SOKANI COLA 60X (01) PDF Document

The SOKANI COLA 60X has the following highlights:

• 60W high-power LED beads with high brightness and stable light source.

• Color rendering index is above 96, R9 is above 90, TLCI(Qa)>95, truly restoring the colors of objects.

• Equipped with 2 light effect modes (CCT mode, FX special effect mode).

• Supports mobile Bluetooth APP control.

• DC 12V-20V input/USB-C PD 3.0 input.

• Accurate display of large LCD screen.

• Specially designed bead protection cover to prevent damage from touch or collision.

• Efficient heat dissipation module with temperature control protection to extend the life of the beads.

• Mini Bowens mount design with strong compatibility, allowing for the expansion of more controllable light effect accessories, easily achieving various creative ideas.

• 60 effects – FX special effects mode has 6 special effects and 10 levels of speed adjustment.

The main unit of the SOKANI COLA 60X consists of the following parts:

01. Lock Button

02. Accessory Slot

03. LED

04. Bead Protection Cover

05. Heat Dissipation

06. 1/4 Mounting Hole

07. LCD Color Screen

08. Power Button

09. Adjustment Button

10. Power Interface (DC 12V-20V)

11. Power Interface (USB-C PD 3.0)

To start using the SOKANI COLA 60X, you can power it in two ways:

1. DC Power Supply: Connect the adapter to the AC power source, then connect the adapter’s DC plug to the light’s DC port.

2. PD Power Supply: Connect the USB-C cable to a PD 3.0 charger, then connect the other end of the USB-C cable to the light’s USB-C power port.

After connecting the power, press and hold the left knob for 3 seconds to turn on. The photography light’s LCD will display the current information of the host and enter the working state.

Note: When both DC and PD are connected to the power source, the light will prioritize power from the port that was connected first.

To adjust the CCT mode on the SOKANI COLA 60X, follow these steps:

1. Press the adjustment button to enter CCT mode; the LCD screen will display CCT mode.

2. Rotate the adjustment button left or right to adjust brightness, with an adjustable range of 0%-100%.

3. Rotate the adjustment button left or right to adjust the output color temperature.

After about 3 seconds, the icon defaults to adjusting brightness and saving the current parameters.

To use the FX Special Effects mode on the SOKANI COLA 60X, follow these instructions:

1. Press the adjustment button to enter FX special effect mode. Press the FX key to switch between different modes and display the current effect name on the last line of the display.

2. Rotate the button to adjust the brightness, with an adjustable range of 0 to 100%.

3. Rotate the button to adjust the effect frequency (the larger the value, the higher the frequency).

4. Rotate the button to switch between different FX special effect modes.

The current parameters are saved after about 3 seconds.

The content displayed on the last line of the interface corresponds to the mode:

To connect your SOKANI COLA 60X to the app, follow these steps:

1. Turn on Bluetooth on your mobile phone and turn on SOKANI lamps.

2. Open the “SS LED Video Light” APP, click “Add Device,” and select the light you want to connect.

In any mode, the Bluetooth icon flashing on the light’s LCD screen indicates that the light is in a connectable state, and the “SS LED Video Light” APP can connect. If the Bluetooth icon does not flash, it indicates that the light is already connected, and the “SS LED Video Light APP” can control the light.

In any mode, the Bluetooth icon flashing on the light’s LCD screen indicates that the light is in a connectable state, and the “SS LED Video Light” APP can connect. If the Bluetooth icon does not flash, it indicates that the light is already connected. Select the connected lighting from the “My Devices List” under the “SS LED Video Light” APP to enter the light control interface.

3. Turn on and enter SET mode, the Bluetooth icon will display the unique Bluetooth code of this device, which can be scanned in the APP to find the corresponding coded light.

Please observe the following precautions when using your SOKANI COLA 60X:

• Do not look directly at the light when it is on.

• Do not place or put any objects on the lamp or let liquids flow into it.

• The device has a temperature protection feature function. When the temperature is too high (>75°C, the temperature icon flashes, >80°C), it enters protection mode, limiting the maximum brightness to 20%. It will return to normal when the temperature drops. Be careful of high surface temperatures during extended use. Please pay attention to anti-scalding.

• Do not touch the product with wet hands, and do not immerse it in water or expose it to rain.

• Do not disassemble or modify the product. If the product is damaged due to falling or other accidents, please send it to an authorized service center manufacturer’s authorized repair center for inspection and repair.