Free English AFTERSHOKZ TITANIUM AS600 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD AFTERSHOKZ TITANIUM AS600 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I set up my AFTERSHOKZ TITANIUM AS600?
Charge the AFTERSHOKZ TITANIUM AS600 using the supplied micro-USB charging cable. The LED indicator will turn blue when charging is complete.
How do I pair my AFTERSHOKZ TITANIUM AS600?
1. Start with your AFTERSHOKZ TITANIUM AS600 turned off.
2. Enter pairing mode by pressing and holding the volume+ button for 5 seconds until the LED indicator flashes red and blue and Audrey Says™ “pairing.”
3. Open your device’s Bluetooth settings and select “AFTERSHOKZ TITANIUM AS600 by AfterShokz.” Audrey will say “connected” and the LED indicator will flash blue once.
What are the controls for the AFTERSHOKZ TITANIUM AS600?
The controls for the AFTERSHOKZ TITANIUM AS600 are as follows:
| Function | Action | Audrey Says™ | LED Indicator |
|---|---|---|---|
| Power On | Press and hold volume+ button for 2 seconds | “Welcome to AfterShokz” | Blue flash |
| Power Off | Press and hold volume+ button for 3 seconds | “Power off” | Red flash |
| Mute (during call) | Press and hold volume+ and volume- button for 2 seconds | “Mute on” or “Mute off” | Red flash |
| Play/Pause | Press multifunction button once | ||
| Next Song | Press multifunction button twice | ||
| Previous Song | Press multifunction button thrice | ||
| Answer Call | Press multifunction button once | ||
| End Call | Press multifunction button once | ||
| Reject Call | Press multifunction button for 2 seconds | ||
| Volume Up | Press volume+ button once | Beep | |
| Volume Down | Press volume- button once | Beep | |
| Check Battery Status | Press volume+ or volume- button while music is paused | “Battery high,” “Battery medium,” “Battery low,” or “Charge me” |
What are the specifications of the AFTERSHOKZ TITANIUM AS600?
The specifications for the AFTERSHOKZ TITANIUM AS600 are:
| Specifications | AFTERSHOKZ TITANIUM AS600 |
|---|---|
| Speaker type | Bone conduction transducers |
| Frequency response | 20Hz~20KHz |
| Sensitivity | 100 ± 3dB |
| Microphone | -40dB ± 3dB |
| Bluetooth® version | Bluetooth® V4.1 |
| Compatible profiles | A2DP, AVRCP, HSP, HFP |
| Wireless range | 33 ft (10m) |
| Battery | Rechargeable lithium ion battery |
| Continuous play | 6 hours |
| Standby time | 10 days |
| Charge time | 1.5 hours |
| Weight | 1.27 oz (36g) |
What does the LED indicator on my AFTERSHOKZ TITANIUM AS600 mean?
The LED indicator on the AFTERSHOKZ TITANIUM AS600 indicates the following:
| LED Indicator | Status |
|---|---|
| Solid red | Charging |
| Solid blue | Charging complete |
| Red and blue flashes | Pairing mode |
| Blue flash once | Paired |
| Blue flash every 5 seconds | AFTERSHOKZ TITANIUM AS600 connected/talking |
| Red flash | Low battery |
How do I reset my AFTERSHOKZ TITANIUM AS600?
1. Start with your AFTERSHOKZ TITANIUM AS600 turned off.
2. Enter pairing mode by pressing and holding the volume+ button for 5 seconds until the LED indicator flashes red and blue and Audrey Says™ “pairing.”
3. Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3 seconds. Audrey Says™ “duet” and the LED indicator flashes red and blue once.
4. Turn your AFTERSHOKZ TITANIUM AS600 off.
Your AFTERSHOKZ TITANIUM AS600 is now reset and can be re-paired to your device.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD AFTERSHOKZ TITANIUM AS600 (01) PDF DOCUMENT