ZIGEN ZIG-POEPRO-70A (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Click here to download ZIGEN ZIG-POEPRO-70A (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** ZIGEN COMPLETE HD/IP CONNECTIVITY SOLUTIONS ZIG-POEPRO-70A HDBaseT HDMI Extender ZIGEN SO ZIG-POEPRO-70A 18.GBPS HDMI EXTENDER wwwZigenCorp.com RS.232 ZIGEN R OUT. ZIG-POEPRO.70A 18.GBPS HDMI EXTENtER ZigenCorpcom ZIG-POEPRO-70A USER MANUAL

****** Page 2 ****** Important Safety Instructions 1. Do not use this product near water. 2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 3. Do not install or place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 5. Only use attachments/accessories specified by the manufacturer. 6. To reduce the risk of electric shock and/or damage to this product, never handle or touch this unit or power cord if your hands are wet or damp. Do not expose this product to rain or moisture. 7. Unplug this apparatus during lightning storms or when unused for long periods of time. 8. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 9. Batteries that may be included with this product and/or accessories should never be exposed to open flame or excessive heat. Always dispose of used batteries according to the instructions. 2

****** Page 3 ****** Warranty Information Powered Product Warranty Zigen warrants its powered products against any defects in materials and workmanship for a period of three years from the date of invoice. Touchscreen displays carry a one year parts and labor warranty. If a malfunction occurs during the warranty period, Zigen will repair or replace a product to its original operating condition. A return authorization number must be obtained from Zigen before products are returned for service. Non-Powered and Cable Products – Lifetime Limited Performance Warranty Zigen warrants that its non-powered products and cable products will be free from defects in material and workmanship for as long as you or your customer owns the product. All Zigen non-powered products and cables are designed and engineered to meet and exceed performance specifications. If, at anytime, the product fails due to manufacturer defect, Zigen will repair or replace the product to ensure that it meets original performance specifications. Reduced performance due to normal wear and tear, or damages caused by misuse or negligence will not be covered. Zigen will test and evaluate all non-powered and cable products claimed defective. Products must be shipped to Zigen, prepaid along with proof of purchase only after obtaining a Return Merchandise Authorization (RMA) number from Zigen. This statement of policy is in lieu of any other policy expressed or implied and no representative or person is authorized to assume any other liability or adopt any other policy for Zigen without our written consent. Return Policy If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less shipping and handling. Zigen will not be responsible for shipping and handling of product returns. Returns will only be accepted of products with proof of purchase, products in the original packaging with zero to minimal use and a Return Merchandise Authorization RMA number provided by Zigen. 3

****** Page 4 ****** Contacting Zigen Technical Support Tel: (818) 654-5252 Fax: (818) 654-5355 8:00AM 5:00PM (PST) Email info@zigencorp.com Web zigencorp.com Mailing Address Zigen Corp. c/o Customer Service 6934 Canby Avenue Suite 107 Reseda CA 91335 USA 4

****** Page 5 ****** Features Supports 4K@60Hz Supports HDR-IO Supports Dolby Vision 4K@ 30Hz Supports HDMI 2.0 Supports HDCP 2.2 Supports ARC Supports 3D pass-through Supports CEC pass-through Supports RS-232(Bi-direction transfer) Supports all frequency band IR control Supports all digital audio modes Supports 4K/60Hz 4:4:4 at 40-meter / 130-feet 5

****** Page 6 ****** Specifications Function HDMI Connector RJ-45 Connector RS232 Connector IR IN IR OUT LED DC Jack Max. Resolution Cable Distance Power Adapter (Min.) consumption Operating Temperature Storage Temperature Relative Humidity External Power Supply Enclosure Weight Dimensions (LxHxW) TX 48-v RX HDMI A-Type Female x 1 RJ-45 Jack x 1 DB9 Female x 1 3.5q.J Stereo Jack x 1 3.5q.J Stereo Jack x 1 4-in 1 LED Stack None 4K@60Hz / 4K/60Hz 40 m (Max.) 1080P/60Hz 70 m (Max.) Input: DC 48-V with lock 25W (MAX) o +550C -10 – +500C 00/0 ‘ IOOVAC-240VAC, 50/60Hz; 48-VDC 0.5A Metal 405g 182 x 20 x 114 mm 6 41 Og

****** Page 7 ****** Packing List The ZIG-POEPRO-70A is packaged with the following items: 1 x Transmitter (ZIG-POEPRO-70A “TX”) lx Receiver (ZIG-POEPRO-70A “Rx”) lx Power adapter DC 48V with lock lx IR Receiver lx User Manual 8x foot pads If any of these products are not present upon first opening of the package, Please contact Zigen or your reseller. 0 2018 Zigen, Corp. All Rights Reserved. All trademarks are the property of their respective owners. Zigen, Corp. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. c UL us This product uses UL-Listed power supplies 7 C GS

