FREE ENGLISH XPOWER X-4700A (01) PDF USER GUIDE
FREE ENGLISH XPOWER X-4700A (01) PDF USER MANUAL
FREE ENGLISH XPOWER X-4700A (01) PDF OWNER GUIDE
FREE ENGLISH XPOWER X-4700A (01) PDF OWNER MANUAL
FREE ENGLISH XPOWER X-4700A (01) PDF REFERENCE GUIDE
FREE ENGLISH XPOWER X-4700A (01) PDF INSTRUCTION GUIDE
FREE ENGLISH XPOWER X-4700A (01) PDF REFERENCE MANUAL
FREE ENGLISH XPOWER X-4700A (01) PDF INSTRUCTION MANUAL
FREE ENGLISH XPOWER X-4700A (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD XPOWER X-4700A (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
XPOWER X-4700A (01) PDF SUMMARY:
What should I do before operating the air scrubber?
Before operating, remove all packaging material and check for any damage that may have occurred during shipping or any missing items. Check the household power supply to ensure it matches the appliance’s specification.
What should I do if the power cord or plug is damaged?
Do not operate any fan with a damaged cord or plug. Discard the fan or return it to an authorized service facility for examination and/or repair.
Where should I use the air scrubber?
Use only on GFCI-protected receptacles. Contact a qualified electrician for verification and/or installation of a GFCI receptacle if necessary.
Where should I place the power cord?
Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area and where it will not be tripped over.
With what type of speed control device should I NOT use the X-2380, X-2580, X-2480A, X-3380, and X-3580 models?
To reduce the risk of fire or electric shock, do NOT use these appliances with any solid-state speed control device.
With what type of speed control can I use models X-3400A, X-4700A, and X-4700AM?
These models are suitable for use with solid-state speed control.
What should I do if my hands are wet?
Do NOT touch this appliance or the plug with wet hands or while standing in water.
Where should I avoid operating the appliance?
Do NOT operate the appliance in any pooled water. Do NOT use the product in areas where gasoline, paint, or other flammable goods and objects are used or stored.
What should I avoid inserting into the appliance?
Do NOT insert or allow objects to enter any ventilation or exhaust opening, as this may damage the appliance and void the warranty.
What should I avoid covering on the appliance?
Do NOT cover the air inlet or outlet on the appliance.
Where should I avoid directing airflow?
Do NOT direct the airflow at human faces or bodies.
Should children be allowed to play with the appliance?
Do NOT allow children to play with this appliance.
What should I do before servicing the air scrubber?
To reduce the risk of injury, disconnect it from the power supply before servicing, as it is an automatically operated device.
How should I remove the power cord from the electrical receptacle?
Remove the power cord from the electrical receptacle by grasping and pulling on the power cord plug-end only; do NOT pull the cord directly.
Should I attempt to repair the appliance myself?
Do NOT attempt to repair or adjust any electrical or mechanical functions of this appliance, as this may cause danger and void the warranty.
What should I do if the appliance is damaged or malfunctions?
If the appliance is damaged or malfunctions, do NOT continue to use it. Unplug the product from the electrical outlet. Refer to the troubleshooting guide or contact XPOWER.
Where should I store the air scrubber when not in use?
Store it in a dry area, away from exposure to sunlight, extreme temperature and humidity, or other extreme environments.
How many units of this appliance can I stack?
Do NOT stack more than five units of this appliance.
How do I turn the unit ON or OFF and set the speed for models X-3400A/X-4700A/X-4700AM?
- Turn to the “OFF” position to switch the Air Scrubber OFF. Turn to any speed position to switch the Air Scrubber ON.
- Turn clockwise to set the desired speed. “MAX” means the highest speed, and “MIN” means the lowest speed.
How do I turn the unit ON or OFF and set the speed for models X-2380/X-2480A/X-2580/X-3380/X-3580?
- Turn to “OFF” position to switch the Air Scrubber OFF. Turn to any speed position to switch the Air Scrubber ON.
- Turn clockwise to set the desired speed. There are 5 speeds from: 5, 4, 3, 2, 1. “5” is the highest speed and “1” is the lowest speed.
What does the filter clean/change light indicate?
This indicates that the filters have exceeded the maximum capacity of particles, and the filtration efficiency has diminished. You should clean or replace the filters.
What should I do before using the foam cover?
Before use, please take off the foam cover; otherwise, it will cause abnormal motor operation and failure.
What should I do after using the foam cover?
After use, please put back the foam cover.
What does the hour meter show?
The hour meter shows the total running time from the first usage to the current moment.
How does the activity indicator behave when the machine is on?
When the machine turns on, the activity indicator will blink. The running time starts to count.
How does the activity indicator behave when the machine is off?
When the machine is off, the activity indicator will stay illuminated.
