Free English TREKZ TITANIUM AS600 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD TREKZ TITANIUM AS600 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I perform the initial setup for the TREKZ TITANIUM AS600?
To set up your TREKZ TITANIUM AS600, follow these three steps:
1. Charge: Charge the headphones with the included micro-USB charging cable. The LED indicator will turn blue when charging is complete.
2. Pair: Press and hold the power button for 5 seconds to enter pairing mode. The LED indicator will flash blue and red repeatedly while in discovery.
3. Connect: Enable the Bluetooth settings on your device and select TREKZ TITANIUM AS600. The LED indicator will turn blue once connected.
What are the functions and actions for the Multifunction Button on the TREKZ TITANIUM AS600?
The Multifunction Button on the TREKZ TITANIUM AS600 performs the following operations:
| Function | Action | Prompt/Audrey Says |
|---|---|---|
| Play/pause music | Click once | One beep |
| Skip to next song | Double-click while music is playing | One beep |
| Answer/end call | Click once | One beep |
| Answer call waiting and put the current caller on hold | Click once to switch between callers | One beep |
| Answer call waiting and hang up on current caller | Press and hold for 2 seconds | One beep |
| Reject a call | Press and hold for 2 seconds | Two beeps |
| Voice dial | Press and hold for 2 seconds | Voice dial |
| Redial last number | Double-click | Last number redial |
How do I use the Volume and Power buttons on the TREKZ TITANIUM AS600?
The Volume Up/Power Button and Volume Down Button on the TREKZ TITANIUM AS600 provide the following controls:
| Function | Action | Prompt/Audrey Says |
|---|---|---|
| Power on/off | Press and hold the power button for 2 seconds | Four beeps and Welcome to Trekz Titanium |
| Mute | Press and hold both buttons for 2 seconds while on a call | Mute on or Mute off |
| Change EQ setting | Press and hold both buttons for 2 seconds while music is playing | Equalization changed |
| Check battery status | Click the volume up or down button while music is paused | Battery high, medium, low (or) charge me |
| Adjust volume | Click the volume up or down button to adjust volume | One beep |
What do the different LED indicator colors mean on the TREKZ TITANIUM AS600?
The LED indicator on the TREKZ TITANIUM AS600 uses the following signals to show device status:
| LED Appearance | Status |
|---|---|
| Solid red | Charging |
| Solid blue | Charging complete |
| Flashes red and blue | Pairing mode |
| Flashes blue | Incoming call |
| Flashes red every 2 minutes | Low battery |
What are the technical specifications for the TREKZ TITANIUM AS600?
The TREKZ TITANIUM AS600 features the following technical specifications:
| Part number | AS600 |
| Speaker type | Bone conduction transducer |
| Frequency response | 20Hz-20KHz |
| Sensitivity | 100 +/- 3dB |
| Microphone | -40dB +/- 3dB |
| Bluetooth version | Bluetooth v4.1 |
| Compatible profiles | A2DP, AVRCP, HSP, HFP |
| Wireless range | 33 ft (10m) |
| Battery | Rechargeable lithium ion |
| Continuous play | 6 hours |
| Standby time | 10 days |
| Charge time | 1.5 hours |
| Weight | 1.27 oz (36g) |
How do I enable multipoint pairing on the TREKZ TITANIUM AS600?
Multipoint pairing allows the TREKZ TITANIUM AS600 to be connected to two devices at once. Follow these steps:
1. Enter pairing mode on your headphones.
2. Press and hold the multifunction button and the volume up/power button simultaneously for 2 seconds. Audrey will say Multipoint enabled.
3. Pair your first device. Audrey will say Connected.
4. Shut down the headphones.
5. Re-enter pairing mode.
6. Pair your second device. Audrey will say Second device connected.
7. Turn the headphones off, then power them back on.
How do I reset the TREKZ TITANIUM AS600 headphones?
To reset your TREKZ TITANIUM AS600, first enter pairing mode. Once in pairing mode, press and hold the multifunction button and both volume buttons (up and down) simultaneously for 3 seconds.
How do I use the optional FitBand accessory with the TREKZ TITANIUM AS600?
Silicon rubber FitBands provide adjustability for smaller head sizes on the TREKZ TITANIUM AS600:
1. Slide the FitBand (R) over the right transducer and along the right arm so it rests over the charging port.
2. Slide the FitBand (L) over the left transducer and along the left arm, aligning it evenly with the right arm.
3. Rotate the FitBands around the arms until you achieve the desired fit.
How should I use earplugs with the TREKZ TITANIUM AS600?
Earplugs can be used with the TREKZ TITANIUM AS600 in environments where it is safe to block ambient noise:
1. Roll the earplugs firmly between your fingers and place them in your ears.
2. To adjust the EQ settings for reduced or enhanced bass while wearing earplugs, press and hold the volume up and down buttons simultaneously.
What are the storage and maintenance guidelines for the TREKZ TITANIUM AS600?
To maintain your TREKZ TITANIUM AS600, please follow these instructions:
– Store the headphones in a cool and dry place. The working temperature should be 0-45 degrees Celsius (32-113 degrees Fahrenheit). Working in very cold, hot, or highly humid areas may reduce battery life.
– If the headphones have been stored for an extended period, charge the unit before using it again.
– The headphones are sweat resistant but are NOT waterproof. Do not submerge the headphones in water.
– Listening at high volumes for long periods may affect your hearing and distort the audio.
– Clean the headphones using only a soft dry cloth.
– Do not charge the headphones immediately after exercising, as any moisture or sweat inside the charging port could lead to circuit burning.
CLICK HERE TO DOWNLOAD TREKZ TITANIUM AS600 (01) PDF DOCUMENT