SPIDER FARMER SF-PLANTSTAND110 (01) PDF MANUAL

Model	SF-PlantStand60
Spectrum	Full Spectrum (3000K+5000K+660nm)
Beam Angle	180±5 Degrees
Input Voltage	100V to 277V AC
Frequency	50/60HZ
Input Power	9W±10%(Single Bar)
Waterproof Level	IP65
Light Bar Quantity	6PCS
Single Bar Size	30.5×3.3×3.2±0.2cm
Plant Stand Size	40X30X120cm
Tent Size	41*31*120cm
Tent Material	1680D Oxford Canvas + TPU
Package Size	45*35*22.5cm
Gross Weight	9.2kg

Model	SF-PlantStand110
Spectrum	Full Spectrum (3000K+5000K+660nm)
Beam Angle	180±5 Degrees
Input Voltage	100V to 277V AC
Frequency	50/60HZ
Input Power	18W±10%(Single Bar)
Waterproof Level	IP65
Light Bar Quantity	6PCS
Single Bar Size	30.5×3.3×3.2±0.2cm
Plant Stand Size	70X35X150cm
Tent Size	71*36*150cm
Tent Material	1680D Oxford Canvas + TPU
Package Size	74.5*39*21cm
Gross Weight	13.6kg

Model	SF-PlantStand230
Spectrum	Full Spectrum (3000K+5000K+660nm)
Beam Angle	180±5 Degrees
Input Voltage	100V to 277V AC
Frequency	50/60HZ
Input Power	25W±10%(Single Bar)
Waterproof Level	IP65
Light Bar Quantity	10PCS
Single Bar Size	88.5×3.3×3.2±0.2cm
Plant Stand Size	110X40X180cm
Tent Size	111*41*180cm
Tent Material	1680D Oxford Canvas + TPU
Package Size	114*44.5*27cm
Gross Weight	26.4kg

Model (SF-)	PlantStand60	PlantStand110	PlantStand230
Light Bar	6	6	10
150cm Power Cable	1	1	1
35cm Connecting Cable	3	3	5
60cm Connecting Cable	2	2	4
Plastic Tie	16	16	24
Metal Clip	12	12	20
Waterproof Cap	1	1	1
Wire Mesh	4	4	6
Bottom Pole With Feet	4(40cm)	4(60cm)	4(89cm)
Middle Pole Connecting Pole	4(40cm)	4(30cm)	/
Top Pole With Top End	4(40cm)	4(60cm)	4(89cm)
Plastic Clip	32	32	48
Caster with Lock	4	4	4
Waterproof Mat	3	3	5
Semi-Transparent Tent	1	1	1

Here are the assembly instructions:
Step 1: Take out the four bottom pole with feet. Secure the plastic clips at the same height on each pole. It will utter a sound while installing well the clip. (Set the height according to your needs, making sure the “TOP” side of the clip faces up.)
Step 2: Slide the wire mesh onto the four poles, stand it up, and gently tap the connections to secure them.
Step 3: Use the four middle poles to spiral tighten clockwise with the bottom poles. Repeat the previous steps to install the second and subsequent layers.
Step 4: Lay the shelf down, unscrew the feet, and replace them with casters if needed.
Step 5: Connect the lights as shown, ensuring the correct positioning of the 35 cm and 60 cm connection cables. Install the waterproof cap on the last light bar.
Step 6: Thread plastic ties through the metal clips and secure the clips to the wire mesh.
Step 7: Snap the light bars into the metal clips. Repeat this step to install the remaining light bars.
Step 8: Place the waterproof mat on the wire mesh, ensuring the drainage holes face outward. Secure the four corners with ties.
Step 9: Unfold the tent, unzip the sides, sleeve it from the top of the shelf, and zip it up. Done!

Gently tap upward on the four corners of the sleeve to remove the wire mesh panel.

• Please read through all the instructions and ensure you have all the parts before you start assembling them.
• If the product is damaged during transportation or has missing accessories, please contact us immediately.
• Install the product on a flat surface without any vibration, shaking, or fire hazards.
• This product is for indoor use only.
• Ensure that your power source meets the electrical requirements of this product.
• As a semiconductor product, the lights are sensitive to temperature. To extend their lifespan, keep them away from heat sources, ensure proper ventilation, and maintain a temperature between 0°C and 25°C.

Spider Farmer offers warranty services in the United States, Canada, the United Kingdom, Europe, and Australia.

30-Day Return Policy: Returns or exchanges are accepted within 30 days of delivery if the product is in its original condition with all original packaging, accessories, and gifts. For returns not due to quality issues, the customer will be responsible for return shipping costs.

2-Year Warranty:

• First Year: Free repair, replacement, and shipping for any quality issues.
• Second Year: Free parts provided; customers are responsible for the shipping costs of parts.

If the tent is defective, Spider Farmer will provide after-sales services according to the following rules.

• Free parts will be provided within 3 months of the date the receipt was issued.
• Free parts will be provided within 3-6 months of the date the receipt was issued but the customer will bear the shipping costs.
• After 6 months from the date of issuance of the receipt, the customer must bear all after-sale costs such as parts and shipping costs.

Important Notice: Unauthorized repairs, modifications, or improper use will void the warranty.