SILENTPOWER LAN IPURIFIER PRO (01) PDF Document

Free English SILENTPOWER LAN IPURIFIER PRO (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD SILENTPOWER LAN IPURIFIER PRO (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

What are the features of the SILENTPOWER LAN IPURIFIER PRO?

The features of the SILENTPOWER LAN IPURIFIER PRO include:

Optical Galvanic Isolation to isolate electrical noise and interference, reduce system noise, errors and jitter from the router or switch
Employs cutting-edge tech including adaptive equalisation, error correction, and crosstalk cancellation, ensuring a cleaner signal
Ultra-low noise internal DC-DC power supply design
Supports 1000BASE-T (IEEE 802.3x) Ethernet

How do I connect the USB-C (5V) Power to the SILENTPOWER LAN IPURIFIER PRO?

Please connect the SILENTPOWER LAN IPURIFIER PRO to the supplied power adapter or other USB-C 5V/1A power adapter.

Which port is recommended as the input port in the Standard Network Port Section of the SILENTPOWER LAN IPURIFIER PRO?

Each network port supports input and output, and the standard network port (2) is recommended as the input port.

How do I use the Standard RJ45 Ethernet Port on the SILENTPOWER LAN IPURIFIER PRO?

Connect a network cable with a RJ45 connector. This is a standard RJ45 Ethernet port without optical isolation and is recommended for use as an input port.

Which port is recommended as the output port in the Optical Isolated Network Port Section of the SILENTPOWER LAN IPURIFIER PRO?

Each network port supports input and output, the OPTICAL ISOLATED network port (4) is recommended as the output port.

How do I use the Optical Isolated RJ45 Ethernet Port on the SILENTPOWER LAN IPURIFIER PRO?

Connect a network cable with a RJ45 connector. This is the RJ45 Ethernet port with optical isolation, recommended to be used as an output port for better network signal quality.

How do I use the LED brightness setting buttons on the SILENTPOWER LAN IPURIFIER PRO?

This button cycles through 3 brightness modes (see item 5-8):

Screen Brightness (Short press)

High/Low/Off

What does the Power On/Off LED on the SILENTPOWER LAN IPURIFIER PRO show?

The LED shows the current power connection status of the SILENTPOWER LAN IPURIFIER PRO.

LED	Status
On	Normal
Off	No connection

What does the Network Connection Speed LED on the SILENTPOWER LAN IPURIFIER PRO show?

The LED shows the current network transfer speed of the SILENTPOWER LAN IPURIFIER PRO.

	LED	Speed
6a STANDARD	On	1000Mbps
	Off	100Mbps
6b OPTICAL ISOLATED	On	1000Mbps
	Off	100Mbps

What does the Network Connection Status LED on the SILENTPOWER LAN IPURIFIER PRO show?

The LED shows the current network transfer status of the SILENTPOWER LAN IPURIFIER PRO.

	LED	Speed
7a STANDARD	Orange	No Data
	Flashing	Data
	Off	No Connection
7b OPTICAL ISOLATED	Orange	No Data
	Flashing	Data
	Off	No Connection

What does the Optical Connection Status LED on the SILENTPOWER LAN IPURIFIER PRO show?

The LED shows the current optical isolation status of the SILENTPOWER LAN IPURIFIER PRO.

LED	Status
On	No Data
Flashing	Data
Off	No Connection

What cautions should be observed when using the SILENTPOWER LAN IPURIFIER PRO?

1. Avoid extreme heat, cold and humidity.

2. Avoid dropping or crushing the SILENTPOWER LAN IPURIFIER PRO.

What should I know about prolonged heat exposure for the SILENTPOWER LAN IPURIFIER PRO?

Your SILENTPOWER LAN IPURIFIER PRO may become very warm during normal use. This is normal and nothing to worry about. Also, it is very important to keep it in a well-ventilated environment.