Free English URBANISTA MELBOURNE (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD URBANISTA MELBOURNE (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I turn the URBANISTA MELBOURNE on or off?
To turn on your URBANISTA MELBOURNE speaker, press and hold the On/Off button for 3 seconds. To turn it off, press the power button for 3 seconds.
How do I sync the URBANISTA MELBOURNE with a Bluetooth device?
To turn on your URBANISTA MELBOURNE speaker, press and hold the On/Off button for 3 seconds. The small blue light in the above panel will show continuous blinking.
Switch on Bluetooth from your phone or your computer and search for “Urbanista Melbourne”. Once the blue light stops blinking, the two devices are paired and you can start using URBANISTA MELBOURNE for listening to music or receive phone calls.
You may also press the bluetooth pairing button for 3 seconds to initiate sync.
How do I adjust the volume on the URBANISTA MELBOURNE?
Press the + or – buttons to adjust the volume.
How do I establish a new Bluetooth connection on the URBANISTA MELBOURNE from off mode?
In the off mode, press and hold the multifunction button for 10 seconds until you hear a beep repeated three times and the blue LED flashes.
How can I connect a device to the URBANISTA MELBOURNE if it does not support Bluetooth?
If your device does not support Bluetooth you can connect it to your URBANISTA MELBOURNE speaker by using the 3.5mm audio jack connector.
How do I charge the URBANISTA MELBOURNE?
To charge the batteries of URBANISTA MELBOURNE, connect the complimentary cable A to the micro USB connection and the USB to a power source.
What are the technical specifications for the URBANISTA MELBOURNE?
Playing Time: 6 hours
Charging Time: 2 hours
Bluetooth Distance: 10 meters
Bluetooth Version: 4.0
Water Resistance: IPX4
Standby Time: 30 Hours
CLICK HERE TO DOWNLOAD URBANISTA MELBOURNE (01) PDF DOCUMENT