XPOWER X-600A (01) PDF MANUAL

XPOWER X-600A (01) PDF SUMMARY:

What are the features of the XPOWER Air Movers?

• Low amp draw with a rated volume of 2400 to 2800 on High.
• Super quiet motor and super lightweight.
• Easy carrying handle.
• Easy and quick to disassemble for thorough cleaning and service.
• Power cord lengths are 20’ for P models and 25’ for X models.
• Easy cord wrap on handle.
• Safety screens on open vents.
• 3 speed switch.
• Durable and rugged housing with 5 Years Warranty.
• Luggage handle and wheels for “H” series models.
• Carpet clamp for “C” series models.
• Timer and filter for “TF” series models.
• 3 air-flow positions for “H” series models (0°, 20° Kickstand, 90°).
• 4 air-flow positions for other models (0°, 20° Kickstand, 45°, 90°).

---

What are XPOWER Air Movers intended for?

XPOWER Air Movers are intended to move air and to dry floors, walls, furniture, etc. Durable and easy to operate with an effective balance of static pressure and airflow, the units are suitable for a variety of applications.

---

What should I do before plugging the unit into the power source?

Prior to plugging the unit into the power source, inspect completely for any shipping damage.

---

What should I plug the electrical cord into?

Plug the electrical cord into a standard grounded outlet.

---

Where should I place the Air Mover unit?

Carefully place the Air Mover unit on a stable, flat dry surface.

---

How do I turn on the unit and change the speed?

Turn the switch to desired speed, while making sure unit operates normally.

---

What is the notice about using the unit near children?

To reduce the risk of injury, close supervision is necessary when the unit is used near children. Do not allow children to play with the unit.

---

Can the units be stacked?

Units without “H” can be stacked (up to 4) on their sides. Units with “H” can be stacked (up to 3) on their sides.

---

How many different angles can the unit be used at to direct air flow?

The unit is capable to be used at 4 different angles to direct air flow, except that the unit with handle is at 3 different angles.

---

What should I do to prevent electric shock?

To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water.

---

What should I do to avoid the risk of injury?

To avoid risk of injury, do not direct air flow at face or any part of body.

---

What is the warning about using the Air Mover with a solid-state speed control device?

To reduce the risk of fire or electric shock, do not use the Air Mover with any solid-state speed control device.

---

What kind of receptacles should I use with the air mover?

Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.

---

What should I do if the Air Mover has a damaged cord or plug?

Do not operate any Air Mover with a damaged cord or plug. Discard the unit or return it to an authorized service facility for examination and/or repair.

---

What should I do before servicing the air mover?

It’s automatically operated device. To reduce the risk of injury disconnect from power supply before servicing.

---

What should I not do with the power cord?

Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or similar coverings. Do not route the power cord under furniture or appliances. Arrange the power cord away from traffic area and where it will not be tripped over.

---

When not in use, where should I store the Air Mover?

When not in use, unplug and store the Air Mover in a dry indoor place out of reach of children.

---

How do I keep the Air Mover clean?

To keep the Air Mover clean, use a damp cloth to wipe the surface of the housing. Never clean the Air Mover with water.

---

What should I always do before performing any maintenance or cleaning?

Always disconnect the Air Mover from its power source before performing any maintenance or cleaning.

---

How often should I clean the optional filters?

Clean the optional filters as often as necessary to avoid loss of airflow.

---

What should I do if the air mover is not running?

• Plug in the Air Mover; check circuit breaker.
• Turn on switch.
• Remove material jamming fan wheel.

---

What should I do if the air mover is overheating?

Turn unit off and allow to cool, then remove blockage.

---

What should I do if the air mover vibrates?

Clean Air Mover fan blades.

---

How do I clean the filters?

Remove filters from the unit and wash with warm soapy water, rinse with clean water and let dry thoroughly before reinstalling.

---

How do I install the filters?

Filters snap into the air inlets.

---

How do I remove the filters?

Pull the filters out of the blower.

---

What does the XPOWER Limited Warranty cover?

XPOWER’s Limited Warranty covers the unit (excludes POWER CORD AND FILTER) from defects in material and craftsmanship.

---

What does the Warranty cover?

The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor and one way shipping. Non-contiguous states must pay for roundtrip freight. A purchase receipt must be provided.

---

What does this warranty not cover?

This warranty does not cover or apply to defects due directly or indirectly to misuse, abuse, disassembly, alteration, corrosive chemicals, improper voltage, fire, flood, negligence, accident, improperly or incorrectly performed maintenance or repair, or failure to perform necessary maintenance or repair, or if the use of this product is not in compliance with the instructions and specifications for its use.

---

What do I need to do for Warranty service and parts replacement (US users only)?

• Call 1-855-855-8868 for a RMA (Return-Merchandise-Authorization) number.
• Have original proof of purchase.
• Use the original undamaged packaging or an industrial certified packaging method.

---

What is the end user responsible for when shipping the unit to the XPOWER Service Department?

End user will be responsible to ship the unit (with RMA Number showing on the shipping label) to the XPOWER Service Department. XPOWER to inspect, assess and advise the repairs needed and the applicable cost, if any.

---

How are XPOWER Air Mover Model X-600A/P-600A daisy chainable?

XPOWER Air Mover Model X-600A/P-600A are daisy chainable with a low 3.8 amp draw. The 12-amp on-board circuit breaker will allow two (2) additional same units to run on one circuit at the same time.

---

What happens if the auxiliary outlet overloads?

Air Mover has an on-board circuit breaker. If the auxiliary outlet overloads, the circuit breaker will trip. If the breaker trips, unplug the units and press the circuit breaker reset button. Plug the units back into the power source and turn on the switch.