Can the hour meter value be reset?
The value can’t be reset. When the value exceeds 9999.9 hours, it will start over from 0 again.
Can other appliances be plugged into the additional electrical receptacles?
Other appliances can be plugged into the additional electrical receptacles and will operate whether the Air Scrubber is on or off. However, the total amperage must be lower than the amperage instructed. Different models may have varying instructions.
What should I do if the Air Scrubber or the plugged-in appliance stops working?
Press the Circuit Reset Button to reset the circuit.
What happens when a ground fault occurs with a GFCI-protected additional electrical receptacle?
Once a ground fault occurs, the GFCI will immediately interrupt the power connection to the additional electrical receptacle. Consult the Troubleshooting Guide.
What is a ground fault?
A ground fault is an inadvertent contact between an energized conductor (for example, a human being) and ground or equipment frame.
How should I test the GFCI before each use?
Press the Test Button and then press the GFCI Reset Button; the Test Button should be reset to the unpressed position. If the Test Button does not react as stated above, consult the Troubleshooting Guide.
What should I do before performing any maintenance or cleaning?
Always disconnect the Air Scrubber from its power source.
How should I store the air scrubber when not in use?
When not in use, unplug, remove all the extension, and cover the intake with the foam cover. Store the appliance in a dry and cool indoor place. Make sure it’s out of reach of children.
How should I clean the machine?
Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water directly. Check if the grille covers are clean. Remove dirt or any other objects that could block the air inlet and air outlet.
How many units of this appliance can I stack?
Do not stack more than five units of this appliance.
How should I carry the air scrubber?
Lift the Air Scrubber with the handle on the top of the housing.
How many air scrubbers can I stack in a carrier for transport?
You can stack up to 5 Air Scrubbers and transport.
When should I replace or clean the filters?
To ensure the best filtration efficiency and to prevent secondary pollution of used filters, you should replace or clean the filters frequently or when the filter change light illuminates.
How should I organize the cord?
Wrap the power cord around the intake for storage after use. Use a convenient clip at the end of the cord to secure it in place.
How do I clean Nylon Mesh Filters/Washable Filters?
These filters are washable with water. Use a vacuum or clean cloth to remove loose debris. Then, further clean the filter with water. Use a cloth to remove the water on the filter and dry it naturally in the air. If the filter clean/change light illuminates, you might need to clean the filter.
How do I clean Pleated Media Filters?
This filter is not washable. Use a vacuum to remove loose debris. If the filter clean/change light still illuminates, you might need to replace the filter.
How do I clean Carbon Filters?
This filter is not washable. Use a vacuum to remove loose debris. Lay it flat on a clean and dry surface under the sun for 3 hours. Sunshine will help remove various substances absorbed in the carbon with an appropriate temperature. If the filter clean/change light still illuminates or a decline of effectiveness is noted, you might need to replace the filter.
How do I clean HEPA Filters?
This filter is not washable or reusable. Highly concentrated particles are captured by the HEPA filter, and cleaning this filter can be hazardous to human health and contaminate the nearby environment. You must replace the filter if all the other filters are clean and the filter clean/change light still illuminates.
How should I store the filter?
When not in use for a long time, you should store the filter separately from the machine. Always clean the filters before storage. Place the filters in a sealed plastic bag and store it in a dry and cool indoor place.
How should I reload the filters?
To ensure the best efficiency and lifespan, each filter must be reloaded in the correct position, sequence, and orientation.
Where should the Outer Nylon Mesh Filter be placed?
The Outer Nylon Mesh Filter (if applicable) must be placed on the intake.
Where should other filters be loaded?
Other filters must be loaded inside the Air Scrubber.
How can I check the installation sequence?
See “Filters” to check the installation sequence.
How should the last stage filter be loaded?
The last stage filter must be loaded with the EVA side facing the machine housing. The EVA sealing pad ensures that all the air is filtered.
What do the labels with arrows on the filters indicate?
On one side of each filter, there is a label with an arrow showing the airflow direction. When placing the filter, the side with the label should face up. The arrow on the label should point to the blue housing.
What should I do if the air scrubber does not start?
Check for a power supply. Remove and reconnect the power cord. If equipped with an additional electrical receptacle, remove all appliances and press the circuit reset button.
What should I do if the unit runs but has no or very low air movement?
Remove any blockage from the air outlet. Clean or replace the loaded filters.
What should I do if the additional electrical receptacle has no power?
If equipped with an additional electrical receptacle, remove all appliances and press the circuit reset button. If a ground fault causes a power interrupt by GFCI, turn off and unplug the Air Scrubber, remove all appliances on the additional electrical receptacle, and press the GFCI reset button.
CLICK HERE TO DOWNLOAD XPOWER X-4700A (01) PDF MANUAL