TCL 65A300W (01) PDF MANUAL

TCL 65A300W (01) PDF SUMMARY:

How do I register and protect my TCL purchase?

Text a photo of the camera icon to 71403 or register online at register.tcl.com. Need help? Visit photoregister.com/help or text HELP to 71403.

---

What do I do if I have any questions about the TCL TV?

Contact TCL support first at 1-877-854-0181 or support.tcl.com.

---

What warnings should I be aware of regarding the TCL TV?

• To reduce the risk of fire or electric shock, do not expose the product to rain or moisture. This product should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the apparatus.
• The TV is unstable if it is not properly attached to the base or mounted to the wall. Follow the base or wall mounting instructions provided in the User’s Guide to ensure safety.
• The batteries should not be exposed to excessive heat, such as prolonged direct sunlight, open flame, or fire of any kind.
• To avoid the danger of suffocation, keep plastic packaging away from babies, children, and pets. Do not use packaging bags in cribs, beds, carriages, or playpens.
• To avoid any falling, before moving the TV, remove the magnetic decorative bezels first.

---

What important information should I know about the TCL TV?

• Keep the sales receipt to obtain warranty parts and service and for proof of purchase. Attach it and record the serial and model numbers. These numbers are located on the product.
• Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Keep the apparatus at least 8 inches away from the human body.
• The power button on the TV and remote control puts the TV into a very low-power standby mode but will not completely turn the power off. To completely shut the power off, disconnect the power cord from the outlet. The mains plug/appliance coupler is used to completely turn off the device.
• This television is a table model and is designed to sit on a firm, flat surface. Do not place the TV on soft carpeting or on a similar surface as this may cause the ventilation slots located on the bottom of the unit to be blocked and may result in reduced product lifespan from overheating.
• To assure adequate ventilation for this product, maintain a spacing of one (1) inch from the top and side of the TV receiver and two (2) inches from the rear of the TV receiver and other surfaces.
• Make sure the TV stand or base is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off, which may cause personal injury and/or damage to the TV.

---

What are the important safety instructions for the TCL TV?

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Please refer to the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.

11. The main plug is used to disconnect the device and should remain readily operable.

12. When not in use, tie up the power cordset with a cable tie or with something similar. It should not be near sharp edges as it may cause abrasion of the power cordset. When put into use again, make sure the power cordset is not damaged. If any damage is found, use a replacement power cord specified by the manufacturer or that is identical to the original one.

13. No open flame sources, such as lit candles, should be placed on, under, or near the apparatus.

14. Unplug this apparatus during lightning storms or when unused for long periods of time.

15. Only use attachments/accessories specified by the manufacturer.

16. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. Use caution when moving the cart/apparatus combination to avoid any injury.

17. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

18. For safe operation of the apparatus, please follow these installation requirements:

    • Keep at least 2 inches of ventilation space between the rear cover of the apparatus and the wall.
    • Keep at least 1 inch of ventilation space between the apparatus and all other surfaces.
    • Do not allow any of the apparatus’ ventilation openings to be blocked by objects that might obstruct them, such as newspapers, curtains, table-cloths or any other objects.
    • Do not expose the apparatus to any external heat sources. Do not place any heat sources such as candles, lamps, etc. on the apparatus.
    • Do not expose the device to high levels of humidity or to any possible sources of moisture.
    • When disposing of used batteries from the remote control, consult local regulations regarding proper disposal.

19. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-2011 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead in wire to an antenna-discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

---

What should I do if the equipment causes harmful interference to radio or television reception?

The user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

---

What are the battery cautions and disposal information for the TCL TV?

1. For best results, use alkaline-type batteries.
2. Do not mix Alkaline, Standard (Carbon-Zinc), or Rechargeable (Nickel Cadmium or Nickel Metal Hydride) batteries.
3. Always replace depleted batteries with two same brand-new batteries from the same manufacturer. Never use damaged batteries.
4. Do not use Rechargeable (Nickel Cadmium or Nickel Metal Hydride) batteries.
5. Install only new batteries of the same type. There is a risk of fire or explosion if the battery is replaced by an incorrect type.
6. Do not mix old and new batteries.
7. Batteries should not be exposed to extremely low air pressure as it may result in an explosion or the leakage of flammable liquid or gas.
8. Batteries should not be exposed to excessive heat, such as prolonged direct sunlight, open flame, or fire of any kind as it may result in an explosion or leakage of flammable liquid, or gas.
9. Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak.
10. Batteries should be recycled or disposed of as per state and local guidelines. Do not dispose of batteries in a fire, hot oven, or mechanically crushing or cutting a battery, which may result in an explosion.

