Free English UFESA SC TRIP&DRY (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD UFESA SC TRIP&DRY (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the parts and controls of the UFESA SC TRIP&DRY?
The UFESA SC TRIP&DRY consists of the following components:
A- Concentrator
B- Diffuser
C- Air filter
D- Cold air button
E- Temperature/speed control button
F- Hanger
G- Voltage selection button
How do I operate the UFESA SC TRIP&DRY?
Turn on the device through the speed control button (E) and choose the desired temperature with the same button.
How do I use the cold air function on the UFESA SC TRIP&DRY?
Press the cold air button (D) in order to set your hair style and achieve a perfect finish.
How do I change the voltage settings on the UFESA SC TRIP&DRY?
This appliance supports dual voltage (110-120V and 220-240V). To change the voltage, turn the voltage selection button (G) to the desired position. Confirm the voltage of your region before use.
How do I clean the air filter on the UFESA SC TRIP&DRY?
The air filter (C) can be cleaned by pressing the index finger and thumb in an anticlockwise direction and pulling outwards, thus prolonging the life of your hair dryer.
How do I attach and use the accessories with the UFESA SC TRIP&DRY?
For the Special Diffuser (B) for curly hair, apply slight pressure to attach the same.
For the Concentrator (A) to ensure perfect straightening, attach it by pressing lightly against the air outlet of the dryer. The air concentrator will fit snugly over the dryer nozzle. To remove it, repeat the process in reverse.
How do I turn off the UFESA SC TRIP&DRY?
To turn off the device, leave the temperature/speed control button (E) in the 0 position prior to unplugging it from the mains.
How should I clean and maintain the UFESA SC TRIP&DRY?
Ensure that the device is unplugged prior to cleaning. This device may only be cleaned with a damp cloth, and chemical products must never be used for the same.
Unplug the product when you do not intend to use it for an extended period of time to prolong its shelf-life. Allow the device to cool down prior to storage.
Can I use the UFESA SC TRIP&DRY near water?
No. Do not use this device near to bathtubs, showers, sinks or other tanks that contain water. When using a hair dryer in the bathroom, unplug after use since the proximity of water presents a risk even when the dryer is turned off.
What are the safety instructions regarding the power cord for the UFESA SC TRIP&DRY?
If the cord is damaged, it must be replaced by the manufacturer, its after-sales service or by qualified persons to prevent any hazards. Do not pull on the connection cord in order to unplug it. The mains connection cable must not be tangled or wrapped around the product during use.
CLICK HERE TO DOWNLOAD UFESA SC TRIP&DRY (01) PDF DOCUMENT