****** Page 8 ****** Table of Contents Introduction Receiver Front & Back Panel Transmitter Front & Back Panel Get Started Installation Connection IR Receiver Cable Directions . HDMI Connector Signal Pin Out ….. ….. ….. … . RJ-45 Wiring Information & Coding 9 10 11 12 13 14 15 16 One-to-One System Connection Example 3rd Party Peripheral Connection Example System Diagram 17 8

****** Page 9 ****** Receiver Front & Back Panel 1 2 3 1 2 3 LED LIGHTS POWER/ HDCP / LINK / MODE IR – IR OUT (for IR emitter) AND IR IN (for IR receiver) PHOENIX CONNECTOR – For 3rd party peripherals HOCP LINK HDBT – Connect using a CAT-6a cable. HDMI OUT – Connect with HDMI source. RS-232 – Connect an RS-232 cable from this port to an RS-232 device. 9

****** Page 10 ****** Transmitter Front & Back Panel 1 2 3 LED LIGHTS – POWER / HDCP / LINK/ MODE IR – IR OUT (for IR emitter) AND IR IN (for IR receiver) PHOENIX CONNECTOR – For 3rd party peripherals 1 2 3 4 48V DC -L power adaptor. HDBT – Connect using a CAT-6a cable. HDMI IN – Connect with HDMI source. RS-232 — Connect an RS-232 cable from this port to an RS-232 device. 0 10

****** Page 11 ****** Installation 1. 2. 3. 4. Be sure to turn OFF source and TV. Connect the HDMI extension cable between HD Source and HDMI In port of the Transmitter. Connect the HDMI extension cable between the HDTV and the HDMI Out port of the Receiver. Connect Cat-6a cable between the Transmitter Link port and the Receiver Link port of the Receiver. 11

****** Page 12 ****** IR Receiver Cable Directions Plug the IR receiver into the ZIG-POEPRO-70-RX “IR IN” port and place the IR receiver so you can point to it easily with your IR remote controller. The IR receiver is designed to work on the “Rx” receive side of the extender. The IR input on the “TX” transmitter side is designed to receive commands directly from control processor and is not intended to be used in conjunction with IR receiver. If your setup requires you to install and send IR receiver target on the “TX” transmitter side of the extender; we recommend using third party IR targets such as Xantech / Niles and these may be directly powered from “TX” transmitter phoenix block. IR Emitter Directions: Plug any third party IR emitter into the ZIG-POEPRO-70-TX OUT” port and place the IR sensor directly on the IR window on the front panel of the device you intend to control. 12

****** Page 13 ****** HDMI Connector Signal Pin Out 19 17 15 13 11 1 1b •16 14 12 d 6 4 Pin 1 2 3 4 5 6 7 8 9 10 Signal TMDS Data 2+ TMDS Data 2 Shield TMDS data 2 – TMDS Data 1+ TMDS Data 1 Shield TMDS Data 1 TMDS Data 0+ TMDS Data O Shield TMDS Data O TMDS Clock + Pin 11 12 13 14 15 16 17 18 19 13 Signal TMDS clock Shield TMDS clock – CEC Utility/HEAC+ SCL SDA DDC/CEC Ground +5 power Hot Plug Detect / HEAC-

****** Page 14 ****** RJ-45 Wiring Information & Coding 56 8 Looking into connector Conductor Identification Pair 1 Pair 2 Pair 3 Pair 4 RJ-45 Plug Pin Color Code for Assignment 5 4 1 2 3 6 7 8 14 Conductor White-Blue Blue White-Orange Orange Wh ite-Green Green White-Brown Brown

****** Page 15 ****** One-to-One System Connection Example HDBaseT Transmitter ZIGEN ZIG-POEPRO-70A HOMI EXTENDER ZigenCorp.corn HDMI IN CAT-6a Recommended Extend HDMI signals up to 70 meters / 228 feet 1080p 40 meter/ 130 feet 4k 15 HDBaseT Receiver ZICJEN ZIG-POEPRO-70A 18-G8PS HDMI EXTENDER ZigenCorp.com HDMI OUT

****** Page 16 ****** 3rd Party Peripheral Connection Example 789-44 CON’&CT’NG 12’gu; RCVR DL Senes IR Receive White Stripe 7-Foot Ribbon Cable wuth Mini Plug 3•Termina ZIGEN wwwIigeoC0tpß 3-Conductor Wire to Controlled Equiprrtent ZIGEN in ouve out. ZIG-POEPRO-70A 18-OBPS EXTENDER wwwZigenCorp.com 16

****** Page 17 ****** System Diagram ouw.lt from Control Processer Emitter POE :3re P*fW CATx: HOM RS232- Power. HOTV 17


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.