---

What is in the box?

• TCL TV
• Power cable
• TV remote
• 2 x AAA batteries
• Wall mount bracket
• 4 x Magnetic bezels
• 2 x Magnetic bezel screws M2.5X7mm

---

What do I need to set up the TV?

• Phillips head screwdriver
• Router + Internet Connection (needed for streaming)

---

How do I set up the TCL TV?

1. Remove the TV from the box. Be careful, it’s heavy!
2. To use the decorative bezels: ① ② ③
3. Connect the power cable to the TV, then plug it into the wall outlet.
4. Power your TV remote by inserting the included batteries.
5. If applicable, connect external devices by referencing port label and descriptions.
6. Insert batteries in the correct polarity as indicated in the battery compartment.
7. Follow the on-screen guide to pair the remote control with the TV when pressing the button for the first time.

---

How do I pair the remote control?

Press and hold the “HOME” and “OK” buttons on your remote at the same time.

---

What are the functions of the buttons on the TCL TV remote?

• POWER: Turn TV on and off
• PROFILE SELECTOR: Switch profile
• SETTINGS: To display the dashboard menu
• GOOGLE ASSISTANT BUTTON: Press to activate the remote’s Google Assistant microphone. Search content through your voice by holding down the button.
• CIRCULAR D-PAD: Navigation direction buttons (Up/Down/Left/Right)
• OK BUTTON: To confirm an entry or selection
• BACK: Return to previous screen
• HOME: To access the TV homepage
• REMOTE MICROPHONE: Talk to the remote microphone after pressing the Google Assistant button
• ART MODE: To access artistic mode setting
• LIVE GUIDE: Open the Live TV Electronic Programming Guide (EPG)
• VOLUME (+/-): Raise and lower volume
• CHANNEL (CH ^/v): To change channels
• QUICK SETTINGS: Open the quick menu
• MUTE: Press the button to mute the sound
• VIRTUAL KEYBOARD: To display the on-screen keyboard
• INPUT (A): To select input source and display the quick panel

---

What are the ports on the TCL TV?

• LAN: Connect using a lan cable to your home network router or switch.
• HDMI (e)ARC PORT: Connect HDMI eARC/ARC (audio return channel) capable audio devices like sound bars or AV receivers.
• HDMI PORT: Highest quality audio/video connection. Connect cable box, Blu-ray player, gaming console, or other devices to your TV using HDMI cables.
• USB PORT: Connect a USB device to access photos, music, and movies.
• ANTENNA/CABLE IN: Connect an outdoor VHF/UHF antenna or Cable TV feed.
• OPTICAL (DIGITAL AUDIO OUT): Connect an optical cable to an external digital audio system.
• AV Input (analog audio/video): Connect older devices that use analog audio/video outputs. Compatible adapter (not included) connects to the RCA cable (video – yellow and audio – white and red) that you normally use to connect to that device.
• HEADPHONE OUT: Connect headphones or other external speakers.
• IR RECEIVER: Receives signal from the TV remote.
• STATUS LIGHT: Glows when the TV is in standby.
• POWER PORT: Connect your TV to the power source with the included power cable.
• POWER and OPTIONS BUTTON: Press the button to turn the TV on/off, or select the menu.

---

How do I complete the guided setup?

1. Once the language has been selected, you can quickly set up the TV using the Google Home app on an Android or iOS phone.
2. Or you can follow the easy on-screen instructions to setup your TV. If you aren’t ready to connect your TV to a wireless network, you can still use it as a regular TV.

To enjoy all smart features and services on your TCL TV with Google TV, a Google Account, a TCL account, and a reliable broadband internet connection are required.

---

How do I set up the TV with the Google Home app?

