FREE ENGLISH TOWA TM-5 (01) PDF DOCUMENT.
FREE ENGLISH TOWA TM-5 (01) PDF USER GUIDE.
FREE ENGLISH TOWA TM-5 (01) PDF USER MANUAL.
FREE ENGLISH TOWA TM-5 (01) PDF OWNER GUIDE.
FREE ENGLISH TOWA TM-5 (01) PDF OWNER MANUAL.
FREE ENGLISH TOWA TM-5 (01) PDF REFERENCE GUIDE.
FREE ENGLISH TOWA TM-5 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH TOWA TM-5 (01) PDF REFERENCE MANUAL.
FREE ENGLISH TOWA TM-5 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH TOWA TM-5 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD TOWA TM-5 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
Which bobbin cases are compatible with each model of the TOWA Bobbin Case Tension Gauge?
| Type No. | Kinds of usable bobbin cases | Description |
|---|---|---|
| TM-1 | BC-HR, BC-DB1, BC-DBZ | (HOME USE ROTARY TYPE), (INDUSTRIAL USE ROTARY TYPE) |
| TM-2 | BC-HA1, BC-HZ | (HOME USE SHUTTLE HOOK TYPE) |
| TM-3 | BC-DBM | (ALL CLASSES) |
| TM-4 | BC-PF9076 | (ALL CLASSES) |
| TM-5 | BC-269, BC-LK(B), BC-LK(J) | (IND’ USE SHUTTLE HOOK TYPE) |
How do I set the bobbin case on the tension gauge?
1. Set a threaded bobbin in the bobbin case and pull the thread out of the tension spring.
2. Put the bobbin case on the bobbin case set position of the gauge.
3. The pointed-end of the bobbin case Latch or Stopper has to meet the groove (A) or (B) of the Thread Guide.
Use Groove (A) for Latch-type bobbin cases (Models TM-1, TM-3, TM-4).
Use Groove (B) for Stopper-type bobbin cases (Models TM-2, TM-5).
How do I pull the thread to measure the tension?
After setting the bobbin case, the instructions are the same for all types.
After threading through No.1 and No.2 pulley, pull the thread lightly in the direction of the arrow. At the same time, check the graduations of the Gauge Indicator.
How do I adjust the thread tension on the bobbin case?
If the thread tension is too strong or weak, adjust the tension by turning the tension adjusting screw on the bobbin case to the right (stronger) or left (weaker).
How do I cut the excess thread?
After measuring and adjusting the thread tension, cut out the odd thread with the Thread Cutter (C), pressing the odd thread of No.2 pulley with your finger.
What are the other instructions and precautions for this device?
As this device is a precise measuring apparatus carefully tested and adjusted, please do not drop, hit it against another body or disassemble it.
There are several adjustments necessary for garment sewing. Among them, the measuring of thread tension of the under thread in the bobbin case is required before starting any sewing work when the thread or cloth or material to be sewn is changed into a different one.
Keep off this Device from thinner oil, benzine oil, alcohol, petroleum.
CLICK HERE TO DOWNLOAD TOWA TM-5 (01) PDF DOCUMENT