Rx70 HDMI Wall Plate Receiver HDBase-T Receiver Over Single CAT5e/6/7 70m, IEEE POE Powered, 4K, IR, RS232 ZIGEN HDMI OUT 0 coo o IR OUT IR IN ZIG-POEWP-Rx70 USER MANUAL

****** Page 2 ****** Important Safety Instructions 1. Do not use this product near water. 2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 3. Do not install or place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 5. Only use attachments/accessories specified by the manufacturer. 6. To reduce the risk of electric shock and/or damage to this product, never handle or touch this unit or power cord if your hands are wet or damp. Do not expose this product to rain or moisture. 7. Unplug this apparatus during lightning storms or when unused for long periods of time. 8. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 9. Batteries that may be included with this product and/or accessories should never be exposed to open flame or excessive heat. Always dispose of used batteries according to the instructions. 2

****** Page 3 ****** Warranty Information Powered Product Warranty Zigen warrants its powered products against any defects in materials and workmanship for a period of three years from the date of invoice. Touchscreen displays carry a one year parts and labor warranty. If a malfunction occurs during the warranty period, Zigen will repair or replace a product to its original operating condition. A return authorization number must be obtained from Zigen before products are returned for service. Non-Powered and Cable Products – Lifetime Limited Performance Warranty Zigen warrants that its non-powered products and cable products will be free from defects in material and workmanship for as long as you or your customer owns the product. All Zigen non-powered products and cables are designed and engineered to meet and exceed performance specifications. If, at anytime, the product fails due to manufacturer defect, Zigen will repair or replace the product to ensure that it meets original performance specifications. Reduced performance due to normal wear and tear, or damages caused by misuse or negligence will not be covered. Zigen will test and evaluate all non-powered and cable products claimed defective. Products must be shipped to Zigen, prepaid along with proof of purchase only after obtaining a Return Merchandise Authorization (RMA) number from Zigen. This statement of policy is in lieu of any other policy expressed or implied and no representative or person is authorized to assume any other liability or adopt any other policy for Zigen without our written consent. Return Policy If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less shipping and handling. Zigen will not be responsible for shipping and handling of product returns. Returns will only be accepted of products with proof of purchase, products in the original packaging with zero to minimal use and a Return Merchandise Authorization RMA number provided by Zigen. 3

****** Page 4 ****** • Contacting Zigen Technical Support Tel: (818) 654-5252 Fax: (818) 654-5355 8:00AM 5:00PM (PST) Email info@zigencorp.com Web zigencorp.com Mailing Address Zigen Corp. c/o Customer Service 16135 Wyandotte Street Lake Balboa CA 91406 USA 4

****** Page 5 ****** Features HDMI Wall Plate Receiver IEEE POE — remote or source — can connect to IEEE POE device for power or can connect directly to a 5VDC source via 2-pin phoenix style connector on the back. Supports digital video formats up to Ultra HD 4K/2K, 60Hz, 4:2:0 pixel format Supports HDMI 1.2, 1.3 and 1.4 with 48-bit deep color Supports HDR Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Atmos, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio and more. Supports ‘R, RS-232 commands Supports HDCP 1.4 & 2.2 5

****** Page 6 ****** Specifications Inputs HDBase-T Receiver Over Single CAT5e/6/7 Power — On back — 5VDC direct or IEEE POE from RX or switch Outputs HDMI, IR. RS-232 Distance between TX and RX Full HDBaseT – 230′ or 70M @ 4K/60 8-bit Copy Protection Compliance HDCP – Yes – 1.4 & 2.2 Video Bandwidth 10.2 Gbps Video Timings: 480i, 480p, 720p, 1080i, 1080p, 1920×1200, 2K and 4K. 4K/2K, 30Hz 24bpp. 4K/2K, 60Hz, 24bpp with 4:2:0 pixel format Audio Up to Dolby TrueHD and DTS Master Audio Wall Mountable Yes 2 gang Decora style 6

****** Page 7 ****** Packing List The ZIG-POEWP-Rx70 is a 70 meter wall plate (230 feet) HDBaseT receiver. It can be powered with a 5 VDC supply or from a POE TX device that it is connected to like a ZIG-PS- 82 or ZIG-POE-70Tx. It can be used stand-alone as an HDBaseT wall-plate receiver, but really shines when paired with the ZIG-PS-82, ZIG-PRO-88, ZIG-PRO-1616 Switcher/scaler. Ideally used with projectors where fire code mandates “Fire Proof’ installations and where wall mounted displays have to be installed flush on wall. A must for conference rooms and huddle spaces. The ZIG-POEWP-Rx70 is packaged with the following items. 1 x ZIG-POEWP-Rx70 1 x User Manual 1 x Phoenix type captive connector 1 x IR Receiver If any of these products are not present upon first opening of the package, please contact Zigen or your reseller. 0 2015 Zigen, Corp. All Rights Reserved. All trademarks are the property of their respective owners. Zigen, Corp. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. 7

****** Page 8 ****** Table of Introduction Contents Front Panel Back Panel Connection Example 10 11

****** Page 9 ****** Front Panel HDMI Output — Connect HDMI cable to display, up to 4K UHD. 2. 3. 4. Connect RS-232 connect to phoenix connector Connect IR Emitter Connect provided IR Receiver EIGEN HDMI OUT 9 coo o RX GTX IR OUT IR IN

****** Page 10 ****** Back Panel 1. 2. HDBaseT Receiver Connect RJ45 up to 70 meters (230 feet) CAT5e, 6, 6a. This is the connection to an HDBaseT Transmitter such as the ZIG-POE-70Tx or ZIG-PS-82. 5 VDC Power connection if NOT using POE power, you can connect a 5VDC supply via phoenix style connectors. Captive Screw Connector pin outs are also located on the unit. 2-pin connector for power Power — connect black wire to negative terminal (-) Power — connect white wire to positive terminal (+) WARNING +5V GND 10

****** Page 11 ****** Connection Example < n out ZIGEN ZIG-POE-70 HDMI Extender 1080p 4K 3D 48-V DC ZigenCorp.com 0000 RXGTX HOMI OUT OUT Example is showing our HDBaseT Transmitter ZIG-POE-70 connected to the ZIG-POEWP-Rx70 HDBaseT receiver wall Plate with IR and RS232 control. 1 2. 3. 4. Connect sources to ZIG-POE-70Tx – HDMI Connect ZIG-POEWP-Rx70 to Display via HDMI Connect your Source. Turn on the Source and TV 11


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.