Free English RENPHO RF-ALM070 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD RENPHO RF-ALM070 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is included in the box with the RENPHO RF-ALM070 Leg Massager?
The RENPHO RF-ALM070 Leg Massager package contains the following items:
• 1 x Pair of calf & foot wraps
• 1 x Pair of thigh wraps
• 1 x Handheld controller
• 1 x Power adapter
• 1 x User manual
Who should consult a doctor before using the RENPHO RF-ALM070 Leg Massager?
If any of the following conditions apply to you, please consult a doctor before using the RENPHO RF-ALM070 Leg Massager:
• Pregnant women, children, or the elderly.
• People who suffer from skin infections or have redness and burns on the skin.
• People who use a pacemaker or similar implantable medical device.
• Patients with heart disease or malignant tumors.
• People who are receiving medical treatment or feel discomfort.
• People suffering from osteoporosis.
• People with high blood pressure or abnormal blood pressure.
This product is designed for personal and non-professional use only and should not be used for any medical purposes.
How do I properly wear and set up the RENPHO RF-ALM070 leg wraps?
For proper setup and use of your RENPHO RF-ALM070, please follow these tips:
1. Match Left and Right Wraps: Ensure you use the corresponding wraps for your left and right legs. There is a round sticker on the hose interface marked “R” for Right and “L” for Left. Match the hose to the correct leg wrap.
2. Position Thigh Wraps Correctly: The thigh wraps have marks indicating which side is “Up”. Ensure they are oriented correctly on your thighs.
3. Secure Hoses: Make sure all hoses are securely attached and color-matched to the corresponding wraps.
4. Adjust Hose Length: The length of the air hose can be adjusted by moving the position of the plastic rings.
What should I do if the massage from the RENPHO RF-ALM070 feels too intense or uncomfortable?
If you feel the massage is too powerful or uncomfortable, you can try the following solutions:
• Choose the lowest intensity setting on the controller.
• Loosen the Velcro of the corresponding leg wrap part.
• Press the POWER button to turn the massager off immediately.
• It is recommended to leave enough space to fit 4 fingers under the wrap to prevent the massage from being too powerful.
How do I operate the handheld controller for the RENPHO RF-ALM070 Leg Massager?
The handheld controller has several buttons to customize your massage:
• Power Button: Press the power icon button to turn the massager on or off. The default setting upon turning on is combine massage mode 1 with air intensity level 2.
• Combine Massage Mode Button (“C”): Press to cycle through the 3 combine massage modes.
• Separate Massage Mode Button (“S”): Press to select massaging the thigh, calf, and foot separately.
• Air Intensity Button (“-+”): Press to reduce (-) or enhance (+) the massage intensity. There are 4 intensity levels available.
It is normal for the handheld controller to experience a slight temperature rise during use.
What are the different massage modes available on the RENPHO RF-ALM070?
The RENPHO RF-ALM070 offers two types of massage modes: Combine Modes and Separate Modes.
Combine Massage Modes (Press “C” button):
• Combine 1: Massages the full legs (feet, calves, and thighs).
• Combine 2: Massages the feet and calves.
• Combine 3: Massages the feet, calves, and thighs in sequence.
Separate Massage Modes (Press “S” button):
• T: Massages thighs only.
• C: Massages calves only.
• F: Massages feet only.
Does the RENPHO RF-ALM070 have an auto shut-off or memory feature?
Yes, the RENPHO RF-ALM070 has both features.
• Auto Shut-Off: The massager will automatically shut off after 20 minutes of use for safety. Before shutting off, the indicator light for the current mode will blink red. You can press the power button to restart the massage session.
• Memory Function: If the power is not cut off, the massager will remember the last used mode and intensity level and will automatically start with those settings when you power it on again.
Can I use the RENPHO RF-ALM070 to massage only one leg?
Yes, you can choose to massage only one leg at a time with the RENPHO RF-ALM070. To do this, ensure that all hoses are connected to both boots and that the colors match correctly. Then, only wear the wrap on the leg you wish to massage.
How should I clean and store the RENPHO RF-ALM070 Leg Massager?
Cleaning Method:
Do not wash or machine wash the leg wraps. It is recommended to wipe the massager with a soft, damp, or dry cloth.
Packing Method:
When packing for storage, avoid folding the air tubes, as this may cause inflation failure.
How can I troubleshoot common issues with my RENPHO RF-ALM070 Leg Massager?
If you encounter issues with your RENPHO RF-ALM070 Leg Massager, refer to the table below for potential causes and solutions.
| PROBLEM | CAUSE | SOLUTION |
|---|---|---|
| The product does not work | The power is not connected or the plug is loose | Plug in the power cord correctly. The indicator light will be red after you press the power button. |
| The power switch is not on or auto-shut-off timer turns it off | Turn on the power switch or press it again if the timer has turned it off. | |
| Some part can’t inflate | The color of hose doesn’t match | Please follow the instructions on matching and connecting the air hose for the Left and Right legs. |
| The current massage mode excludes massage this part | Please choose the corresponding mode that includes the desired body part. | |
| The tube has not been attached securely, and there is air leaks | Please check again if hose attached securely with boots (no gap between hose interface and boot). | |
| The tube has been folded | Please avoid folding the tube when packing. | |
| Feel powerful or uncomfortable | Wrap your legs too tight or using the highest intensity | 1. Choose the lowest intensity. 2. Open the Velcro of the corresponding part. 3. Press POWER button to turn off. |
| The product suddenly stops working | The massager’s over-heat protection feature will switch off the massager automatically when too hot | Wait for the massager to cool down before powering it back on. |
| 20 minutes timer turns it off | Press the power button again. | |
| The handheld controller gets hot | The product has been used continuously for a long time. (A temperature rise of the handheld controller ≤59°F is normal.) | It is recommended to use for 20 to 30 minutes to avoid overuse. After turning off, allow the massager to cool down before using again. |
| Feel the difference of intensity when massaging two legs at the same time | Some tube has not been attached securely or the wrong hose is attached | Please make sure the tube is attached securely. |
| When wearing the boots, the gap you leave may be different | Please leave the same gap under the wraps on both legs when you wear them. |
What are the technical specifications of the RENPHO RF-ALM070 Leg Massager?
• Product Name: Renpho Leg Massager
• Input: 12 V === 0.6 A
• Rated Power: 7.2 W
• Power Source: 100-240VAC
• Timer: 20 minutes
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD RENPHO RF-ALM070 (01) PDF DOCUMENT