Free English TP-LINK KS225 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD TP-LINK KS225 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What types of bulbs are compatible with the TP-LINK KS225?
The TP-LINK KS225 is compatible with incandescent, LED, Halogen, and compact fluorescent light bulbs.
How do I decrease the lighting brightness on the TP-LINK KS225?
Press the button with the downward arrow icon on the TP-LINK KS225 to decrease the lighting brightness.
How do I increase the lighting brightness on the TP-LINK KS225?
Press the button with the upward arrow icon on the TP-LINK KS225 to increase the lighting brightness.
What does a solid amber light indicate on the TP-LINK KS225?
A solid amber light on the TP-LINK KS225 means it is starting up.
What does a blinking amber and green light mean on the TP-LINK KS225?
A blinking amber and green light on the TP-LINK KS225 indicates the device is ready for setup or is resetting its Wi-Fi settings.
What does a blinking green light signify on the TP-LINK KS225?
A blinking green light on the TP-LINK KS225 means it is currently connecting to Wi-Fi.
What does a solid green light indicate on the TP-LINK KS225?
A solid green light on the TP-LINK KS225 means it is connected to the Wi-Fi network. This light will stay lit for about 30 seconds and then turn off.
What does a blinking amber light indicate on the TP-LINK KS225?
A blinking amber light on the TP-LINK KS225 means the device is resetting.
What does a red light indicate on the TP-LINK KS225?
A red light on the TP-LINK KS225 indicates there is no Wi-Fi connection.
What does a white light signify on the TP-LINK KS225?
A white light on the TP-LINK KS225 will light up when the light is switched OFF, helping to show the location of the dimmer in the dark.
How do I reboot the TP-LINK KS225?
Press the RESTART button on the TP-LINK KS225 to reboot it.
How do I reset the Wi-Fi of the TP-LINK KS225 while keeping other settings?
Press and hold the RESET button on the TP-LINK KS225 for about 5 seconds until the Wi-Fi status LED blinks amber and green.
How do I factory reset the TP-LINK KS225?
Press and hold the RESET button on the TP-LINK KS225 for about 10 seconds until the Wi-Fi status LED blinks amber rapidly.
What tools are needed to wire the TP-LINK KS225?
You need a philips screwdriver, a slotted screwdriver, pliers, wire strippers, and a voltage detector to wire the TP-LINK KS225.
How do I identify the line and load wires for the TP-LINK KS225?
To identify the wires for the TP-LINK KS225: First, turn on the circuit breaker. Use a voltage detector to find the energized wire, which is the Line wire. Then, turn off the circuit breaker and label the Line and Load wires accordingly.
What is the safety procedure before removing the wallplate to install the TP-LINK KS225?
Always turn off the circuit breaker before removing the old wallplate to install the TP-LINK KS225 to avoid the risk of electric shock.
How do I label the ground and neutral wires for the TP-LINK KS225?
Apply the Neutral label to one of the bundle of white wires found at the back of the box and apply the Ground label to the Ground wire when installing the TP-LINK KS225.
What is the final step after wiring the TP-LINK KS225?
After folding the wires back into the wall box and securing the TP-LINK KS225 with screws, attach the wallplate and turn on the circuit breaker.
How do I set up the TP-LINK KS225 using the Kasa Smart app?
Download the Kasa Smart app, log in with your TP-Link ID, tap the add device button, select Smart Switches, then select Matter Smart Switch and follow the in-app instructions to configure your TP-LINK KS225.
What is required before setting up the TP-LINK KS225 via Matter?
You need a Matter Controller, a fresh device, a phone connected to the same 2.4 GHz Wi-Fi network as the controller, and the Matter Setup Code for the TP-LINK KS225.
How do I access the Matter setup mode on the TP-LINK KS225?
The setup mode for the TP-LINK KS225 is active for 15 minutes after powering up. If it times out, turn the device off and back on to re-enter setup mode.
