Post questions, comments, reviews or page errors in the comment box below.

Click here to download ZIGEN ZIG-POC-70L (01) PDF MANUAL

PDF Content Summary:


****** Page 2 ****** Important Safety Instructions 1. Do not use this product near water. 2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 3. Do not install or place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 5. Only use attachments/accessories specified by the manufacturer. 6. To reduce the risk of electric shock and/or damage to this product, never handle or touch this unit or power cord if your hands are wet or damp. Do not expose this product to rain or moisture. 7. Unplug this apparatus during lightning storms or when unused for long periods of time. 8. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 9. Batteries that may be included with this product and/or accessories should never be exposed to open flame or excessive heat. Always dispose of used batteries according to the instructions. 2

****** Page 3 ****** Warranty Information Powered Product Warranty Zigen warrants its powered products against any defects in materials and workmanship for a period of three years from the date of invoice. Touchscreen displays carry a one year parts and labor warranty. If a malfunction occurs during the warranty period, Zigen will repair or replace a product to its original operating condition. A return authorization number must be obtained from Zigen before products are returned for service. Non-Powered and Cable Products – Lifetime Limited Performance Warranty Zigen warrants that its non-powered products and cable products will be free from defects in material and workmanship for as long as you or your customer owns the product. All Zigen non-powered products and cables are designed and engineered to meet and exceed performance specifications. If, at anytime, the product fails due to manufacturer defect, Zigen will repair or replace the product to ensure that it meets original performance specifications. Reduced performance due to normal wear and tear, or damages caused by misuse or negligence will not be covered. Zigen will test and evaluate all non-powered and cable products claimed defective. Products must be shipped to Zigen, prepaid along with proof of purchase only after obtaining a Return Merchandise Authorization (RMA) number from Zigen. This statement of policy is in lieu of any other policy expressed or implied and no representative or person is authorized to assume any other liability or adopt any other policy for Zigen without our written consent. Return Policy If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less shipping and handling. Zigen will not be responsible for shipping and handling of product returns. Returns will only be accepted of products with proof of purchase, products in the original packaging with zero to minimal use and a Return Merchandise Authorization RMA number provided by Zigen. 3

****** Page 4 ****** Contacting Zigen Technical Support Tel: (818) 654-5252 Fax: (818) 654-5355 8:00AM 5:00PM (PST) Email info@zigencorp.com Web zigencorp.com Mailing Address Zigen Corp. c/o Customer Service 16135 Wyandotte Street Lake Balboa CA 91406 USA 4

****** Page 5 ****** Features Autonomous EDID management HDBaseT technology Supports 10.2 Gbps Supports HDR-8 Supports HDMI 1.4 HDCP 2.2 compliant POC Technology Supports CEC pass-through Supports Bi-directional IR Supports Bi-directional RS-232 Extend 1080p signal up to 70 meters/ 230 ft. Max Resolution 4K/ 30Hz 4:4:4 signals up to 35 meters/ 115 ft. 5

****** Page 6 ****** Specifications Function HDMI Connector RJ-45 Connector RS232 Connector IR IN IR OUT LED DC Jack Max. Resolution Cable Distance Power Adapter (Min.) Power consumption Operating Temperature Storage Temperature Relative Humidity External Power Supply Enclosure Weight Dimensions (LxHxW) 12-v HDMI A-Type Female x 1 RJ-45 Jack x 1 DB9 Female x 1 3.51.V Stereo Jack x 1 3.5q.J Stereo Jack x 1 LED x 3 12-v 4K@30Hz / 4K/30Hz 35-m (Max.) 1080P/60Hz 70 m (Max.) DC 12-V with lock 20W (MAX) o +500C -10 +500C Input: IOOVAC-240VAC, 50/60Hz; 12-VDC 2A Aluminum 182g 166 x 20 x 84 mm 6 182g

****** Page 7 ****** Packing List The ZIG-POC-70L is packaged with the following items: 1 x Transmitter 1 x Receiver 1 x 12V DC Power Adaptor 1 x IR Receiver 1 x IR Emitter 1 x User Manual If any of these products are not present upon first opening of the package, please contact Zigen or your reseller. 0 2019 Zigen, Corp. All Rights Reserved. All trademarks are the property of their respective owners. Zigen, Corp. Reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. c UL us This product uses UL-Listed power supplies 7 C GS

