FREE ENGLISH ZEEGMA PLANEET CHEF (01) PDF USER GUIDE
FREE ENGLISH ZEEGMA PLANEET CHEF (01) PDF USER MANUAL
FREE ENGLISH ZEEGMA PLANEET CHEF (01) PDF OWNER GUIDE
FREE ENGLISH ZEEGMA PLANEET CHEF (01) PDF OWNER MANUAL
FREE ENGLISH ZEEGMA PLANEET CHEF (01) PDF REFERENCE GUIDE
FREE ENGLISH ZEEGMA PLANEET CHEF (01) PDF INSTRUCTION GUIDE
FREE ENGLISH ZEEGMA PLANEET CHEF (01) PDF REFERENCE MANUAL
FREE ENGLISH ZEEGMA PLANEET CHEF (01) PDF INSTRUCTION MANUAL
FREE ENGLISH ZEEGMA PLANEET CHEF (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD ZEEGMA PLANEET CHEF (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
ZEEGMA PLANEET CHEF (01) PDF SUMMARY:
What should I do before using the device?
Before you start using the device, please read the manual and follow its tips. The operating manual must be kept for future reference.
What are the intended uses of the device?
The device is intended for home use only. It must not be used for other purposes, at variance with the intended use. The product is not intended for commercial use. The product must not be used outdoors.
Where should I keep the device?
The device must be kept away from sharp edges, sources of heat and moisture. It must not be exposed to direct sunlight.
Can the device be immersed in water or other liquids?
No, do not immerse the product in water or other liquids.
What should I do if the device is wet?
If the product is wet, immediately unplug it.
What should I do after using the device?
After use, when you clean, change its accessories, assemble or disassemble the device, it must be switched off and unplugged.
How should I disconnect the plug from the socket?
When you disconnect the plug from the socket, always pull a plug, never a wire, and hold the socket with another hand at the same time.
Should I leave the device unattended?
No, do not leave the active device unattended.
What should I do if the device is damaged?
Check the device for damage on a regular basis. Do not use the device when it is damaged. Do not try to repair the device on your own – contact the authorized service center. If the feeder cable is damaged, it should be replaced by the manufacturer to avoid hazards.
Should I modify the device in any way?
No, do not modify the device in any way.
What type of spare parts should I use?
Use original spare parts only.
What should I do with the plastic packaging?
Small children should not play with the plastic packaging. To prevent suffocation, keep the packaging (plastic bags, boxes, polystyrene foam) out of reach of children.
Who should not use the device?
The device is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or instructed on safe use of the device.
Is the device a toy?
No, the device is not a toy. Children should not play with the device.
Can children clean and maintain the device?
Children aged 8 upwards may clean and maintain the device only if supervised. The device and electric wire must be kept out of reach of children below the age of 8.
Can I use external devices with the product?
NOTE! To avoid hazards related to unintentional resetting of thermal cut-out, this device must not be supplied through external devices, i.e., timer or circuit which activates and deactivates regularly; this may lead to damage to the product.
What should I not put into the device when it operates?
Do not put anything into the device when it operates.
What kind of surface should I use the device on?
The surface on which the device is used must be flat, smooth, and stable.
When should I connect the device to a power source?
Do not connect the device to source of power before you assemble all required accessories.
How do I lift the arm of the device?
To lift the arm of the device, turn the interlock release knob in a clockwise direction.
How do I place the pan cover on the device?
Place the pan cover on the device.
How do I place the pan in the device?
Place the pan in the device and turn in a clockwise direction until it clicks.
How do I fix the desired part (hard dough stirring hook, stirrer, or beater)?
To do so, place it on the drive shaft and turn in an anti-clockwise direction until it clicks.
How much should I fill the pan?
Place ingredients in the pan. Do not overfill the pan.
How do I lower the arm of the device?
Lower the arm of the device with the interlock release knob.
How do I power the device?
Insert the main plug in the relevant electric socket (220-240 V ~ 50/60Hz).
How do I switch on the device?
Switch the device on by setting the desired speed (1-6) of the speed adjustment.
How do I set the pulsating mode?
To set the pulsating mode (kneading dough in short periods), set the speed adjustment as „P” and keep this position as long as you need. The released adjustment returns to „0” automatically.
How do I switch off the device?
When you achieve the desired result, turn the speed adjustment back to „0”. Disconnect the plug from the socket.
How do I lift the arm of the device after it is switched off?
Slide the interlock release knob downwards to lift the arm of the device.
How do I remove the mixed ingredients from the pan?
Now you can take the mixed ingredients out of the pan with the use of a spatula.
How do I take the pan out of the device?
Now you can take the pan out of the device.
What is the recommended speed and time for using the hard dough stirring hook?
| Use | Speed | Time (min) | Max. Application |
|---|---|---|---|
| Hard dough stirring hook | 1-2 | 3-5 | 1000g of flour and 500ml of water Raised (yeast) cake |
What is the recommended speed and time for using the stirrer?
| Use | Speed | Time (min) | Max. Application |
|---|---|---|---|
| Stirrer | >4 | 3-10 | 660g of flour and 840ml of water Creams, cakes |
What is the recommended speed and time for using the beater?
| Use | Speed | Time (min) | Max. Application |
|---|---|---|---|
| Beater | >6 | 3-10 | 3 egg whites (minimum) Egg white, cream |
What should I do if the device does not work?
- Make sure the device is properly connected to power supply.
- Make sure the interlock release knob has returned to the initial position.
- If the device has operated continuously for 6 minutes, let it cool down.
What should I do if there is a wrong sound in the pan when the device operates?
- Make sure the pan is properly mounted.
- Make sure the accessories you’ve chosen have been properly fixed.
What should I do if the pan cover does not cover it properly?
- Make sure the cover has been properly placed on the pan.
- Make sure the pan has been properly fixed and secured on the device.
What should I do if some speeds do not work in the device?
If the speed does not work – set the adjustment back at „0”, wait for a couple of minutes, and try again.
What should I do if the device moves when operating?
- Make sure the anti-skidding leg is not detached.
- Make sure the device has been positioned on a flat and smooth surface.
What should I do if the interlock release knob has not returned to the initial position after fixing the pan and cover?
- Make sure the cover has been properly positioned on the pan.
- Make sure the pan has been properly mounted.
What should I do before cleaning the device?
Before you start cleaning, unplug the power cord.
Can I immerse the body of the device in water?
Never immerse the body of the device in water.
What type of cleaning agents should I avoid when cleaning the device?
Do not use abrasive substances or aggressive cleaning agents.
How should I clean the external side of the body of the device?
To clean the external side of the body of the device, use a wet cloth only.
How should I clean the pan and accessories?
The parts that come into contact with food may be washed with a dishwashing liquid. The accessories may be washed in a dishwasher. Before reuse, leave the parts to dry.
CLICK HERE TO DOWNLOAD ZEEGMA PLANEET CHEF (01) PDF MANUAL