ULTRASPORT UMOVE HD 60 (01) PDF Document

The main buttons and ports on the ULTRASPORT UMOVE HD 60 are:

1. Power / Mode Button: Turns the camera on/off and cycles through modes.

2. Operating Indicator: Light that indicates the camera’s status.

3. OK Button: Used to confirm selections and start/stop recording.

4. Microphone: Captures audio.

5. Micro SD Card Slot: For memory card insertion (card not included).

6. HDMI Port: For connecting to a TV (cable not included).

7. USB Port: For charging and data transfer.

8. Lens: The camera lens.

The back of the ULTRASPORT UMOVE HD 60 features:

1. Changing indicator: Indicates charging status.

2. Operation indicator: Indicates camera is operating.

3. Screen: The display screen.

4. UP button: Navigates up in menus.

5. Down button: Navigates down in menus.

6. Speaker: For audio playback.

On the bottom of the ULTRASPORT UMOVE HD 60, you will find:

1. Battery Cover: The door to the battery compartment.

2. Battery Cover Lock: The latch that secures the battery cover.

The buttons on the waterproof case for your ULTRASPORT UMOVE HD 60 have the following functions:

1. OK Button: Press to confirm selections or start/stop recording.

2. UP Button: Press to navigate up in menus.

3. Down Button: Press to navigate down in menus.

4. Waterproof case Lock: Secures the case to keep it waterproof.

5. Lens: The protective lens cover.

6. Power/ Mode Button: Press to turn the camera on/off or switch modes.

1. Remove camera from housing: Open the waterproof case to take the camera out.

2. Insert Micro SD Card: Choose a branded Micro SD card, format it on a computer before use, and insert it into the SD card slot on the camera.

3. Charge the camera: Charging can be done by connecting the ULTRASPORT UMOVE HD 60 to a computer or a power adaptor. You can also charge it in a vehicle with a car charger (optional accessory). The camera can record video while charging if you switch to “Car Mode” in the “Menu”.

To turn the ULTRASPORT UMOVE HD 60 on or off, press and hold the “power button” for 3 to 5 seconds.

To install the battery:

1. Pull the Battery Cover Lock in the direction of the arrow to open the Battery Cover.

2. Correctly install the battery into the camera, noticing the direction of the pins.

To remove the battery:

1. Open the Battery cover.

2. Pull the tape to remove the battery.

Press the “Power/Mode” button to switch between Video Recording, Photo Shooting, Playback, and Setup. The mode symbols are displayed on the upper left corner of the screen.

• Recording mode: For shooting videos.

• Photo shooting mode: For taking still photos.

• Video playback: Refers to the function of playing back recorded videos.

• Setup: For adjusting camera settings.

1. Switch to “Recording mode” by pressing the “Power/- Mode” button until the video camera icon appears in the upper left corner of the screen.

2. Press “OK” to start recording. The icon in the upper left corner will start to flash.

3. Press “OK” again if you want to stop recording. The flashing icon will disappear.

1. Switch to “Photo shooting mode” by pressing the “Power/- Mode” button until the still camera icon appears in the upper left corner of the display screen.

2. Press “OK” to take photos.

You can adjust the following settings in the “Setup” menu for your ULTRASPORT UMOVE HD 60:

Video Settings:

• Resolution: Adjusts video quality and storage size. Options: 1080FHD / 720P 60fps / 720P 30fps / WVGA / VGA.

• Cyclic Record (Looping Video): Records a continuously looping video that overwrites itself. Options: Off / 3 Min / 5 Min / 10 Min.

• HDR (High-dynamic-range): Combines different exposures to better show bright and dark objects at the same time. Options: On / Off.

• Motion Detection: Automatically starts recording when motion is detected. Options: On / Off.

• Audio: Switch on/off for Audio Recording. Options: On / Off.

• Date Stamping: Adds a date stamp to the video. Options: On / Off.

Photo Settings:

• Capture mode: Select between different capture modes. Options: Single / 3s / 5s / 10s / 20s timer.

• Image Size: Select the desired image resolution. Options: 12M / 10M / 8M / 5M / 3M / 2MHD / VGA / 1,3M.

• Quality: Select the image quality. Options: Fine/Normal/Economy.

• Sharpness: Adjust the sharpness of your photo footage. Options: Strong/Normal/Soft.

• White Balance: Adjusts the overall color tone of photos. Options: Auto / Daylight / Cloudy / Tungsten / Fluorescent.

• Color: Adjust the color profile. Options: Color / B&W / Sepia.

• ISO: Adjusts camera sensitivity in low-light environments. Options: Auto / 100 / 200 / 400.

• Exposure: Affects the brightness of your photos. Options: +2/3 to -2.0.

• Anti-Shaking: Reduces the shaking effect. Options: On / Off.

• Quick Review: Have a quick review of the picture you just took. Options: Off / 2s / 5s.

• Date Stamping: Add a date stamp to the picture. Options: Off / Date / Date/Time.

The general settings options in the Setup Menu include:

• Language

• Date/Time

• Auto Power Off

• Beep Sound

• TV Mode

• Screensavers

• Frequency

• Rotate

• Car Mode

• OSD Mode

• Delete

• Format

• Default Setting

In “Car mode” on your ULTRASPORT UMOVE HD 60 (with the car charger connected), recording will start or stop automatically when the car starts or stops. Please note that the battery will not be charged in “Car Mode”.

On the ULTRASPORT UMOVE HD 60 screen:

1. Switch to “Playback mode” by pressing the “Power/- Mode” button until the playback icon appears in the upper left corner of the display screen.

2. Press “Up” and “Down” to select the photo or video you want to view.

3. Press “OK” to play and pause.

On a TV:

Connect the ULTRASPORT UMOVE HD 60 to your TV via an HDMI/micro HDMI cable.

There are two methods to transfer files:

1. Via USB Cable: Connect the camera to your computer using the USB cable. Then go to “Mass Storage” mode on the camera. You can then transfer the files to your PC.

2. Via Card Reader: Take out the micro SD card from the camera and transfer files to your PC through a card reader.

Yes, you can use the ULTRASPORT UMOVE HD 60 as a PC Camera. Connect the device to your computer using the USB cable, then select “PC Camera” mode on the device.