Free English RUSSELL HOBBS 27360-70 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD RUSSELL HOBBS 27360-70 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the parts of the RUSSELL HOBBS 27360-70?
The parts of the RUSSELL HOBBS 27360-70 are:
1. Filter
2. Lid
3. Lid release
4. Switch
5. Stand
To prepare the RUSSELL HOBBS 27360-70 for first use, fill it to max, boil the water, discard the water, and then rinse. Repeat this process twice to remove any manufacturing dust, etc.
How do I fill the RUSSELL HOBBS 27360-70?
To fill the RUSSELL HOBBS 27360-70:
1. Open the lid.
2. Fill with at least 1 cup of water, but not above max.
3. Close the lid, and press down to lock it.
How do I switch on the RUSSELL HOBBS 27360-70?
To switch on the RUSSELL HOBBS 27360-70:
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to I.
5. The light will come on. The kettle will start to heat.
How do I switch off the RUSSELL HOBBS 27360-70?
To switch off the RUSSELL HOBBS 27360-70:
1. When the water boils the kettle will switch off.
2. To switch off manually, move the switch to O, or simply lift the kettle off the stand.
What should I do if I see moisture on the stand of my RUSSELL HOBBS 27360-70 when lifting the kettle?
When you lift the RUSSELL HOBBS 27360-70 kettle, you may see moisture on the stand. This is the steam used to switch off automatically, which then condenses and escapes via vents under the kettle. Do not worry.
What should I do if I see some discolouration on the floor of my RUSSELL HOBBS 27360-70 kettle?
If you see some discolouration on the floor of the RUSSELL HOBBS 27360-70 kettle, do not worry. This is due to the bonding of the element to the kettle floor.
What happens if my RUSSELL HOBBS 27360-70 kettle boils dry?
If your RUSSELL HOBBS 27360-70 kettle boils dry, a safety cut-out device will automatically switch it off. If this happens, unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle to boil dry will shorten the life of the element.
How should I clean and maintain my RUSSELL HOBBS 27360-70 kettle?
To care for and maintain the RUSSELL HOBBS 27360-70:
1. Unplug the stand, and let the kettle cool before cleaning.
2. Wipe all surfaces with a clean damp cloth.
3. Keep the connectors dry.
4. Open the lid.
5. Push the hook on top of the filter down then lift the filter out of the kettle (figure A).
6. Rinse the filter under a running tap while brushing with a soft brush.
7. Lower the filter into the kettle, and engage the bottom hook in the bottom of the spout.
8. Press the top of the filter towards the kettle, to lock the hook in place.
9. Close the lid.
How often should I descale my RUSSELL HOBBS 27360-70 kettle?
You should descale the RUSSELL HOBBS 27360-70 regularly, at least monthly. Use a proprietary descaler and follow the instructions accompanying the descaler.