Free English SONY DTC-1000ES (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SONY DTC-1000ES (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What symptom indicates a problem with the brake shoe on the SONY DTC-1000ES?
On the SONY DTC-1000ES, the symptom occurs when the brake shoe attaches itself to the reel table and binds the reel motor.
How do I resolve the brake shoe binding issue on the SONY DTC-1000ES?
If the brake shoe binds the reel motor on the SONY DTC-1000ES, you must exchange the left and right brake lever assemblies according to the specific service procedure.
What is the procedure for exchanging the brake lever assemblies on the SONY DTC-1000ES?
To exchange the left and right brake lever assemblies on the SONY DTC-1000ES, follow these steps:
1. Remove three screws and open the board.
2. Remove two screws from bottom plunger mounting board and take plunger assembly out.
3. Remove spring.
4. Remove three retaining rings to take three levers out.
5. Wipe the surrounding of motor with alcohol.
6. Exchange Brake Lever Assembly Left and Right for the new type.
7. Put Brake Lever Assembly Left and Right back in its place and hold it by retaining ring. Note: Distorted retaining ring has to be replaced.
8. Fasten spring.
9. Mount brake arch and hold it by retaining ring.
10. Fix Plunger Assembly with two screws and lock them. No need for positioning adjustment.
11. Put board back in its place and fasten three screws.
What are the part numbers for the new brake lever assemblies needed for the SONY DTC-1000ES?
When exchanging the assemblies on the SONY DTC-1000ES, use the following parts:
| Description | Part Number |
|---|---|
| Brake Lever Assembly, Left | A-4910-211-A |
| Brake Lever Assembly, Right | A-4910-212-A |
CLICK HERE TO DOWNLOAD SONY DTC-1000ES (01) PDF DOCUMENT