ROLAND CB-HPD (01) PDF Document

1. Remove the mounting plate from the bottom of the device. After removing the screws, reinstall them in the bottom of the device.

2. Place the device (such as the HandSonic HPD-20 or SPD-SX) in the carrying bag as shown in the illustration, with the striking surface facing upward, and secure it with the belt.

3. Store the AC adapter and cables etc. in the pocket.

4. Store the stand and mounting plate in the included stand case. Attach the mounting plate to the stand as shown in the illustration.

WARNING: Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.

CAUTION: Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well as to domestic animals or pets.

The triangle symbol alerts the user to important instructions or warnings. The specific meaning of the symbol is determined by the design contained within the triangle. For example, a triangle with an exclamation mark is used for general cautions, warnings, or alerts to danger.

The circle with a line through it symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. For example, a circle with a line through a disassembled unit means that the unit must never be disassembled.

The solid circle symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. For example, a solid circle with a power plug means that the power-cord plug must be unplugged from the outlet.

Do not disassemble or modify by yourself
Do not carry out anything unless you are instructed to do so in the owner’s manual.

Be cautious to protect children from injury
Always make sure that an adult is on hand to provide supervision and guidance when using the product in places where children are present, or when a child will be using the product.

Do not drop or subject to strong impact
Otherwise, you risk causing damage or malfunction.

Do not use or store the ROLAND CB-HPD in the following types of locations:

• Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are

• Damp (e.g., baths, washrooms, on wet floors); or are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and shakiness.

Do not expose the product to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the product.

For everyday cleaning wipe the product with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the product thoroughly with a soft, dry cloth.

Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.