SONY PLAYSTATION VR CUH-ZVR2 (03) PDF DOCUMENT

The SONY PLAYSTATION VR CUH-ZVR2 headset is not for use by children under age 12.

Do not use the SONY PLAYSTATION VR CUH-ZVR2 if you are tired, dizzy, light-headed, nauseous, sick, under the influence of alcohol or drugs, or have an impaired sense of motion or balance. Consult a doctor before using the SONY PLAYSTATION VR CUH-ZVR2 if you suffer from a serious medical condition.

Some people may experience motion sickness, nausea, disorientation, blurred vision or other discomfort. If experienced, stop using immediately and remove the VR headset. If you experience any discomfort after use, rest and do not engage in any activities that require unimpaired vision, balance or coordination until after symptoms have completely disappeared.

It may take some time to become accustomed to virtual reality experiences. During initial use, it is recommended that you use the product for short periods of time.

IMMEDIATELY DISCONTINUE USE and consult your doctor before resuming gameplay if you or your child experience any of the following health problems or symptoms:

• Dizziness

• Altered vision

• Eye or muscle twitches

• Loss of awareness

• Disorientation

• Seizures, or any involuntary movement or convulsion.

RESUME GAMEPLAY ONLY ON APPROVAL OF YOUR DOCTOR.

Additionally, DISCONTINUE USE IMMEDIATELY when you experience any of the following symptoms: headache, dizziness, nausea, fatigue, similar symptoms to motion sickness, or discomfort or pain in any body part such as eyes, ears, hands, arms, feet whilst playing. If the condition persists, seek medical attention.

If you have an epileptic condition or have had seizures, consult your doctor prior to using this product.

Some individuals are sensitive to flashing or flickering lights or geometric shapes and patterns, may have an undetected epileptic condition and may experience epileptic seizures when playing videogames or watching video content.

DISCONTINUE USE IMMEDIATELY and consult your doctor if you experience any of the following health problems or symptoms when exposed to flashing or flickering lights or other light stimulation whilst playing video games or watching video content: eye soreness, altered vision, migraine, muscle twitching, convulsion or other involuntary movements, blackout, loss of awareness, or confusion or disorientation.

• Wearing the VR headset will restrict your view of your actual surroundings. The VR headset does not detect obstacles. Review surroundings and clear obstacles from an area larger than the Play Area before use. Make sure you are not near any walls, stairs, furniture, or other obstacles that you may collide with or trip over.

• Take steps to prevent pets, persons, or other obstacles from entering an area larger than the Play Area during use.

• Remain in the centre of the Play Area and do not walk around while wearing the VR headset. Remain seated whenever possible and avoid extreme or excessive movements of the head, limbs or body whilst wearing the VR headset. If an application requires you to stand while wearing the VR headset, ensure that you follow the application instructions carefully.

• Before beginning play, check that the VR headset cable is not wrapped around your body or limbs, and check frequently during play.

• Do not use the product in a location that may be subject to shaking or other unstable conditions.

• Generally we recommend that you take 15 minute breaks for every hour of play. However, when viewing virtual reality content, the length and frequency of necessary breaks may vary from person to person – please take breaks that are long enough to allow any feelings of discomfort to subside.

• Do not use the product when you are tired or need sleep.

Permanent hearing loss may occur if the headset or headphones are used at high volume. Set the volume to a safe level. Over time, increasingly loud audio may start to sound normal but can actually be damaging your hearing. If you experience ringing or any discomfort in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected.

• Regularly inspect the AC power cord for damage and dust build-up around the power plug or electricity supply.

• Stop use, unplug the AC power cord from the electricity supply and disconnect any other cables immediately if the device functions in an abnormal manner, produces unusual sounds or smells or becomes too hot to touch.

• Connect and use the product within easy access to the socket outlet in case you need to disconnect the product for any reason.

Keep the product out of the reach of small children. Small children may swallow small parts, may pull on cables and cause the processor unit or VR headset to fall, or may wrap the cables around themselves, which may inflict injury or cause an accident or a malfunction.

• Do not use the VR headset, stereo headphones, or stereo headset (sold separately) if they cause discomfort to your skin. If the headset or headphones cause discomfort to your skin, discontinue use immediately. If symptoms do not subside even after discontinuing use, seek medical attention.

• Do not unplug the VR headset cable until the tracking lights are turned off. Removing or unplugging while the lights are on may cause a malfunction.

• Do not swing the VR headset or the AC adaptor around by their cables.

• Do not place objects on the product, throw or drop the product, or otherwise expose it to strong physical impact.

• Do not throw or drop the product or subject it to strong physical shock.

• Do not put heavy objects on the product.

• Follow the precautions below to help prevent the product exterior from deteriorating or discolouring.