Download and open the Google Home app on your phone to get started. When instructed in the app, scan the QR code.

---

How do I get warranty service for the TCL TV?

Before submitting a request for warranty service, visit support.tcl.com for helpful FAQs and additional troubleshooting suggestions. To get warranty service, contact TCL Customer Support by visiting support.tcl.com/contact-us. Please have your Product type, model number, serial number, and ZIP code ready. Troubleshooting and prior approval from a TCL representative MUST occur before sending in your Product to a TCL Service Center.

---

What does the TCL North America Limited Warranty not cover?

• A Unit sold in “As-Is”, “Used”, “Factory Reconditioned”, “Factory Re-Certified”, or “Refurbished”, condition or with faults.
• Damage caused by transportation or handling, including damage during shipment from a Retailer (please contact your Retailer for assistance).
• Extended Service Plans purchased from Retailers. Please contact your Retailer for assistance.
• Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your Unit. Any additional information should be obtained from your Authorized Dealer).
• Service calls to your home for delivery or pick-up, installation, instruction, replacement of house fuses, connection of house wiring or plumbing, or to correct unauthorized repairs.
• Installation and related adjustments, or damage resulting from installation.
• Damage resulting from non-approved installation or repair methods.
• Failure of the Product to perform due to signal reception problems not caused by your Unit, or due to power failures or interruptions, or inadequate electrical service.
• Damage from misuse, abuse, neglect, insects, normal wear and tear, cosmetic damage, mishandling, faulty installation, inadequate electrical wiring, or power line surges.
• Damage caused by operating the Product in a corrosive or wet atmosphere.
• Markings or images on the television’s panel resulting from viewing fixed images (including but not limited to certain 4:3 images on wide screen televisions, or data or images in fixed screen locations from banners, video games, or certain broadcast networks).
• Units that have original factory serial numbers that are unreadable or missing, or that have been changed, defaced, or altered in any manner.
• Batteries.
• A television that has been modified or incorporated into other Products, or that has had the serial number removed or altered.
• Use of accessories or components that are not compatible with this Product.
• A Unit purchased or serviced outside of the United States.
• Costs of shipping the Unit to the Authorized TCL Service Center or TCL-designated address. TCL will pay for return shipping to the customer to a United States address only.
• Acts of nature or God (as illustrative examples and for the avoidance of doubt, such acts of nature or God include but are not limited to damage caused by earthquakes, fires, lightning, or flood whether caused by nature or humans).
• Special, incidental, or consequential damages.

---

What do I do if I cannot connect to wireless network (WiFi)?

• Select the correct wireless network name and verify the password entered (case sensitive).
• Relocate the router from objects that interfere with performance (cordless phones, baby monitors, etc.).
• Reboot the router by disconnecting the power for more than 2 minutes and reconnect.

---

What do I do if I am having trouble completing the guided setup?

It’s usually an easy fix.

---

What do I do if I have problems connecting my cable box or antenna through a coax cable?

• For best performance, use the HDMI connection.
• Make sure the cable connections to the TV and your device are securely fastened.
• Select cable or antenna input.
• Select the channel scan menu and follow the on-screen instructions to perform a full channel scan.

---

What is the remote code for programming my Universal or Cable box remote control?

Visit https://go.tcl.com/codes.

---

How do I use voice control through the remote control?

• In Google TV mode, press and hold the “HOME” and “OK” buttons on your remote at the same time.
• Keep your remote within 3 ft. of your TV during the pairing process.
• Then, when the TV display shows that the Google Assistant is ready – speak towards the remote microphone by holding down the Google Assistant button to ask a question or try a suggestion.

---

How do I turn Text-to-Speech (TTS) on or off?

• Select “Settings” from the home screen.
• Select “System”.
• Select “Accessibility”.
• Select “TalkBack”.
• Select “Enable” and press OK to turn it on or off.
• For more information visit: https://go.tcl.com/tts-atv

---

How do I update Parental Control password?

• Select “Settings” from the home screen.
• Select “System”.
• Select “Parental Controls” to set up or change your personal password.
• You can set up your personal password anytime.
• If you forget your personal password, you can use 0423 to reset.