Free English TURTLE AIR-2 BASIC KIT (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD TURTLE AIR-2 BASIC KIT (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the intended purpose of the TURTLE AIR-2 BASIC KIT?
The TURTLE AIR-2 BASIC KIT is used for carrying cargo and goods on the vehicle’s roof when the vehicle’s trunk space is not sufficient.
What should be done first when installing the TURTLE AIR-2 BASIC KIT?
For the first time installation of the TURTLE AIR-2 BASIC KIT, you should remove all parts from inside the package and check them all.
What action is required if a part of the TURTLE AIR-2 BASIC KIT is missing or damaged?
If any part of the TURTLE AIR-2 BASIC KIT is missing or damaged upon opening the package, you must contact your dealer.
What equipment should be used for the installation of the TURTLE AIR-2 BASIC KIT?
You must use the equipment specified for the installation of the TURTLE AIR-2 BASIC KIT.
How do I attach the gasket for the TURTLE AIR-2 BASIC KIT?
Attach the gasket that comes out of the box to the rear chin of the TURTLE AIR-2 BASIC KIT as shown in the assembly figures.
Where are the lockable feet inserted in the TURTLE AIR-2 BASIC KIT?
In step 2 of the TURTLE AIR-2 BASIC KIT assembly, insert the lockable feet into each end of the aluminium bar.
How can I tell if the foot is fully inserted into the TURTLE AIR-2 BASIC KIT aluminium bar?
Ensure the foot is fully inserted into the TURTLE AIR-2 BASIC KIT aluminium bar until you hear a click sound.
How is the bar length adjusted for the TURTLE AIR-2 BASIC KIT?
Adjust the length of the assembled bar of the TURTLE AIR-2 BASIC KIT to suit the dimension required for your vehicle.
Do the front and rear bars of the TURTLE AIR-2 BASIC KIT have the same dimensions?
The dimension requirements for the TURTLE AIR-2 BASIC KIT may be different for the front and the rear of the vehicle.
How do you secure the TURTLE AIR-2 BASIC KIT bars to the roof rails?
Place the TURTLE AIR-2 BASIC KIT bars in the desired location and use an Allen key to tighten the clamp to the roof rails.
What is the maximum torque for tightening the TURTLE AIR-2 BASIC KIT clamp?
The maximum torque for the clamp on the TURTLE AIR-2 BASIC KIT is 5NM.
What is the purpose of the lateral adjustment screw on the TURTLE AIR-2 BASIC KIT?
The lateral adjustment screw is used to lock the bars of the TURTLE AIR-2 BASIC KIT and ensure there is no movement across the width of the vehicle.
What tool is used to tighten the lateral adjustment screw of the TURTLE AIR-2 BASIC KIT?
An Allen key is used to tighten the lateral adjustment screw on the TURTLE AIR-2 BASIC KIT.
What is the maximum torque for the TURTLE AIR-2 BASIC KIT lateral adjustment screw?
The maximum torque for the lateral adjustment screw on the TURTLE AIR-2 BASIC KIT is 5NM.
When should the endcaps be applied to the TURTLE AIR-2 BASIC KIT?
Slide the endcaps onto the TURTLE AIR-2 BASIC KIT bars only when you are satisfied with the installation and are happy that everything is secure.
How are the endcaps of the TURTLE AIR-2 BASIC KIT finalized?
Once slid into place, lock the endcaps of the TURTLE AIR-2 BASIC KIT using the provided key.
What is the maximum load capacity for the TURTLE AIR-2 BASIC KIT?
The maximum load capacity for the TURTLE AIR-2 BASIC KIT is 75 kg.
What should I do if my vehicle’s user manual specifies a different roof carrying capacity than the TURTLE AIR-2 BASIC KIT?
If the roof carrying capacity is specified in your vehicle’s user manual, you must consider that information when using the TURTLE AIR-2 BASIC KIT.
Which bar length of the TURTLE AIR-2 BASIC KIT is used for the front of the vehicle?
The long bar of the TURTLE AIR-2 BASIC KIT is designated for the front of the vehicle.
Which bar length of the TURTLE AIR-2 BASIC KIT is used for the rear of the vehicle?
The short bar of the TURTLE AIR-2 BASIC KIT is designated for the rear of the vehicle.
What are the speed limit recommendations for the TURTLE AIR-2 BASIC KIT?
The speed limits for the TURTLE AIR-2 BASIC KIT depend on whether the vehicle is loaded:
| Condition | Speed in Km/h | Speed in Mph |
|---|---|---|
| With Load | 80 Km/h | 50 Mph |
| Without Load | 130 Km/h | 80 Mph |
What is the summary of bar orientation for the TURTLE AIR-2 BASIC KIT?
| Vehicle Position | Bar Type |
|---|---|
| Front | Long Bar |
| Rear | Short Bar |
What are the torque specifications for the TURTLE AIR-2 BASIC KIT?
| Component | Maximum Torque |
|---|---|
| Clamp (Step 4) | 5NM |
| Lateral Adjustment Screw (Step 5) | 5NM |
What product codes are associated with the TURTLE AIR-2 BASIC KIT?
The TURTLE AIR-2 BASIC KIT corresponds to product codes MC02001-xxxxS/B and MC02010-xxxxS/B.
What is the specific assembly instruction for Step 4 of the TURTLE AIR-2 BASIC KIT?
In step 4, place the bars of the TURTLE AIR-2 BASIC KIT in the desired location and tighten the clamp with an Allen key. It is important to ensure each foot is mounted correctly on the roof rail.
What is the specific assembly instruction for Step 5 of the TURTLE AIR-2 BASIC KIT?