– Do not use solvents or other chemicals on the product.

– Do not allow rubber or vinyl materials to be in prolonged contact with the product.

• Limit the amount of time you use the headset or headphones at high volume.

• Avoid raising the volume to block out noisy surroundings.

• Lower the volume if you can’t hear people speaking near you.

Avoid prolonged bodily contact with the processor unit, AC adaptor, or air from the vents when the product is turned on. Extended contact may cause low-temperature burns. Low-temperature burns are burns that occur when the skin is in contact with objects of relatively low temperatures (40 °C or more) for an extended period of time.

• Before connecting, check that the connectors are free of dust and small particles.

• Do not allow liquid or small particles to get into the product.

• Do not touch the AC power cord, AC adaptor or processor unit during an electrical storm.

• Do not touch the product with wet hands.

• Do not expose the product to dust, smoke or steam. Dust or other matter can cause fire or electric shock.

It is important that you place the VR headset on your head properly during use.

• To see instructions on how to wear the headset, go to the PS4 console’s function screen, and then select (Settings) > [Devices] > [PlayStation VR].

• Do not overtighten the adjustment dial.

• You can wear the VR headset over your glasses, but take care that your glasses do not touch the VR headset lenses. Ensure your glasses fit well so they don’t move around when you are playing and take care when adjusting the scope and headband. Do not push in or pull out the scope excessively. Having your glasses touch the VR headset lenses could result in damage to your glasses, the VR headset lenses or both.

• Regularly check the VR headset’s fit to ensure it is being worn properly.

• Do not expose the lenses of the VR headset to direct sunlight or intense light. Doing so may damage the VR headset screen and cause a malfunction.

• Keep the VR headset’s attachment sensor free from any obstacles. If the attachment sensor is blocked, the screen will not turn off automatically even if you remove the headset. If an image appears on the screen for an extended period of time, it might cause a screen burn and a faint image might remain permanently on the screen.

If the SONY PLAYSTATION VR CUH-ZVR2 is brought directly from a cold location to a warm one, moisture may condense inside the VR headset and the processor unit. Should this occur, the product may not operate properly. In this case, turn off the VR headset and unplug the AC power cord from the electrical outlet. Do not use the product until the moisture evaporates (this may take several hours).

Press the (power) button on the VR headset for at least 7 seconds to force a shutdown, and then turn on the headset again. If the problem persists, restart the PS4 console.

• If the processor unit’s internal temperature becomes elevated, a message will be displayed. In this case, turn off the PS4 console and leave it unused for a while. After the processor unit cools down, move it to a location with good ventilation, and then resume use.

• Do not block the processor unit’s vents, and do not use the product in a closed cabinet or other locations where heat may build up.

• Use an electricity supply that is easily accessible, so the AC power cord can be unplugged quickly if the need arises. Stop use, unplug the AC power cord from the electricity supply and disconnect any other cables immediately if the product functions in an abnormal manner, produces unusual sounds or smells or becomes too hot to touch.

• Unplug the AC power cord from the electricity supply when the status indicator on the processor unit is red. Unplugging the cord while the indicator is white or flashing red may cause a malfunction.

• Do not use an AC adaptor or AC power cord other than those supplied with the product. The supplied AC adaptor and AC power cord are designed exclusively for use with this product. They cannot be used with other products. In addition, other AC adaptors or AC power cords cannot be used with this product. Failure to follow these precautions may cause the product to overheat and may lead to fire or electric shock.

– Do not plug the AC power cord for the product into an electricity supply until you have connected the HDMI™ cables.

– Do not touch the plug of the AC power cord with wet hands.

– Do not use the AC adaptor when it is covered by a cloth, as it may overheat, causing fire or malfunction.

– Unplug the AC power cord from the electricity supply before cleaning or when you do not intend to use the product for an extended period of time.

– Do not connect the AC power cord to a voltage transformer or inverter.

• Do not expose the product or accessories to high temperatures, high humidity or direct sunlight during operation, transportation and storage.

• Do not heat the product with kitchen or heating equipment such as a dryer. It may lead to fire, injury or malfunction.

• Do not place the product or accessories on surfaces that are unstable, tilted or subject to vibration.

• Used with your PS4 console and PlayStation®Camera, the SONY PLAYSTATION VR CUH-ZVR2 brings you the excitement of virtual reality. You can interact with games more directly because the camera captures the position, angle, and movement of the VR headset.

• Be sure to always update your PS4 system software and PS VR device software to the most recent version.

• Be sure to connect your VR headset to the supplied CUH-ZVR2 processor unit. The headset will not work if connected to a CUH-ZVR1 processor unit.

• To use your PlayStation Camera for PS4 with your PS5 console, use the included PlayStation Camera adaptor. Connect the adaptor to the camera and the USB Type-A port on the back of your PS5 console.

