Free English RTS 4030 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD RTS 4030 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is the intended use of the RTS 4030?
The RTS 4030 is a portable user station designed for use with RTS/Telex two-wire or 4010 IFB intercom systems. It functions as a listen-only IFB belt pack that can be used to listen to one or two intercom or program channels.
What are the main features of the RTS 4030?
The main features of the RTS 4030 are:
• Powered externally, via the intercom system power supply on channel one.
• Power ON indicator.
• Headset/Earset jack set for a wide range of operations.
• Monaural phone jack for intercom channel one.
What items should be included in the package for the RTS 4030?
| Qty | Description | Part Number |
|---|---|---|
| 1 | IFB4030 Assembly or IFB4030-M | 90107489000 or 90107488001 |
| 1 | Operation Manual | 93507489000 |
| 1 | User Instructions, 4030-M | 90507489001 |
| 1 | Warranty | 38110387 |
| 1 | Certificate of Conformity | 38109675 |
How do I operate the external connections and controls on the RTS 4030?
The external connections and controls on the RTS 4030 have the following functions:
1. Channel 1 Volume Control (NON-INTERRUPT): Use this control to adjust the headset/earset listen level for channel 1.
2. ON LED Indicator: This LED glows green when the beltpack is connected to a functioning intercom channel.
3. Channel 2 Volume Control (INTERRUPT): Use this control to adjust the headset/earset listen level for channel 2.
4. Mono Headset Connector (HEADSET): This connector accepts a wide-response headset/earset, such as the RTS/Telex Model 2233 or Model 2234, with a 1/4″ monaural phone plug.
5. Stereo Headset Connector (STEREO): This connector accepts a wide-response headset/earset, such as the RTS/Telex Model 2233 or Model 2234, with a 1/4″ stereo phone plug.
6. Intercom Channel Connectors (LINE): The RTS 4030 intercom channel is connected via a 3-pin female connector. The device is powered from the intercom system power supply and will turn ON with the intercom system.
What are the power requirements for the RTS 4030?
The RTS 4030 requires 32 VDC nominal (standard RTS line), with a maximum of 150mA.
What are the environmental operating and storage requirements for the RTS 4030?
| Storage | -20°C to 80°C, 0% – 95% humidity, non-condensing |
| Operating | 0°C to 50°C, 0% – 95% humidity, non-condensing |
What are the physical dimensions of the RTS 4030?
The physical dimensions and weight of the RTS 4030 are:
Physical: 3.65″ (92.77mm) L x 3.75″ (95.3mm) W x 1.5″ (38mm) D
Weight: 10.8 oz. (303g)
What are the interface and audio input requirements for the RTS 4030?
Earset/Headphone compatibility: Accepts 50 to 600 ohm earsets or headphones.
Audio input requirements:
Input Level: 2V p-p (0dBu) nominal
Input Impedance: 200 ohms ±5%
Noise Contribution: Less than -60dB nominal.
What are the headphone amplifier specifications for the RTS 4030?
Voltage Gain: 27±3dB from intercom channel to earset
Maximum Output: 65 mW into 150 ohms
Frequency Response: 250Hz to 8kHz +1/-4dB
What is the pin configuration for the connectors on the RTS 4030?
Headset Connectors
Type: 1/4″ Monaural Plug
| Tip | Headset Audio High |
| Sleeve | Headset Audio Low |
Type: 1/4″ Stereo Plug
| Tip | Headset Channel 1 Audio High |
| Ring | Headset Channel 2 Audio High |
| Sleeve | Headset Audio Low |
Audio/Power Connector
Type: XLR-3F
| Pin 1 | Common |
| Pin 2 | Channel 1 audio and power input |
| Pin 3 | Channel 2 audio |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD RTS 4030 (01) PDF DOCUMENT