ZIGEN ZIG-POC-70 MKII (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Click here to download ZIGEN ZIG-POC-70 MKII (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** CONOLETE HO/ i? CONNECTIVITY SOLUTION s ZIG-POC-70 HDBaseT HDMI Extender ZIGEN ZIG.POC.70 Mkll 18-GBPS HDMI EXTENDER 4K/60Hz 1 HDCP 2.21 HOR-IO OR GNO mug Configuration ec ZigenCorp.com Rx ZIGEN ZIG-POC-70 Mkll 18-GBPS HDMI EXTENDER 4K/60Hz 41414 / HDCP 2.21 HOR-IO 3-&nm IR Configuration ZigenCotp.com RS-232 6-232 > IRINA 24V DC 1.25A 24V DC ZIG-POC-70 user Manual

****** Page 2 ****** Important Safety Instructions 1. Do not use this product near water. 2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 3. Do not install or place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 5. Only use attachments/accessories specified by the manufacturer. 6. To reduce the risk of electric shock and/or damage to this product, never handle or touch this unit or power cord if your hands are wet or damp. Do not expose this product to rain or moisture. 7. Unplug this apparatus during lightning storms or when unused for long periods of time. 8. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 9. Batteries that may be included with this product and/or accessories should never be exposed to open flame or excessive heat. Always dispose of used batteries according to the instructions. 2

****** Page 3 ****** Warranty Information Powered Product Warranty Zigen warrants its powered products against any defects in materials and workmanship for a period of three years from the date of invoice. Touchscreen displays carry a one year parts and labor warranty. If a malfunction occurs during the warranty period, Zigen will repair or replace a product to its original operating condition. A return authorization number must be obtained from Zigen before products are returned for service. Non-Powered and Cable Products – Lifetime Limited Performance Warranty Zigen warrants that its non-powered products and cable products will be free from defects in material and workmanship for as long as you or your customer owns the product. All Zigen non-powered products and cables are designed and engineered to meet and exceed performance specifications. If, at anytime, the product fails due to manufacturer defect, Zigen will repair or replace the product to ensure that it meets original performance specifications. Reduced performance due to normal wear and tear, or damages caused by misuse or negligence will not be covered. Zigen will test and evaluate all non-powered and cable products claimed defective. Products must be shipped to Zigen, prepaid along with proof of purchase only after obtaining a Return Merchandise Authorization (RMA) number from Zigen. This statement of policy is in lieu of any other policy expressed or implied and no representative or person is authorized to assume any other liability or adopt any other policy for Zigen without our written consent. Return Policy If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less shipping and handling. Zigen will not be responsible for shipping and handling of product returns. Returns will only be accepted of products with proof of purchase, products in the original packaging with zero to minimal use and a Return Merchandise Authorization RMA number provided by Zigen. 3

****** Page 4 ****** Contacting Zigen Technical Support Tel: (818) 654-5252 Fax: (818) 654-5355 8:00AM 5:00PM (PST) Email info@zigencorp.com Web zigencorp.com Mailing Address Zigen Corp. c/o Customer Service 16135 Wyandotte Street Lake Balboa CA 91406 USA 4

****** Page 5 ****** Features Supports Supports HDM12.0 & HDCP2.2, and is backward compatible to the previous version Maximum transmission distance is up to 40m for 4Kx2K, and 70m for 1080p Supports CEC, IR and RS232 pass-through for long-distance control Supports bi-directional POC for simplified wiring Supports HDR-IO 5

****** Page 6 ****** Specifications Function HDMI Connector RJ-45 Connector RS232 Connector IR IN IR OUT LED DC Jack Max. Resolution Cable Distance Power Adapter (Min.) Power consumption Operating Temperature Storage Temperature Relative Humidity External Power Supply Enclosure Weight Dimensions (LxHxW) 12 VDC HDMI A-Type Female x 1 RJ-45 Jack x 1 DB9 Female x 1 3.511) Stereo Jack x 1 3.511) Stereo Jack x 1 LED x 3 12 VDC 4K@60Hz / 4K/60Hz 40 m (Max.) 1080P/60Hz 70 m (Max.) 24VDC with lock 20W (MAX) o +500C -10 +500C 00/0 Input: IOOVAC-240VAC, 50/60Hz; 24VDC/1.25A Aluminum 182g 166 x 20 x 84 mm 6 182g

****** Page 7 ****** Packing List The ZIG-POC-70 Mkll is packaged with the following items: 1 x Transmitter 1 x Receiver 1 x 24VDC/1.25A Power Adaptor 1 x IR Receiver 1 x IR Emitter 1 x User Manual If any of these products are not present upon first opening of the package, please contact Zigen or your reseller. 0 2020 Zigen, Corp. All Rights Reserved. All trademarks are the prJperty of their respective owners. Zigen, Corp. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.

