GEEK CHEF GT606-M08 (01) PDF MANUAL

GEEK CHEF GT606-M08 (01) PDF SUMMARY:

How do I turn the sound on or off?

Press and hold the “KEEP WARM/ CANCEL” Key for 3 seconds to turn sound OFF. Press and hold the “KEEP WARM/ CANCEL” Key for 3 seconds to turn sound ON.

What should I do if the Pressure Limiting Valve on the lid is loose?

Nothing is wrong. Make sure the pressure Limiting Valve is set to Airtight and the Lid is locked securely.

What do I do if nothing happens when I select a Menu Button?

Once you have selected the Menu Button, simply leave the unit alone and it will start to heat and build up pressure. Once the unit has built up enough pressure, the display will change to a countdown timer that displays your desired cooking time of the Menu Button you selected. This is the time the unit will start cooking the food. Pressurizing can take anywhere from 5 minutes to up to 40 minutes depending on the quantity and weight of food you are cooking.

Why is the pressure cooker just sitting there and nothing appears to be happening after I programmed it to cook?

The unit is still building pressure. This can take between 5-40 minutes depending on the quantity and weight of food in the pressure cooker.

What is the clear plastic part that came with my pressure cooker?

It is the Condensation Cup: Refer to instruction on pages 8 to attach the condensation cup to the back of the pressure cooker.

What should I do if my food is burned at the bottom of the inner pot?

There is not enough liquid in the inner pot. Add more liquid to your inner pot contents.

What should I do if the unit is dead or has no power?

The fuse in the unit has shorted out. This happens if the unit is cooked without enough liquid in the inner pot or if there is too much electrical current going to the cooker. Contact customer service for a replacement fuse.

What do I do if I’m having trouble closing the lid?

• Re-position the sealing ring.
• Gently push the Float valve down.

What do I do if I’m having trouble opening the lid?

Gently push the Float valve down. The pressure has not been fully released.

What should I do if the display shows E3?

Overheating is detected. Press CANCEL to stop cooking and check if food at the bottom of the inner pot is burnt.

What do I do if the display is blank after plugging in the power cord?

• Check the power cord from the pressure cooker to the wall outlet to ensure a good connection.
• Contact customer service for a replacement fuse.

What do I do if my rice is only partially cooked or is too hard?

Didn’t use enough water. Adjust rice to water ratio according to recipe.

What do I do if my rice is mushy or watery?

Used too much water. Adjust rice to water ratio according to recipe. After cooking cycle is complete, leave the lid on for an extra 5 minutes.