FREE ENGLISH TOSHIBA E-STUDIO3025AC (01) PDF USER GUIDE
FREE ENGLISH TOSHIBA E-STUDIO3025AC (01) PDF USER MANUAL
FREE ENGLISH TOSHIBA E-STUDIO3025AC (01) PDF OWNER GUIDE
FREE ENGLISH TOSHIBA E-STUDIO3025AC (01) PDF OWNER MANUAL
FREE ENGLISH TOSHIBA E-STUDIO3025AC (01) PDF REFERENCE GUIDE
FREE ENGLISH TOSHIBA E-STUDIO3025AC (01) PDF INSTRUCTION GUIDE
FREE ENGLISH TOSHIBA E-STUDIO3025AC (01) PDF REFERENCE MANUAL
FREE ENGLISH TOSHIBA E-STUDIO3025AC (01) PDF INSTRUCTION MANUAL
FREE ENGLISH TOSHIBA E-STUDIO3025AC (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD TOSHIBA E-STUDIO3025AC (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I stop and restart copying?
Press [Stop] on the touch panel.
Copying or scanning stops.
Press [Job Cancel] on the touch panel to stop copying.
Press [Next Copy] on the touch panel or the [START] button on the control panel to restart.
How do I scan the next original during copying (auto job start)?
Set the number of copy sets and the copy modes as required.
Press the [START] button on the control panel.
How do I confirm auto jobs?
You can confirm which jobs are in waiting on the touch panel or cancel them as required.
How do I cancel jobs being scanned?
Press [Stop] on the touch panel to stop a job while originals are being scanned.
When you press [Job Cancel] on the touch panel or the [FUNCTION CLEAR] button on the control panel while the scanning is being paused, the scanning will end. (In this case, the data which were scanned before the job was paused will be copied.) To restart the scanning, press the [START] button.
How do I scan the next original during copying (priority job)?
Press [Interrupt Priority] and select [Priority].
Set the number of copy sets and the copy settings as required.
Press the [START] button.
How do I interrupt copying and make other copies (interrupt copying)?
Press [Interrupt Priority] and select [Interrupt].
Select other copy modes as required.
Press the [START] button.
How do I make one copy as a sample (proof copy)?
Select the number of copy sets and copy modes.
Press [Proof Copy] on the touch panel.
Press the [START] button on the control panel.
Change the number of copy sets and copy modes as required after checking the proof copy.
Press the [START] button on the control panel.
How do I specify the orientation of originals?
Press a paper direction button on the Basic menu, matching the orientation of the placed original.
How do I enable Automatic Paper Selection (APS)?
Press [APS] on the touch panel.
Select other copy modes as required, and then press the [START] button on the control panel.
How do I select the drawer for my desired paper manually?
Press the drawer button corresponding to the desired paper size.
Select other copy modes as required, and then press the [START] button on the control panel.
How do I copy mixed-size originals in one operation?
Press [Zoom] on the Basic menu.
Press [Mixed Size].
Select a paper size.
Select other copy modes as required, and then press the [START] button on the control panel.
How do I bypass copy on standard size paper?
Place paper on the bypass tray.
Select the same size button under “Copy” as that of the paper you placed on the bypass tray.
Press [Paper Type] on the touch panel if the paper type of the paper you placed on the bypass tray is other than plain paper.
After setting the paper size and type, press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
How do I copy on other than the above standard sizes of paper?
Place the original(s) and paper on the bypass tray.
Press [Size Setting] on the touch panel.
Press the button of the same size as the paper you placed on the bypass tray.
Press [Other] under “Copy”.
Press [Paper Type] if the paper you placed on the bypass tray is other than plain paper.
After setting the paper size and paper type, press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
How do I copy on an envelope?
Place the original on the original glass.
Place paper on the bypass tray.
Press [Size Setting] on the touch panel.
Press the button of the same size as the envelope you placed on the bypass tray.
Press [Other] under “Copy” and press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
How do I bypass copy on non-standard size paper?
Place the original.
Place paper on the bypass tray.
Press [Custom Paper] on the touch panel.
Key in the dimension, and press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
How do I change the exit tray?
To change the exit tray, press [Exit Tray].
How do I switch Color Modes (Color Model only)?
Press any of [Full Color], [Black] or [Auto Color] on the touch panel.
How do I adjust density automatically (automatic density adjustment)?
