SOUNDBOT SB571 (01) PDF Document

Before the initial first use, please charge the SOUNDBOT SB571 speaker for a full 6 hours. The LED indicator light will turn red when it is being charged and will go off when it’s fully charged.

1. Be sure that your SOUNDBOT SB571 is fully charged.

2. Turn on the Bluetooth connectivity of your Bluetooth-enabled media device (e.g., iPhone, iPad, Smartphone, Computer) and set the media device to be “visible” or “discoverable.”

3. Turn on the SOUNDBOT SB571 by switching the power button on the back of the speaker.

4. After turning on the SB571, the LED lights will alternate between red and blue to indicate that the speaker is in “pairing mode.”

5. Choose “add new Bluetooth device” or “setup Bluetooth device” on your media player device to search for Bluetooth devices. Select SB571 to pair and connect.

6. Once paired successfully, the LED indicator lights will turn blue and blink twice every 3 seconds.

If the pairing attempt fails or times out (after roughly 3 minutes), delete all the paired devices from the paired Bluetooth devices on your media player. Then, reboot both your media player and the SOUNDBOT SB571 speaker before repeating the pairing process from step 2 to 6.

If pairing with another Bluetooth enabled device is required, press the Play/Pause button for 3 seconds. The speaker will be disconnected from the previous paired Bluetooth device, followed by an alert tone “pairing.” You can then repeat the pairing process (Steps 2-6) to pair with the new device such as a tablet, smartphone, iPhone, computer, etc.

Once the SOUNDBOT SB571 speaker is connected to a Bluetooth enabled device, you can use the following controls:

Skip/Previous: Press the SKIP/PREVIOUS button to skip to the next soundtrack or play the previous soundtrack.

Volume: Press and hold the UP/DOWN button on the speaker to increase or decrease the volume.

Play/Pause: Press the Play/Pause button on the speaker to start or pause songs.

Tips: The A2DP compatible media device (sound source) may have another set of volume UP/DOWN controls. To maximize/minimize the volume, please adjust the volume on both the media player and the SB571. For non-A2DP media players, volume can be adjusted from the media player.

The SOUNDBOT SB571 can function as a portable speakerphone for incoming calls when connected wirelessly via Bluetooth.

To answer a call: Press the TALK/PLAY button.

To end a call: Press the TALK button again.

To refuse an incoming call: Double-click the TALK button.

To redial the last number called: Double-click the TALK button.

When the speaker is connected to an iPhone/iPad via Bluetooth, press and hold the TALK button for 3 seconds to activate the SIRI function on your iPhone/iPad. Then talk to the speaker after hearing the “SIRI” alert.

Tips:

1. iPhone/iPad may not be able to recognize speech commands with a noisy background.

2. SIRI may not work if the iPhone/iPad is not connected to the internet.

If your media device is not Bluetooth enabled, you can still connect it to the SOUNDBOT SB571 via the 3.5mm line-in audio jack.

Tip: The TALK, PLAY/PAUSE, PREVIOUS & NEXT buttons only work when the SB571 is connected wirelessly via Bluetooth. In case of a wired connection, the soundtrack can only be controlled from the media player device.

Yes, when the SOUNDBOT SB571 speaker is connected to an iPhone/iPad via Bluetooth, the battery status of the speaker can be displayed on the iPhone/iPad screen.

Do not expose the speaker to liquid, moisture, or humidity to avoid damage to the product’s internal components.

Do not expose the speaker to extremely high or low temperatures as this may shorten the life of the electronic device, destroy the battery, and/or distort certain plastic parts.

Do not dispose of the speaker in fire as its circuitry may explode.

Avoid using the SB571 with sharp objects, as it may cause scratches and damages.

Do not attempt to disassemble the speaker.

Keep the unit away from heat sources, direct sunlight, humidity, water, and any other liquids.

Do not operate the unit if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the unit.

Do not use the unit if it has been dropped or damaged in any way.

Do not puncture or disassemble the exterior surface of the product in any way.

Keep the unit free from dust, lint, etc. Do not use this unit for anything other than its intended use or purpose.

Keep the product out of reach of children.

Do not use the speaker at an excessive volume level as it may damage hearing.

Do not expose batteries or the battery pack to excessive heat, such as direct sunlight or open flame.

The following items are included in the box:

• SB571 Bluetooth 6W+6W Stereo Speaker

• MicroUSB Charging Cable

• 3.5mm Audio Cable

• User Guide