SONY BRAVIA XBR-55HX929 (01) PDF Document

Step 1. Remove the protection sheet.

Step 2. Push and slide the cover upward to insert the size AAA batteries.

Point your remote control directly at the IR sensor located on your SONY BRAVIA XBR-55HX929.

Make sure that no objects are blocking the path between the remote control and the IR sensor on your TV.

Fluorescent lamps can interfere with your remote control; try turning off the fluorescent lamps if you are having issues.

If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted.

Disconnect all cables when carrying the TV.

Carry the TV with an adequate number of people, as larger size TVs require two or more people.

Correct hand placement while carrying the TV is very important for safety and to avoid damage.

Step 1. Complete your cable connections before proceeding with the Initial Setup and connect the TV to your nearest power outlet.

Step 2. Check that the ENERGY SAVING switch setting is on.

Step 3. Press the power button on the TV. The power indicator will light green. When you switch the TV on for the first time, the Language menu appears on the screen.

Step 4. Follow the instructions on the screen.

Step 5. Select Continue to scan for available channels and enable the Rovi On Screen Guide feature. If you receive channels from a cable box or satellite receiver and do not wish to use the TV’s built-in tuner, select Skip.

Check that the ENERGY SAVING switch is set to on.

Press the power button on the TV or the power button on the remote control to turn on the TV.

Check the antenna or cable connection.

Connect the TV to the AC power and press the power button on the TV.

If the standby indicator lights up in red, press the power button on the remote control.

Unplug the TV and other connected equipment from the wall outlet before you begin cleaning your TV.

Wipe the LCD screen gently with a soft cloth.

Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.

If using a chemically pretreated cloth, please follow the instructions provided on the package.

Never spray water or detergent directly on the TV set as it may drip to the bottom of the screen or exterior parts and enter the TV set, which may cause damage.

Never use strong solvents such as a thinner, alcohol or benzine for cleaning.

Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated.

Enter 4357 for the PIN code, as this PIN code is always accepted.

Yes, the following table shows the supported formats for your SONY BRAVIA XBR-55HX929 inputs: