PIONEER VSX-52TX (01) PDF MANUAL

Use the MULTI JOG dial to select various settings and menu options.

Switches the receiver between on and standby using the STANDBY/ON button.

Use the MULTI JOG dial to select the various listening modes by pressing the LISTENING MODE SELECT button.

Character display.

DISC (ENTER) can be used to enter commands for TV or DTV, and can also be used to select a disc in a multi-CD player.

Receives the signals from the remote control.

Lights when Acoustic Calibration EQ is on (Acoustic Calibration EQ is automatically set to ALL CH ADJUST after the Auto MCACC Setup or EQ Auto Setting is complete).

Press Input select buttons to select an input source.

Dial to adjust master volume.

TUNER EDIT: Use with the MULTI JOG dial to memorize and name stations for recall.

TUNING/STATION: Use with the MULTI JOG dial to select station presets and radio frequencies.

BAND: Switches between AM and FM radio bands.

MPX: Press to receive a radio broadcast in mono.

Use Midnight when listening to movie soundtracks at low volume. Use Loudness to boost the bass and treble at low volume.

When the STEREO mode is selected, press this button to access the bass and treble controls, which you can then adjust with the MULTI JOG dial.

Press to select an Acoustic Calibration EQ setting.

Use to make dialog stand out when watching TV or a movie.

Press to select the component connected to the MULTI CH IN terminals (for example, a DVD-Audio player).

Use to select an input signal.

Selects the surround back channel mode or virtual surround back mode.

Use to change the speaker system.

This is a port.

Use to connect the supplied microphone.

If you’ve made multi-room connections use these controls to control the sub room from the main room.

SYSTEM SETUP: Use with the MULTI JOG dial to access the System Setup menu.

RETURN: Press to confirm and exit the current menu screen.

Use to connect headphones. When the headphones are connected, there is no sound output from the speakers.

Use to select the input source.

Press to select control of other components.

・ V+12A

・ V-12A

・RMC

・SROUT

・SRIN

・GND

・TRXD

・RXD

・BUSY

Attenuates (lowers) the level of an analog input signal to prevent distortion.

Dims or brightens the display.

Switches the SR+ mode on/off.

Use to set the listening volume.