In step 5, use an Allen key to tighten the lateral adjustment screw to lock the TURTLE AIR-2 BASIC KIT bars, ensuring there is no movement across the width of the vehicle.
Does the TURTLE AIR-2 BASIC KIT require checking the vehicle user manual?
Yes, if the roof carrying capacity is specified in the manual for your vehicle, you must consider that information alongside the specifications for the TURTLE AIR-2 BASIC KIT.
What safety certification does the TURTLE AIR-2 BASIC KIT hold?
The TURTLE AIR-2 BASIC KIT is TÜV Rheinland Certified for safety and regular production surveillance.
Can the TURTLE AIR-2 BASIC KIT be used if the vehicle trunk is large enough?
The purpose of the TURTLE AIR-2 BASIC KIT is specifically for when the vehicle’s trunk is not sufficient for carrying cargo and goods.
How do I verify the parts of the TURTLE AIR-2 BASIC KIT before installation?
Remove all parts from the package and check them against the requirements for the TURTLE AIR-2 BASIC KIT before starting the first time installation.
What kind of bar material is used in the TURTLE AIR-2 BASIC KIT?
The TURTLE AIR-2 BASIC KIT utilizes aluminium bars.
What should be checked regarding movement during Step 5 of the TURTLE AIR-2 BASIC KIT installation?
You must ensure there is no movement across the width of the vehicle once the lateral adjustment screw of the TURTLE AIR-2 BASIC KIT is tightened.
How many feet are inserted into the TURTLE AIR-2 BASIC KIT bar?
One lockable foot is inserted into each end of the aluminium bar for the TURTLE AIR-2 BASIC KIT.
Is a tool required to lock the endcaps of the TURTLE AIR-2 BASIC KIT?
Yes, the endcaps of the TURTLE AIR-2 BASIC KIT are locked in place using a key.
What is the importance of Step 4 in the TURTLE AIR-2 BASIC KIT setup?
Step 4 is important to ensure each foot of the TURTLE AIR-2 BASIC KIT is mounted correctly on the roof rail of the vehicle.
Can the TURTLE AIR-2 BASIC KIT be used at speeds over 80 Km/h with a load?
The recommended speed limit for the TURTLE AIR-2 BASIC KIT with a load is 80 Km/h (50 Mph).
What is the maximum speed allowed for the TURTLE AIR-2 BASIC KIT when no load is attached?
When the TURTLE AIR-2 BASIC KIT is installed without a load, the maximum speed allowed is 130 Km/h (80 Mph).
Where can I find the correct equipment specifications for the TURTLE AIR-2 BASIC KIT?
The equipment specified for installation is outlined in the instructions for the TURTLE AIR-2 BASIC KIT.
How do I adjust the TURTLE AIR-2 BASIC KIT for different vehicle dimensions?
In step 3, you adjust the length of the assembled bar to suit the specific dimension required by your vehicle for the TURTLE AIR-2 BASIC KIT.
What component of the TURTLE AIR-2 BASIC KIT must be mounted to the roof rails?
The clamps of the TURTLE AIR-2 BASIC KIT are tightened using an Allen key to secure the bar to the roof rails.
Is the gasket included in the TURTLE AIR-2 BASIC KIT package?
Yes, the gasket comes out of the box with the TURTLE AIR-2 BASIC KIT.
What ensures the TURTLE AIR-2 BASIC KIT bars do not move across the width of the vehicle?
Tightening the lateral adjustment screw to the maximum torque of 5NM ensures the TURTLE AIR-2 BASIC KIT bars are locked in place.
What sound should I listen for when installing the feet of the TURTLE AIR-2 BASIC KIT?
You should hear a click sound to confirm the feet are fully inserted into the TURTLE AIR-2 BASIC KIT bar.
Can I use an Allen key for both the clamp and lateral adjustment on the TURTLE AIR-2 BASIC KIT?
Yes, an Allen key is used for both tightening the clamp in Step 4 and the lateral adjustment screw in Step 5 of the TURTLE AIR-2 BASIC KIT assembly.
What defines a successful installation for the TURTLE AIR-2 BASIC KIT?
A successful installation is when the user is satisfied that all components are secure and there is no movement, allowing for the endcaps of the TURTLE AIR-2 BASIC KIT to be slid on and locked.
Is the 75 kg load limit for the TURTLE AIR-2 BASIC KIT always applicable?
While the TURTLE AIR-2 BASIC KIT has a 75 kg limit, you must always defer to the roof carrying capacity specified in your vehicle’s user manual if it is different.
How are the endcaps of the TURTLE AIR-2 BASIC KIT secured?
The endcaps of the TURTLE AIR-2 BASIC KIT are slid onto the bars and then locked into place.
What items can be transported with the TURTLE AIR-2 BASIC KIT?
The TURTLE AIR-2 BASIC KIT is designed for carrying cargo and goods.
What should I check before sliding on the endcaps for the TURTLE AIR-2 BASIC KIT?
Before sliding on the endcaps, you must be satisfied with the installation and happy that all parts of the TURTLE AIR-2 BASIC KIT are secure.
Where is the gasket placed on the TURTLE AIR-2 BASIC KIT?
The gasket is attached to the rear chin of the TURTLE AIR-2 BASIC KIT assembly.
Are the bars for the TURTLE AIR-2 BASIC KIT adjustable?
Yes, the length of the assembled bars for the TURTLE AIR-2 BASIC KIT can be adjusted to suit dimension requirements.
CLICK HERE TO DOWNLOAD TURTLE AIR-2 BASIC KIT (01) PDF DOCUMENT