****** Page 8 ****** Table of Contents Introduction Introduction Transmitter Front Panel Transmitter Back Panel … Receiver Front Panel Receiver Back Panel Get Started Installation ….. ….. ….. ….. ……………………………… ….. ….. ….. ………… . System Diagram Connection IR Input and Output Interface HDMI Connector Signal Pin Out RJ-45 Wiring Information & Coding One-to-One System Connection Example 10 11 12 13 14 15 16 17 18 19

****** Page 9 ****** Introduction The ZIG-POC-70 Mkll is an ultra-thin HDM12.0 Extender consist of transmitter and receiver. It extends 1080p/4K HDMI signal over CAT-6a cable up to 70m 140m (POC), and enables IR and RS232 pass-through to control source or display device remotely. This extender is equipped with visually lossless video compression technology (VLC) to ensure HD lossless transmission of HDR-IO and 4K@60Hz/4:4:4 over CAT-6a cable. 9

****** Page 10 ****** Transmitter Front Panel 1 2 3 POWER blue LED light LINK – blue LED light HDCP – blue LED light 000 10

****** Page 11 ****** Transmitter Back Panel 1 24VDC/1.25A Support bi-directional POC. 2 HDBT Connect using a CAT-6a cable. 3 IR OUT Connect IR Emitter to send IR signal to source device. 4 Connect to 3rd party control processor IR out to control display device. 5 RS-232 Connect an RS-232 cable from this port to an RS-232 device. 6 HDMI IN Connect to HDMI source. 11

****** Page 12 ****** Receiver Front Panel POWER blue LED light LINK – blue LED light HDCP – blue LED light ooo 12

****** Page 13 ****** Receiver Back Panel 1 24VDc/1.25A Support bi-directional POC. 2 HDBT Connect using a CAT-6a cable. 3 IR OUT Connect IR Emitter to send IR signal to TV / Display. 4 Connect to 3rd party control processor IR out or included IR Receiver Cable to control source or sink devices. 5 RS-232 Connect an RS-232 cable from this port to an RS-232 device. 6 HDMI OUT Connect to HDTV Display. 13

****** Page 14 ****** Installation 1. 2. 3. 4. 5. 6. Be sure to turn OFF source and TV. Connect the HDMI extension cable between HD Source and HDMI In port of the Transmitter. Connect the HDMI extension cable between the HDTV and the HDMI Out port of the Receiver. Connect Cat-6a cable between the Transmitter Link port and the Receiver Link port of the Receiver. Connect the Power adapter to the Receiver or Transmitter and power up the extender Turn on the HD source and HDTV. 14

****** Page 15 ****** System Diagram •rransmitter POC Receiver CA x. HOM RS232. Power HOTV IR Output rr•grn Control 15

****** Page 16 ****** IR Input and Output Interface The ZIG-POC-70 Mkll Input and Output interface circuitry is identical to both RX and TX. The IR input supports Infrared Receivers as well as IR output electrical interfaces from Control Systems. IR Inputs When using Infrared Receivers, it is recommended to use the included Zigen IR Receiver with the proper 3.5mm Jack pin out: 1. Tip = Signal 2. Ring = Power 3. Shield = GND +5VDC GND When interfacing with the electrical IR outputs from Control Systems, use a 2 pin 3.5mm Jack with the following pin out: 1. Tip = Signal 2. Ring/ShieId = GND 3. IR In GND Control system electrical interfaces vary greatly with adjustable signals ranging from 3V up to 24V. For ZIG-POC-70 Mkll to properly decode the IR serial data, it is important to adhere to the following logic thresholds: 1.5 volts for logic 1. Adjust the control system’s IR Output signal levels if required to meet the threshold requirements of ZIG-POC-70 Mkll. 16

****** Page 17 ****** HDMI Connector Signal Pin Out 19 17 15 13 11 1 18 14 12 10 d 6 4 Pin 1 2 3 4 5 6 7 8 9 10 Signal TMDS Data 2+ TMDS Data 2 Shield TMDS data 2 TMDS Data 1+ TMDS Data 1 Shield TMDS Data 1 – TMDS Data 0+ TMDS Data 0 Shield TMDS Data O – TMDS Clock + Pin 11 12 13 14 15 16 18 19 17 Signal TMDS Clock Shield TMDS clock – CEC Reserved (N.C. on device) SCL SDA DDC/CEC Ground +5 power Hot Plug Detect (HPD)

****** Page 18 ****** RJ-45 Wiring Information & Coding 3 56 8 Looking into connector for Conductor Identification pair 1 pair 2 Pair 3 pair 4 RJ-45 Plug Assignment 5 4 1 2 3 6 7 8 18 Pin Color Code Conductor White-Blue Blue White-Orange Orange White-Green White-Brown Brown

****** Page 19 ****** One-to-One System Connection Example HDBaseT Transmitter EXTENDER “-oc;p HOR. to RS-232 HDMI IN CAT-6a Recommended Extend HDMI signals up to – 2160p: 40 m. / 131 ft. – 1080p: 70 m. / 230 ft. 19 HDBaseT Receiver 18-GBPS HOV’ EXTENOER RS-232 HDMI OUT


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.