SHARP 65FP7EA (01) PDF Document

The supply of the SHARP 65FP7EA TV includes the following parts:

• 1x TV

• 1x Remote control

• 2x AAA batteries

• 1x TV stand installation packet

• 1x Quick Start Guide

To assemble the base stand to the SHARP 65FP7EA, you will need a cross head screwdriver. To avoid damage to the TV screen during assembly, ensure the TV is placed on a soft, flat surface with the LCD screen facing downwards. The assembly requires 6 screws, which are included in the stand installation packet.

1. If rubber parts, foam parts or tape are attached to the TV frame, please remove them gently.

2. Using the antenna cable (not supplied), connect the TV to the antenna wall socket.

3. For connecting to the Internet with a wired connection, connect a Cat 5/Ethernet cable (not included) from the TV to your broadband modem/router.

4. Insert the supplied batteries into the Remote control.

5. Connect the power cable to the Electrical outlet.

6. Then press the Standby button to power on the TV.

7. After turning the TV on, you will be welcomed by the First Time Installation menu.

8. Please select a language for the TV menu.

9. Please set desired settings in the remaining screens of the First installation menu.

The On/Off button is located on the bottom side of the LED light. Press this button to switch on/off the TV.

Alternatively, you can use the standby button on the remote control to switch the TV on when in standby or vice versa. By long-pressing this button, the set will display a menu offering a power-down option to enter an energy-saving standby mode.

To switch between the different input/connections using the buttons on the remote control:

1. Press [SOURCE] – The source menu will appear.

2. Press [▲] or [▼] to select the input you require.

3. Press [OK].

Use the (▲/▼/◄/►) remote control buttons to focus on the desired item.

Press the OK button to select the item currently in focus.

Press the BACK button to go back one step in the menu.

Press the EXIT button to leave the menu.

Press the (home) button to enter the TV Home menu.

To enter the Live TV menu, press the TV button and then press the MENU button.

• 1. Standby – Switch on the TV when in standby or vice versa. By long pressing this button, the set will display a menu offering a power down option to energy saving standby mode.

• 2. SOURCE – Displays the input/source menu.

• 3. NUMBER BUTTONS – 0-9 to select a TV channel directly.

• 4. Mute – Mutes the sound or vice versa.

• 5. GUIDE – Opens the 7 day TV guide (digital TV mode).

• 6. MENU – Displays LIVE TV menu. This button works only in sources (TV, HDMI, Component, etc.). It will not work in the Home Menu.

• 7. Google Assistant – Use your voice to access entertainment, control smart devices, obtain answers on screen, and more.

• 8. INFO – Press once to view information about the programme you are currently watching. Press again to view detailed information. Press ► while the information panel is displayed to view information about the upcoming programme.

• 9. ▲/▼/◄/►/OK – Allows you to navigate the on-screen menus and adjust the system settings to your preference.

• 10. BACK – Step back in the menu.

• 11. Home – Displays the TV’s Home Menu.

• 12. EXIT – Exits all menus.

• 13. VOL (+/-) – Tilt to increase/decrease the sound level.

• 14. CH (+/-) – Tilt to switch to the next/previous channel in the sequence.

• 15. NETFLIX – Access the Netflix App.

• 16. Prime video – Access the Prime video App.

• 17. YouTube – Access the YouTube App.

• 18. Freeview Play – Access the Freeview Play service. Only available in the UK.

• 19. AUDIO – Opens audio track menu.

• 20. SUB – Turns on/off subtitles at the bottom of the screen.

• 21. TEXT – Turns teletext on/off.

• 22. TV – Switches the TV to the last watched input.

• 23. ►|| – Play/pause media.

• 24. ◄◄ – Play in fast rewind mode.

• 25. ►► – Play in fast forward mode.

• 26. ■ – Stop playback.

• 27. COLOUR BUTTONS – Execute corresponding function at that time.

The SHARP 65FP7EA TV supports playback of a wide variety of file types from a USB drive. However, for data security reasons, Google limits the supported file system types. To playback any media from a USB storage drive, the USB drive must be formatted to a FAT16 or FAT32 file system. NTFS is not supported.

