FREE ENGLISH SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF USER GUIDE
FREE ENGLISH SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF USER MANUAL
FREE ENGLISH SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF OWNER GUIDE
FREE ENGLISH SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF OWNER MANUAL
FREE ENGLISH SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF REFERENCE GUIDE
FREE ENGLISH SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF INSTRUCTION GUIDE
FREE ENGLISH SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF REFERENCE MANUAL
FREE ENGLISH SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF INSTRUCTION MANUAL
FREE ENGLISH SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF SUMMARY:
What are the optional accessories for the LED Linear High Bay Light?
The optional accessories are a pendant mount (LHBD2-PH) and a microwave motion sensor (BRI816-B-D).
What safety precautions should be taken when installing or servicing the product?
The product should be installed and serviced by a certified electrician in accordance with applicable national, state, and local building and electrical codes. To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures. Avoid looking directly into the lamp when it is illuminated. Ensure all mounts are securely attached and will support the weight of the fixture. Failure to properly support the fixture may result in damage or injury, for which the manufacturer does not assume responsibility.
What is the first step to install the suspension chain mount?
Switch off the supply power.
How do you install the suspension hooks?
Install suspension hooks (not provided) in the ceiling as illustrated. Ensure the mounting hook location can support the weight of the fixture.
What are the mounting hole distances for the LED Linear High Bay Light?
The mounting hole distance for the 4 ft model is 45.5 in (1156 mm) and the mounting hole distance for the 2 ft model is 23.25 in (641 mm).
What is the third step of the suspension chain mounting installation?
Hang provided suspension chains on hooks.
What is the fourth step of the suspension chain mounting installation?
Connect wiring and conduit to fixture.
How do you attach the v-shaped hanger to the fixture?
Attach the v-shaped hanger to the fixture by hooking it into holes on each side of the fixture.
What is the sixth step of the suspension chain mounting installation?
Hook the v-shaped hanger to chains to secure the fixture.
What is the last step in the suspension chain mounting installation?
Switch on the supply power.
What is the first step to install the pole/pendant mount?
Switch off the supply power.
What is the second step of the pole/pendant mounting installation?
Attach the pole/pendant mounting bracket to a rigid conduit.
What is the third step of the pole/pendant mounting installation?
Connect wiring using the knockout on the access plate.
What is the fourth step of the pole/pendant mounting installation?
Attach the fixture to the mounting bracket using provided hardware.
How do you install the side plates?
Install the side plates using the provided hardware.
What is the last step of the pole/pendant mounting installation?
Switch on the supply power.
What is the wiring configuration for the LED Linear High Bay Light?
The wiring configuration consists of a black wire for the line, a white wire for the neutral, and a green wire for the ground. There is also a purple wire for Dim (+) and a gray wire for Dim (-).
Can an external dimmer be used if the microwave motion sensor is installed?
No, an external dimmer cannot be used if the microwave motion sensor is installed.
What is the first step to install the optional motion sensor?
Remove screws holding the door in place.
What is the second step to install the optional motion sensor?
Remove the knockout in the door.
What is the third step to install the optional motion sensor?
Set the DIP switch settings for the motion sensor.
How do you install the motion sensor?
Place the motion sensor through the door and tighten the nut to secure it in place.
What is the fifth step of the optional motion sensor installation?
Connect the wiring according to the wiring diagram.
What is the sixth step of the optional motion sensor installation?
Close the door and tighten the screws.
What is the final step of the optional motion sensor installation?
Line up the pins of the sensor and insert them into the module. Turn clockwise to lock in place.
CLICK HERE TO DOWNLOAD SUPER BRIGHT LEDS LHBD2-50K3-220W-H (01) PDF MANUAL