VOLKSWAGEN RABBIT 2009 (01) PDF MANUAL


3.0
Rated 3 out of 5
3 out of 5 stars (based on 1 review)
VOLKSWAGEN RABBIT 2009 (01) PDF MANUAL

Click here to download VOLKSWAGEN RABBIT 2009 (01) PDF MANUAL


PDF Summary:

VOLKSWAGEN RABBIT 2009 (01) PDF MANUAL
Instructions for Key Reprogramming
Volkswagen Golf, Rabbit, GTI, Passat, CC 2009 – earlier
Note: You Must have all customer keys present along with any additional
keys requested, before you begin the reprogramming procedure as there is a
timer involved during the key coding. If the customer has a spare key not
present at the time of coding, it will no longer be programmed to the vehicle.
1. Connect a Battery Charger to the vehicle.
2. Connect the LAN line to the VAS *052.
3. Connect the DLC cable from the VAS 5052 to the vehicle.
4. Select “Guided Fault Finding”
5. Turn ON the ignition switch.
6. Select Volkswagen or Audi on the VAS 5052 display screen.
7. Sel*c* the *ehicle type.
8. Select the Model year.
9. Select the engine code. The engine code can be found on the spare tire cover
on most Volkswagen models.
10. Confirm the vehicle information, select OK.
11. Select “Page Forward” button.
a. Select “Done” button.
12. The VAS 5052 will perform a module search for fault codes. If there are any
communication or internal module fault codes* they Must be rep*ired before
you can continue with this procedure.
13. Select the “Go To” button at the bottom of the screen.
14. *rom*the *op up wind**, sel**t Functi*n/Comp**ent.
15. Select “Body.”
16. Select “Electrical systems.
17. Selec* “Systems*Capable of Self*D*agnosis.”
18. Select “Immobilizer 4A download. (“Immobilizer 4D download” for Passat,
CC)
1*. Select *Adapt Keys” and page forward.
20. Select “Adapt Keys” from the Pre condition screen.
21. Select “Done”
22. *nte* the cus*omer’s name, select OK.
23. Enter the work order number.
24. *nter the Country code. 444 for the U.*. or 999 for Canada.
25. Enter the Service Facility I.D. and password.
26. The reprogramming will begin. You will be prompted to insert into the ignit*on
switch each key that is to be programmed to the vehicle. This is a timed
function. If you do not complete all keys before the timer “times out” you must
start over from the beginning.

FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL


VOLKSWAGEN RABBIT 2009 (01) PDF MANUAL
VOLKSWAGEN RABBIT 2009 (01) PDF MANUAL

Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to top