PROFICIENT AUDIO SYSTEMS AW525WHT (01) PDF Document

To wire your PROFICIENT AUDIO SYSTEMS AW525WHT speakers, attach the speaker cable to the speaker cable terminals on the rear panel. When connecting to your amplifier, observe the proper polarity: connect the + terminal on the amplifier to the + (red) terminal on the speaker, and the – terminal on the amplifier to the – (black) terminal on the speaker.

Ensure you connect the right channel from your amplifier to the right speaker and the left channel to the left speaker.

Placement Under Eaves and Outdoors

When mounting your speakers outdoors, the eaves of the roof provide an ideal location. They reduce the exposure of constant direct sunlight, salt spray, and precipitation. If installing speakers on a boat, the wheelhouse provides the best location for the same reasons. Following these suggestions will help to ensure that your speakers will last a lifetime.

Placement on a Wall or BookShelf

When placing your speakers on a wall or bookshelf, optimal sound will be achieved if they are mounted at ear level or slightly higher. The usual listening area should be no closer to the speakers than the distance between the speakers themselves.

Please follow these steps to install the mounting bracket:

1. Screw the mounting bracket to the wall. The bracket can be installed either horizontally or vertically.

2. Secure the speaker to the mounting bracket by tightening the knobs on the side of the speaker.

Depending upon your listening area, you may find the sound more pleasing by pointing the tweeters in a particular direction. To adjust the tweeter, push gently at its edge to point it in the desired direction.

• If additional treble is desired, simply point the tweeter towards your listening area.

• If less treble is required, point the tweeter away from your listening area.

Features and specifications are subject to change without notice.