XPOWER P-200AT (01) PDF MANUAL

XPOWER P-200AT (01) PDF SUMMARY:

What should I do before operating the air mover?

Before operating, remove all packaging material and check for any damage that may have occurred during shipping or any missing items. Check the household power supply to ensure it matches the appliance’s specification.

---

What should I do if the power cord or plug is damaged?

DO NOT operate any fan with a damaged cord or plug. Discard fan or return it to an authorized service facility for examination and/or repair.

---

What type of electrical receptacle should I use?

Use only on GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.

---

What should I NOT do with the power cord?

• DO NOT run the cord under carpeting.
• DO NOT cover the cord with throw rugs, runners, or similar coverings.
• DO NOT route the cord under furniture or appliances.
• Arrange the cord away from traffic areas and where it will not be tripped over.

---

To reduce the risk of fire or electric shock, what type of speed control device should I avoid using?

To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control device.

---

What should I NOT touch with wet hands or while standing in water?

DO NOT touch this appliance or the plug with wet hands or while standing in water.

---

Where should I NOT operate the appliance?

• DO NOT operate the appliance in any pooled water.
• DO NOT use the product in areas where gasoline, paint, or other flammable goods and objects are used or stored.

---

What should I NOT insert into the ventilation or exhaust opening?

DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage the appliance and void the warranty.

---

What should I avoid covering on the appliance?

DO NOT cover the air inlet or outlet on the appliance.

---

What should I avoid directing the airflow at?

DO NOT direct the airflow at human faces or bodies.

---

What should I do before servicing the air mover?

AUTOMATICALLY OPERATED DEVICE – To reduce the risk of injury, disconnect from the power supply before servicing.

---

How should I remove the power cord from the electrical receptacle?

Remove the power cord from the electrical receptacle by grasping and pulling on the power cord plug-end only, DO NOT pull the cord directly.

---

What should I NOT attempt to do with the air mover’s electrical or mechanical functions?

DO NOT attempt to repair or adjust any electrical or mechanical functions of this appliance, as this may cause danger and void the warranty.

---

What should I do if the appliance is damaged or malfunctions?

If the appliance is damaged or it malfunctions, DO NOT continue to use it. Unplug the product from the electrical outlet. Refer to the troubleshooting guide or contact XPOWER.

---

Where should I store the air mover when not in use?

Store in a dry area, away from exposure to sunlight, extreme temperature and humidity, or other extreme environments, when not in use.

---

How many units of this appliance can I stack?

DO NOT stack more than four units of this appliance.

---

How do I dry a floor with a single air mover unit?

Place the air mover at the corner to create circular airflow.

---

How do I dry a floor with multiple air mover units?

Place the air movers at four corners to create circular airflow.

---

How do I operate the air mover at different positions?

The air can operate at different positions, directing the airflow to desired areas.

---

How do I switch the air mover ON and OFF?

Turn to “OFF” position to switch the air mover OFF. Turn to any speed position to switch the air mover ON.

---

How do I set the fan speed?

Turn clockwise to set the desired fan speed. There are 3 fan speeds from: 1, 2, 3. “1” is the lowest speed and “3” is the highest speed.

---

How do I use the timer switch?

Turn clockwise to set the timer for minutes count down to an automatic stop. The timer can be set for up to 180 minutes (3 hours). When the timer reaches “0” position, the unit stops working. On “ON” position, it will work constantly. The timer switch function does not apply to all models.

---

What is the function of the reset button?

If the air mover or the plugged-in appliance stops working, press the RESET BUTTON to reset the circuit.

---

Can other appliances be plugged into the additional electrical receptacles?

Other appliances can be plugged into the additional electrical receptacles and work whether the air mover is on or off. However, the total amperage must be lower than the amperage instructed. Different models may have varying instructions.

---

What maintenance is recommended for this appliance?

Frequent maintenance is recommended on this appliance. Failure to follow the maintenance instructions may cause failure of the appliance and void the warranty.

---

What should I do before performing any maintenance or cleaning?

Before performing any maintenance or cleaning, always disconnect the air mover from its power source.

---

How do I clean the air mover?

• Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water directly.
• Check if the grille covers are clean. Remove dirt or any other objects that could block the air inlet and air outlet.

---

What should I check if the air mover does not start?

• No electricity. Check for power supply.
• The power cord is not properly plugged in. Remove and reconnect the power cord.
• The machine is working under an extreme temperature. Turn off the machine and unplug it. Let the machine cool down to normal temperature.
• The circuit breaker on the additional electrical receptacle (Daisy chain) jumps. Remove all appliances on the additional electrical receptacle and press “Reset”.
• The timer switch is set to “0” position. Set the timer switch to “ON” position.

---

What should I check if the unit runs but the speed is abnormal?

Air inlet or air outlet is blocked. Remove blockage.

---

How do I stack multiple units for storage?

• Stack the air movers on the sides. Align the air inlets of both air movers.
• Turn the second air mover 30°.

---

How do I organize the cord for storage?

• Wrap the power cord around the switch plate for storage after use.
• Use convenient clip at the end of the cord to secure in place.