How can I set up the TP-LINK KS225 in multiple Matter apps?
The original Matter code for the TP-LINK KS225 can only be used for setup in one app. To set it up in multiple apps, generate a new code using the first app for all subsequent additions.
What should I do if the TP-LINK KS225 fails to set up?
Update your firmware, restart your devices, check if IPv6 is active on your router, ensure you are in setup mode, do not close the code-generating page prematurely, or factory reset the TP-LINK KS225 if necessary.
What is the operating temperature range for the TP-LINK KS225?
The operating temperature range for the TP-LINK KS225 is 32 to 104 degrees Fahrenheit (0 to 40 degrees Celsius).
What are the electrical requirements for the TP-LINK KS225?
The TP-LINK KS225 is rated for 120V at 60Hz.
What are the supported load limits for the TP-LINK KS225?
The TP-LINK KS225 supports up to 300W for Incandescent or Halogen bulbs and up to 150W for LED bulbs.
What are the required dimensions for the outlet box when installing the TP-LINK KS225?
The outlet box used for the TP-LINK KS225 must have dimensions larger than 2.95 inches (75 mm) in height, 1.81 inches (46 mm) in width, and 2 inches (51 mm) in depth.
How tightly should I secure the terminal screws on the TP-LINK KS225?
Tighten the terminal screws on the TP-LINK KS225 to 13 lbf-in.
Can I install the TP-LINK KS225 with wet hands?
No, do not install the TP-LINK KS225 with wet hands or when standing on wet or damp surfaces.
What does the symbol of a square inside a square mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 indicates Class II equipment.
What does the symbol of a square inside a square with an earth line mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 indicates Class II equipment with functional earthing.
What does the wavy line symbol represent on the TP-LINK KS225?
The wavy line symbol on the TP-LINK KS225 represents Alternating current.
What does the horizontal bar symbol mean on the TP-LINK KS225?
The horizontal bar symbol on the TP-LINK KS225 represents DC voltage.
What does the house symbol signify on the TP-LINK KS225?
The house symbol on the TP-LINK KS225 signifies that the device is for indoor use only.
What does the lightning bolt symbol represent on the TP-LINK KS225?
The lightning bolt symbol on the TP-LINK KS225 represents Dangerous voltage.
What does the triangle with an exclamation point symbol mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 indicates Caution, risk of electric shock.
What does the roman numeral VI in a circle mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 indicates the Energy efficiency Marking.
What does the earth symbol with a circle around it signify on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents Protective earth.
What does the standard ground symbol mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents Earth.
What does the frame symbol mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents Frame or chassis.
What does the functional earthing symbol mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents Functional earthing.
What does the triangle with three wavy lines represent on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents Caution, hot surface.
What does the open book symbol mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents Operator’s manual.
What does the power symbol within a circle mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents Stand-by.
What does the push-push circle symbol represent on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents ON/OFF (push-push).
What does the rectangle symbol with a line through it represent on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents Fuse.
What does the recycle symbol on the TP-LINK KS225 signify?
That symbol on the TP-LINK KS225 indicates that the product must be handled pursuant to the WEEE directive for recycling or dismantling to minimize environmental impact.
What does the symbol of an ear with sound waves inside a triangle mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 represents Caution, avoid listening at high volume levels for long periods.
What does the disconnection symbol on the TP-LINK KS225 represent?
That symbol on the TP-LINK KS225 represents Disconnection, all power plugs.
What does the symbol ‘m’ mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 indicates Switch of mini-gap construction.
What does the symbol ‘µ’ mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 indicates Switch of micro-gap construction (for US version) or Switch of micro-gap / micro-disconnection construction (for other versions except US).
What does the symbol ‘ε’ mean on the TP-LINK KS225?
That symbol on the TP-LINK KS225 indicates Switch without contact gap (Semiconductor switching device).
CLICK HERE TO DOWNLOAD TP-LINK KS225 (01) PDF DOCUMENT