Press [Auto] on the touch panel.
How do I adjust density manually?
Press either or to select the desired density level.
How do I use Automatic Magnification Selection (AMS)?
Press [Zoom] on the Basic menu.
Select the desired paper size, press [AMS] and then [OK].
How do I specify both the original size and the copy paper size separately?
Press [Zoom] on the Basic menu.
Select the desired sizes for the original and copy paper, and then press [OK].
How do I register paper sizes to “Other” size?
Press [Size Setting] on the touch panel.
Select the desired size.
How do I register non-standard size in the memory?
Follow the same procedure noted in steps 1 to 3 in the reference below: P.37 “Bypass copying on non-standard size paper”
Register dimensions.
How do I specify reproduction ratio manually?
Press [Zoom] on the Basic menu.
Press the buttons below to select the desired reproduction ratio.
Select the desired size, and then press [OK].
How do I copying photo originals in the optimal reproduction ratio for copy paper size (Photo Zoom) (Color Model only)?
Press [Zoom] on the Basic menu.
Press [Photo Zoom].
Select the original size.
Select the desired copy paper size, and then press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
Place the next original, and then press [Next Copy] on the touch panel or the [START] button on the control panel.
When the scanning of all the originals is finished, press [Job Finish] on the touch panel.
How do I set photo originals in other sizes?
Press [Custom] on the touch panel.
Key in the size of the original, and press [OK].
How do I reducing images to scan the entire original, including the edges (Full Image) (Color Model only)?
Press [Zoom] on the Basic menu.
Select sizes for the original and copy paper, and press [OK].
Press [Full Image] on the Edit menu.
How do I make a copy with a scanned image reduced and moved to the center of the paper (Centering Copy)?
Press [Zoom] on the Basic menu.
Select a desired reproduction ratio.
Press [Centering Copy].
Press [OK] on the displayed centering copy screen.
Press [OK] on the [Zoom] screen.
How do I select Finishing modes and optional finishing devices?
The following table describes the finishing modes and optional finishing devices:
| Finishing mode | Description |
|---|---|
| Non-sort Non-staple | Copies exit without being sorted or stapled. |
| Sort | Copies exit in the offset mode (shift exiting) in the same page order as the originals one set after another. |
| Group | Copies grouped by page exit in the offset mode (shift exiting). |
| Rotate sort | Copies exit in the offset mode (shift exiting) set by set alternately in a different direction. |
| Staple sort | Copies exit with their corner stapled. |
| Magazine sort | Copies exit in a book-type page order. |
| Center fold | Copies exit in a book-type page order with their center folded. |
| Saddle stitch | Copies exit in a book-type page order with their center folded and stapled. |
| Magazine sort & center fold | Magazine sort and center fold are used together. |
| Magazine sort & saddle stitch | Magazine sort and saddle stitch are used together. |
| Hole punch | Copies exit with their side punched. |
| Manual staple | Copies are stapled manually. |
How do I enable Sort and group mode?
Press [Finishing] on the Basic menu.
Select [Sort] or [Group], and then press [OK].
Key in the desired number of copies on the Basic menu.
How do I enable Rotate sort mode?
Press [Finishing] on the Basic menu.
Select [Rotate Sort], and then press [OK].
Key in the desired number of copies on the Basic menu.
How do I enable Staple sort mode?
Press [Finishing] on the Basic menu.
Press the button for the staple position, select the direction that matches the original you set from “Original Direction”, and press [OK].
How do I enable Magazine sort / Center fold / Saddle stitch?
Place the original(s).
Press [Finishing] on the Basic menu.
Select the direction that matches the direction you set from “Original Direction”, and press [Binding].
Select a binding mode and press [OK].
When you select [Magazine Sort], [Magazine Sort & Center Fold], or [Magazine Sort & Saddle Stitch], specify the binding margin and press [OK].
Combine the copied paper if the center fold mode or magazine sort & center fold mode is used.
How do I enable Duplex Copying?
Press [2-Sided] on the Basic menu.
How do I make a 1-sided copy?
Press [2-Sided] on the Basic menu.
Select the desired mode and original direction, and then press [OK].
How do I make a 2-sided copy?
Press [2-Sided] on the Basic menu.
Select the desired mode, book or tablet of original and paper, and original direction, and then press [OK].
How do I make a 2-sided copy from a book-type original?
Press [2-Sided] on the Basic menu.