The extended use of fixed image program material can cause a permanent “shadow image” on the LCD screen (this is sometimes incorrectly referred to as “burnout to the screen”). This shadow image is then permanently visible on the screen in the background and is irreversible damage. You can avoid such damage by following the instructions below:

• Reduce the brightness/contrast setting to a minimum viewing level.

• Do not display the fixed image for a long period of time. Avoid displaying:

>> Teletext time and charts,

>> TV/DVD menu, e.g. DVD contents,

>> In the “Pause” mode (hold): Do not use this mode for a long time, e.g. while watching a DVD or a video.

• Turn off the appliance if you are not using it.

Please read these safety instructions and respect the following warnings before the appliance is operated:

• In order to prevent fire, always keep candles and other open flames away from this product.

• This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

• Television sets with 43″ size screens or more must be lifted and carried by at least two people.

• Do not remove the rear part of the appliance.

• This appliance is designed for the receiving and reproduction of video and sound signals. Any other use is strictly forbidden.

• Do not expose the TV to dripping or splashing liquid.

• To disconnect the TV from mains please unplug the mains plug from the mains socket.

• The suggested distance to watch HD TV is approximately three times longer than the screen diagonal size.

• Ensure the TV has sufficient ventilation and is not close to other appliances and other pieces of furniture.

• Install the product at least 5 cm from the wall for ventilation.

• Ensure that the ventilation openings are clear of items such as newspapers, table-cloths, curtains, etc.

• The TV set is designed to be used in a moderate climate and exclusively for operation in a dry place.

• Do not place any objects, containers filled with liquids, such as vases, on the TV.

• Place the TV exclusively on flat and stable surfaces.

• Make sure the appliance does not stand on any power cables as they might get damaged.

• Do not place the appliance near heating elements or in a place with direct sunlight as it has a negative effect on cooling.

• To clean the screen of the appliance use only a damp and soft cloth. Use only clean water, never detergents and in no case use solvents.

• Position the TV close to the wall to avoid the possibility of it falling when pushed.

• WARNING – Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death.

• When turning off the set, use the standby button on the remote control. By long pressing of this button, TV will turn off and enter the energy saving standby mode to meet the eco-design requirements. This mode is default one.

• For the electrostatic discharge (ESD) test of EN55035, it was found that manual operation by Standby button ON/OFF switch is needed to resume normal operation as intended after the test.

• Do not use TV set directly after unpacking. Wait until TV warms up to the room temperature before using it.

• Never connect any external devices to a live appliance. Switch off not only the TV but also the devices which are being connected! Plug the TV plug into the wall socket after connecting any external devices and the aerial!

• Always make sure there is free access to the TV mains plug.

• The appliance is not designed for a use in a workplace fitted with monitors.

• The systematic use of headphones at high volume might lead to irreversible hearing damage.

• Ensure environmental disposal of this appliance and any components including batteries.

• While installing the appliance, do not forget that furniture surfaces are treated with various varnishes, plastics, etc. or they might be polished. The chemicals contained in these products might have a reaction with the TV stand. This could result in bits of the material sticking to the furniture surface, which are difficult to remove, if not impossible.

• The screen of your TV has been produced under top quality conditions and was checked in detail for faulty pixels several times. Due to the technological properties of the manufacturing process, it is not possible to eliminate the existence of a small number of faulty points on the screen (even with maximum care while in production). These faulty pixels are not considered faults in terms of guarantee conditions, if their extent is not greater than the boundaries defined by DIN norm.

• CAUTION: Risk of explosion if the battery is replaced by an incorrect type.

• Observe the correct polarity when inserting the batteries.

• Do not expose batteries to high temperatures and do not place them on locations where the temperature might increase quickly, e.g. near the fire or on the direct sunshine.

• Do not expose batteries to excessive radiant heat, do not throw them into the fire, do not disassemble them and do not try to recharge un-rechargeable batteries. They could leak or explode.

• Never use different batteries together or mix new and old ones.

• Dispose of batteries in an environmentally friendly way.