Remain seated wherever possible. For applications with a standing mode, follow the application instructions carefully.

To configure PS VR settings, go to the PS4 console’s function screen, and then select (Settings) > [Devices] > [PlayStation VR].

Hints:

• These settings are available only when the SONY PLAYSTATION VR CUH-ZVR2 is connected to the PS4 console.

• You can also configure some settings from the quick menu that appears when you press and hold the (PS) button on the controller.

• For more information about setting up your SONY PLAYSTATION VR CUH-ZVR2, refer to the user’s guide for the PS4 console. Select (Settings) > (User’s Guide/Helpful Info) > (User’s Guide) from the function screen.

The PS4 console contains settings that parents or guardians can configure as necessary to restrict use of the product by children. To configure settings for each child, go to the PS4 console’s function screen, and then select (Settings) > [Parental Controls/Family Management].

VR headset (Front)

A) Tracking lights (front)
– Rear lights blue: Powered on
– Front and rear lights blue: VR mode
– Front and rear lights off: Powered off

B) Scope adjustment button

C) Front head support

D) Rear head support

E) HDMI connector

F) AUX connector

G) Scope

VR headset (Rear)

A) Headband

B) Attachment sensor

C) Lenses

D) Adjustment dial

E) Headband release button

F) Tracking lights (rear)

G) Earpiece holder

VR headset (Bottom)

A) Stereo headphone jack

B) Headphone attachment hole

C) (power) button

D) Light shield

E) Microphone

F) Tracking lights (front)

G) Volume + button

H) (microphone mute) button

I) Volume – button

Processor unit (Front)

A) Status indicator
– White: Powered on
– Red: Rest mode

B) AUX port

C) HDMI output port

Processor unit (Rear)

A) HDMI TV port

B) HDMI PS4 port

C) (USB) port

D) DC IN 12V connector

E) Vent

Stereo headphones

A) Earpiece

B) Stereo headphone plug

C) Fastener

The stereo headphones are supplied with M size earpieces attached. Replace the earpieces with the S or L size earpieces for a better fit. To remove, twist then pull the earpiece off the headphones.

Hint: Install the earpieces firmly to help prevent them from accidentally detaching during use.

Be sure to follow the instructions below to clean and maintain your product.

• For safety reasons, unplug the AC power cord from the electricity supply and disconnect any other cables before cleaning.

• Do not use solvents or other chemicals to clean the exterior surfaces.

• Do not use a chemically-treated cleaning cloth to wipe the product.

Processor unit exterior, VR headset exterior, head supports, connectors

If they are dirty, wipe them with a soft, dry cloth.

Lenses

Wipe only with a soft, dry cloth made specifically for cleaning lenses. Do not use paper products such as paper towels, or tissues not specifically intended for lenses.

Light shield

Remove the light shield from the VR headset and wash it with water. Dry it completely with a soft cloth before reattaching it to the headset. Reattach the light shield by matching the nubs on the shield to the 13 holes on the VR headset.

Vents

Remove dust build-up from the vents using a vacuum cleaner or similar product.

Earpieces

Remove the earpieces from the stereo headphones and wash them by hand with a mild detergent. Dry them completely with a soft cloth before reattaching them to the headphones.

VR headset

Screen	1920 × RGB × 1080 (960 × RGB × 1080 per eye)
Sensor	6-axis motion sensing system (3-axis gyroscope, 3-axis accelerometer)
Port	Stereo headphone jack
External dimensions	Approx. 187 × 185 × 277 mm (width x height x depth / excluding projecting parts / at shortest headband length)
Mass	Approx. 600 g (excluding cables)
Operating temperature	5 °C to 35 °C

Processor unit

Input/output	HDMI TV port, HDMI PS4 port, (USB) port, HDMI output port, AUX port
Maximum rated power	Approx. 20 W
Electrical rating	12 V ⎓ 1.7 A
External dimensions	Approx. 150 × 39 × 114 mm (width × height × depth / excluding projecting parts)
Mass	Approx. 300 g
Operating temperature	5 °C to 35 °C

AC adaptor

Input	100-240 V ~ 1 A 50/60 Hz
Output	12.0 V ⎓ 3.0 A
External dimensions	Approx. 108 × 46 × 30 mm (width × height × depth / excluding projecting parts)
Mass	Approx. 146 g

PlayStation Camera adaptor (for PS5) (CFI-ZAA1)

Ports	AUX port, USB Type-A connector (SuperSpeed USB 5Gbps)
Input power rating	5 V ⎓ 500 mA
External dimensions	Approx. 87 × 17 × 25 mm (width × height × depth / excluding cable)
Mass	Approx. 38 g
Operating temperature	5 °C to 35 °C