Select [Book -> 2].
Select the start page to be scanned and page layout.
Press [OK].
Press the drawer button corresponding to the desired paper size.
Select other copy modes as required.
Place the original on the original glass.
Press the [START] button on the control panel. Once the pages are scanned, set the next ones on the original glass.
When all the pages have been scanned, press [Finished].
How do I use the Setting Original Modes?
Press [Original Mode] on the Basic menu.
Select the original mode, and then press [OK].
How do I display the Edit Menu?
You can display the Edit menu by pressing the [Edit] tab on the touch panel when you want to use various editing functions.
How do I create top, bottom, left, and right margins?
Press [Image Shift] on the Edit menu.
Select the type of binding margin.
Adjust the width of the binding margin, and press [OK].
How do I create bookbinding margins?
Press [Image Shift] on the Edit menu.
Press [Book].
Adjust the width of the binding margin, and press [OK].
Press [OK].
How do I clear Dirty Edges of Originals (Edge Erase)?
Press [Edge Erase] on the Edit menu.
Adjust the width of the part to be erased, and press [OK].
How do I Clear Shadows in the Center of Book-type Originals (Book Center Erase)?
Select the drawer for the desired paper size.
Press [Book Center Erase] on the Edit menu.
Adjust the width of the part to be erased, and press [OK].
Place the original on the original glass.
How do I copy the Sides of Book-type Originals Separately (Dual Page)?
Press [Dual Page] on the Edit menu.
Press [1 Side] or [2 Side].
Select other copy modes as required.
Press the [Basic] tab to display the Basic menu, and then select A4, B5 or LT as the copy paper size.
Open the desired page of the original and place it on the original glass.
Press the [START] button on the control panel. When the scanning of the opened pages is finished, open the next pages and place them.
When all the pages have been scanned, press [Finished].
How do I copy Multiple Originals onto One Sheet (2 in 1 / 4 in 1)?
Press [2 in 1/4 in 1] on the Edit menu.
Perform 2 in 1 / 4 in 1 setting, and press [OK].
How do I centering a Scanned Image (Centering Copy)?
Press [Centering Copy] on the Edit menu.
Press [OK].
How do I use editing scanned images?
Press [Editing] on the Edit menu.
Select [Trim] or [Mask].
Place the original on the original glass with its face up.
Read the following 4 values to specify the area using the left and top scales on the original glass.
Key in the read values, and press [OK].
Place the original again on the original glass with its face down.
How do I use Mirror image and negative/positive reversal?
Press [Editing] on the Edit menu.
Select [Mirror] or [Neg/Pos], and then press [OK].
How do I use Applying Separate Reproduction Ratios to Vertical and Horizontal Directions (XY Zoom)?
Press [XY Zoom] on the Edit menu.
Set the reproduction ratio in both vertical and horizontal directions.
How do I use Applying Different Settings for Cover Sheets (Cover Sheet)?
Place the paper for the cover sheets and specify the paper type.
Place the normal paper in the drawer(s).
Place the original(s).
Press [Cover Sheet] on the Edit menu.
Select the front and back cover settings, and then press [OK].
Press the [Basic] tab to display the Basic menu. Then select a drawer in which normal paper is placed (not the one for the cover sheets).
Select other copy modes as required, and then press the [START] button on the control panel.
Place the next original, and then press [Next Copy] on the touch panel or the [START] button on the control panel.
How do I use Inserting a Sheet at a Desired Page (Sheet Insertion)?
Place sheets for sheet insertion and specify the paper type.
Press [Sheet Insertion] on the Edit menu.
Select either [Copied] or [Blank].
Select the page where the insertion sheets will be inserted, and press [OK].
Press the [Basic] tab to display the Basic menu. Then select the drawer in which normal paper is placed (not the one for sheet insertion).
Select other copy modes as required, and then press the [START] button on the control panel.
Place the next original, and then press [Next Copy] on the touch panel or the [START] button on the control panel.
When the scanning of all the originals is finished, press [Job Finish] on the touch panel.
How do I use Adding date and time (Time Stamp)?
Press [Annotation] > [Time Stamp] on the Edit menu.
Select the direction and position of the time stamp as well as the color of the background, and then press [OK].
How do I use Adding text stamp (Text Stamp)?
CLICK HERE TO DOWNLOAD TOSHIBA E-STUDIO3025AC (01) PDF MANUAL