Free English SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the storage drive configurations for the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The storage drive numbers and descriptions per node for the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC are detailed in the following table:
| Item | Description |
|---|---|
| 0-1 | Two hot-swap 2.5″ PCIe 5.0 NVMe (CPU1) drive bays |
| 2-5 | Four hot-swap 2.5″ PCIe 5.0 NVMe (CPU2) drive bays |
Which expansion slots are available per node on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The expansion slots available for each node of the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC are as follows:
| Slot | Description |
|---|---|
| A1 | PCIe 5.0 x16 AIOM slot (CPU1) in each node |
| 1 | PCIe 5.0 x16 low profile slot (CPU1) in each node |
What type of storage drives are supported by the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The system supports hot-swap 2.5 inch PCIe 5.0 NVMe drives.
How many hot-swap drive bays are controlled by CPU1 on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
CPU1 controls two hot-swap 2.5 inch PCIe 5.0 NVMe drive bays, identified as items 0-1.
How many hot-swap drive bays are controlled by CPU2 on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
CPU2 controls four hot-swap 2.5 inch PCIe 5.0 NVMe drive bays, identified as items 2-5.
Where is the control panel located on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The control panel is located on the front left side of the chassis.
What features are included on the front of the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC chassis?
Front features include the Control Panel, Service Tag, and Thumb Screws for securing the node.
What buttons are found on the control panel of the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The control panel contains a Power Button and a UID Button.
Which LED indicators are present on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC control panel?
The control panel includes a NIC LED and an Information LED.
How do I remove the top cover from the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
To remove the top cover, you must remove the two screws located at the rear edge of the cover and then slide the cover back to lift it off.
What rear features are available on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The rear features include Power Supplies, Expansion Slots (A1 and 1), Dual Function Switch IPMI/BMC LAN, USB Ports, and a VGA Port.
What is the default BMC ADMIN password for the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
Each system comes with a unique default password for the ADMIN user. This password can be found on a sticker located on the motherboard and also on the chassis service tag.
Can the BMC password be reset on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
Yes, if necessary, the BMC password can be reset.
How do I install or release an AIOM module on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The AIOM module is managed using a Thumbscrew and a Release Tab. Loosen the thumbscrew and use the release tab to pull the module from its slot.
What safety precaution should be taken before connecting the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC to a power supply?
You must see the installation instructions and safety warnings provided in the documentation before connecting the system to a power supply.
How can I reduce the risk of electric shock when servicing the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
To reduce the risk of electric shock or damage to equipment, disconnect power from the server by removing all power cords from the electrical outlets.
What should I do if a CPU socket is empty on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC motherboard?
If any CPU socket is empty, you must install a protective plastic CPU cap to prevent damage.
Are there specific requirements for the power supplies used in the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
Yes, always ensure all power supplies for the system have the same power output. If mixed power supplies are installed, the system will not operate.
Which processor controls the expansion slot A1 on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
Expansion slot A1 (the PCIe 5.0 x16 AIOM slot) is controlled by CPU1.
Which processor controls expansion slot 1 on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
Expansion slot 1 (the PCIe 5.0 x16 low profile slot) is controlled by CPU1.
What BMC controller is used in the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC motherboard block diagram?
The system utilizes an AST2600 BMC controller.
What type of memory modules are supported by the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The system supports DDR5 memory modules.
How are CPU1 and CPU2 connected in the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
CPU1 and CPU2 are interconnected via three UPI (Ultra Path Interconnect) links, operating at 16G, 20G, or 24GT/s.
Which component handles the USB 3.0 functions on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
A dedicated USB 3.0 Controller is used to manage the rear USB ports.
What is the purpose of the TPM header on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The TPM header allows for the connection of a Trusted Platform Module for enhanced hardware security.
How is the BMC LAN connected on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The BMC LAN connects through an NCSI Header to a Realtek RTD211F LAN controller.
What flash storage components are found on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC motherboard?
The motherboard includes BMC Flash, CPLD Boot Flash, Box Flash, and SPI Flash modules.
What interface is used to connect the NVMe drives to the processors on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The system uses MCIO (Mini Cool Edge IO) connectors in x4 and x8 configurations for PCIe 5.0 NVMe drive connectivity.
How many DDR5 memory channels are available per CPU on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
According to the block diagram, each CPU supports 8 memory channels (A through H).
What role does the CPLD play in the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The CPLD (Complex Programmable Logic Device) interfaces with the BMC via ESPI and connects to various flash modules and a MUX for system management and boot processes.
Does the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC support eMMC?
Yes, the motherboard block diagram shows an eMMC connection to the AST2600 BMC.
What sensor is integrated for monitoring the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
A temperature sensor (Temp Sensor) is connected to the BMC via the NCT7718W controller.
What type of video output is provided on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The system provides a VGA port driven by the AST2600 BMC.
What is the function of the COM1 header on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The COM1 header provides serial port connectivity for the system.
Which CPU handles the MCIO x8 connections for NVMe drives 0 and 1 on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
CPU1 (Socket ID 0) handles the MCIO x8 connections for drive bays 0 and 1.
Which CPU handles the MCIO x4 and MCIO x8 connections for NVMe drives 2 through 5 on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
CPU2 (Socket ID 1) handles the MCIO connections for drive bays 2, 3, 4, and 5.
What is the speed of the PCIe slots on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
Both expansion slots (A1 and 1) are PCIe 5.0 x16.
Is the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC a single-node or multi-node system?
Based on the “Expansion Slots (Per Node)” and “Storage Drive Numbers (Per Node)” descriptions, the system is a multi-node chassis.
Where are the USB ports located on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The USB ports are located on the rear of the chassis, next to the VGA port.
How many power supplies are visible on the rear of the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
There are two power supply units visible on the rear of the system.
What interface connects the BMC to the CPLD on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The AST2600 BMC connects to the CPLD via an ESPI interface.
What identifies the individual nodes from the front of the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The front view shows color-coded labels (A, B, C, D) corresponding to different nodes within the chassis.
What is the purpose of the Thumb Screws on the front of the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The Thumb Screws are used to secure the individual server nodes into the chassis.
Which component provides the SPI TPM functionality in the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The SPI TPM is connected through the SPI_TPM header as shown in the motherboard block diagram.
Does each node in the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC have its own expansion slots?
Yes, each node has its own set of expansion slots, specifically one AIOM slot and one low profile slot.
How is the AIOM module secured in the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The AIOM module is secured with a thumbscrew on the right side and a release tab on the bottom.
What is the function of the Dual Function Switch on the rear of the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The switch manages the IPMI and BMC LAN configurations for the node.
Are the drive bays hot-swappable on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
Yes, all six 2.5 inch drive bays per node are hot-swappable.
Which CPU is Socket ID 0 on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC motherboard?
Socket ID 0 corresponds to CPU1.
Which CPU is Socket ID 1 on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC motherboard?
Socket ID 1 corresponds to CPU2.
What is the speed of the UPI links between the processors in the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The UPI links operate at speeds of 16G, 20G, or 24GT/s.
Where can I find the Service Tag on the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The Service Tag is located on the front of the chassis, below the node’s control panel.
What happens if I use different power supplies in the SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC?
The system will not operate if mixed power supplies with different power outputs are installed.
CLICK HERE TO DOWNLOAD SUPERMICRO SUPERSERVER SYS-222BT-HNR-LCC (01) PDF DOCUMENT