****** Page 8 ****** Table of Contents Introduction Introduction Transmitter Front Panel Transmitter Back Panel … Receiver Front Panel Receiver Back Panel 10 11 12 13 Get Started Installation ….. ….. ….. ….. …………………………………………………………….. 14 System Diagram Connection IR Receiver Cable Directions . HDMI Connector Signal Pin Out RJ-45 Wiring Information & Coding One-to-One System Connection Example 15 16 17 18 19

****** Page 9 ****** Introduction The ZIG-POC-70L is an ultra-thin HDMI 1.4 Extender consist of transmitter and receiver set. It extends 1080p/4K HDMI signal including bi-directional IR and RS-232 over single CAT-5/6A cable up to 70m 135m using (POC). This extender does not support compression and supports maximum resolution of up to 9

****** Page 10 ****** Transmitter Front Panel 1 2 3 POWER blue LED light LINK – blue LED light HDCP – blue LED light coo 10

****** Page 11 ****** Transmitter Back Panel 1 12-V DC Support bi-directional POC. 2 HDBT Connect using a CAT-5/6A cable. 3 IR OUT Connect IR Emitter to send IR signal to source device. 4 Connect to 3rd party control processor IR out to control display device. 5 RS-232 Connect an RS-232 cable from this port to an RS-232 device. 6 HDMI IN Connect to HDMI source. e 11

****** Page 12 ****** Receiver Front Panel POWER blue LED light LINK – blue LED light HDCP – blue LED light 12

****** Page 13 ****** Receiver Back Panel 1 24V DC Support bi-directional POC. 2 HDBT Connect using a CAT-5/6A cable. 3 IR OUT Connect IR Emitter to send IR signal to TV / Display. 4 Uset provided IR receiver to control remote source devices. 5 RS-232 Connect an RS-232 cable from this port to an RS-232 device. 6 HDMI OUT Connect to HDTV Display. 13

****** Page 14 ****** Installation 1. 2. 3. 4. 5. 6. Be sure to turn OFF source and TV. Connect the HDMI extension cable between HD Source and HDMI In port of the Transmitter. Connect the HDMI extension cable between the HDTV and the HDMI Out port of the Receiver. Connect Cat-5/6A cable between the Transmitter Link port and the Receiver Link port of the Receiver. Connect the Power adapter to the Receiver or Transmitter and power up the extender Turn on the HD source and HDTV. 14

****** Page 15 ****** System Diag ram Transmitter o IRI CATx: HDMI: RS232 Power: 4K/60Hz – 40m 1080P/60Hz – 70m POC o Laptop Emitter 4K Blu-Ray IR Output from Control Processor 15 Receiver Receiver Emitter HDTV

****** Page 16 ****** IR Receiver Cable Directions Plug the IR receiver into the ZIG-POC-70L-Tx “IR IN” port and place the IR receiver so you can point to it easily with your IR remote controller. IR Emitter Directions: Plug any third party IR emitter into the ZIG-POC-70L-Tx “IR OUT” port and place the IR sensor directly on the IR window on the front panel of the device you intend to control. 16

****** Page 17 ****** HDMI Connector Signal Pin Out 19 17 15 13 11 7 6 5 4 3 1 18 14 12 10 d Pin 1 2 3 4 5 6 7 8 9 10 Signal TMDS Data 2+ TMDS Data 2 Shield TMDS data 2 – TMDS Data 1+ TMDS Data 1 Shield TMDS Data 1 – TMDS Data 0+ TMDS Data O Shield TMDS Data O – TMDS Clock + Pin 11 12 13 14 15 16 17 18 19 Signal TMDS Clock Shield TMDS Clock – CEC Reserved (N.C. device) SCL SDA on DDC/CEC Ground +5 power Hot Plug Detect (HPD) 17

****** Page 18 ****** RJ-45 Wiring Information & Coding 3 56 8 Looking into connector Conductor Identification Pair 1 Pair 2 Pair 3 Pair 4 RJ-45 Plug Pin Assignment 5 4 1 2 3 6 7 8 18 Color Code for Conductor White-Blue Blue White-Orange Orange White-Green Green White-Brown Brown

****** Page 19 ****** One-to-One System Connection Example HDBaseT Transmitter z.lGEN 1.4 EXTEM)ER RS-232 HDMI IN CAT5e / CAT6 / CAT6a Extend HDMI signals up to 4K@30Hz: 35 meters/ 115 ft. 1080p : 70 meters/ 230 ft. 19 HDBaseT Receiver RS-232 HDMI OUT







Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.