Free English PHILIPS 50PUS8808 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PHILIPS 50PUS8808 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I access the Dashboard on the PHILIPS 50PUS8808?
The Dashboard is a side panel in Google TV that provides access to Settings, device controls, notifications, and more. It can be accessed in the following ways:
1. Navigate to the profile icon in the upper right of the home screen.
2. Press the DASHBOARD key (gear icon) on the remote control.
3. Long press the HOME key on the remote control.
What are the wall mount specifications for the PHILIPS 50PUS8808?
The PHILIPS 50PUS8808 is prepared for a wall mount bracket (sold separately). The required wall mount dimensions are:
VESA 200×300, M6 (min.: 10 mm, max.: 16 mm).
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TV’s weight.
How do I pair the remote control to the PHILIPS 50PUS8808?
This remote control uses both Bluetooth and IR (infrared) to send its commands to the TV. To use advanced operations like voice search, you need to pair (link) the TV with the remote control.
When you start the initial TV installation, the TV invites you to press the Home + Back key to pair the remote control. It is suggested to complete the pairing during the first TV installation.
If the pairing with the remote control was lost, you can pair the TV with the remote control again:
1. Press the Home + Back key or long press the PAIR (SOURCES) key (approximate for 3 seconds) for pairing.
2. Alternatively, go to Settings > Remote & accessories > Remote control settings > Pair remote control, then follow the on-screen instructions.
A message appears when the pairing is successful.
How do I use Voice Search on the PHILIPS 50PUS8808?
You can search for videos, music, or anything else on the Internet by using your voice. You need to pair the remote control to the TV before using voice search.
1. Press and hold the Voice key (Google Assistant icon) on the remote control. The blue light on the remote control lights up and the search field opens, indicating the microphone is active.
2. Speak out what you are looking for with clear pronunciation.
3. Once the voice input is done, release the Voice key to start the search.
How do I replace the batteries in the PHILIPS 50PUS8808 remote control?
If the TV does not react on a key press on the remote control, the batteries might be empty.
1. Slide the battery door in the direction shown by the arrow on the back of the remote control.
2. Replace the old batteries with new batteries. Make sure the + and – ends of the batteries line up correctly.
3. Reposition the battery door and slide it back until it clicks.
Remove the batteries if you are not using the remote control for a long time. Safely dispose of your old batteries according to the end of use directions.
How do I switch the PHILIPS 50PUS8808 on, to standby, or off completely?
Switch on: Press the Power button on the remote control or the small joystick key on the bottom of the TV.
Switch to standby: Press the Power button on the remote control. You can also press the small joystick key on the bottom of the TV, select the Power icon, and press the joystick key.
Reboot: Long press the Power button on the remote control for three seconds to reboot the TV.
Switch off completely: Disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord.
How do I install satellite channels on the PHILIPS 50PUS8808?
1. Select Settings > Channels & Inputs > Channels > Satellite Installation and press OK. Enter your PIN code if necessary.
2. Select Search for Satellite and press OK.
3. Select Search and press OK. The TV will search for satellites.
4. Select Install and press OK. The TV shows the current satellite installation setup.
5. If you want to change the setup (e.g., number of satellites or Unicable), select Settings. Otherwise, select Search.
6. The TV will search for the satellites available on the alignment of your antenna dish.
7. When the TV finds the satellites you need, select Install.
8. If a satellite offers Channel Packages, select the package you need.
9. To store the satellite setup and installed channels, select Finish.
How do I install antenna or cable channels on the PHILIPS 50PUS8808?
1. Select Settings > Channels & Inputs > Channels > Antenna/Cable Installation or Antenna Installation and press OK.
2. Enter your PIN code if necessary.
3. Select Search for Channels and press OK.
4. Select Start and press OK.
5. Select Update Digital Channels, select Next and press OK.
6. Select Start and press OK to update the digital channels. This can take a few minutes.
7. Press the Left arrow to go back one step or press Back to close the menu.
How can I create a Favourite Channel List on the PHILIPS 50PUS8808?
1. Press the TV button to switch to TV.
2. Press OK to open the current channel list.
3. Press OPTIONS.
4. Select Create Favourites List and press OK.
5. In the list at the left, select a channel you want as a favourite and press OK. Channels come in the list at the right in the order you add them.
6. To finish adding channels, press Back.
7. The TV will ask to rename the Favourites List. You can use the on-screen keyboard.
How do I enable HbbTV on the PHILIPS 50PUS8808?
If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages.
Go to Settings > Channels & Inputs > Channels > HbbTV and Operator Apps settings > HbbTV > On.
How do I connect the PHILIPS 50PUS8808 to the Internet via Wi-Fi?
1. Go to Settings > Network & Internet > Wi-Fi > On/Off and ensure it is On.
2. In the list of found networks, select on your wireless network.
3. If your network is not in the list because the network name is hidden, select Add New Network to enter the network name yourself.
4. Enter your encryption key (WPA2 or WPA3) using the on-screen keyboard.
5. A message will be shown when the connection is successful.
How do I connect a Bluetooth device to the PHILIPS 50PUS8808?
1. Switch on the Bluetooth device and place it within 5 meters of the TV.
2. Select Settings > Remote & accessories > Pair accessory.
3. Select Search and press OK. Follow the instructions on screen.
4. You will pair the device with the TV and the TV will store the connection. You might need to unpair a paired device first if the maximum number of paired devices was reached.
How do I adjust the picture style on the PHILIPS 50PUS8808?
1. Go to Settings > Display & Sound > Picture > Picture style.
2. Alternately, select from the Dashboard > Picture > Picture style.
3. Select a style such as Personal, Crystal Clear, Home Cinema, ECO, Movie, Game, or Monitor.
Note: HDR and Dolby Vision signals offer specific picture styles such as HDR Personal, Dolby Vision Bright, etc.
How do I turn on Ambilight on the PHILIPS 50PUS8808?
Press the AMBILIGHT button on the remote control to turn on, or you can turn on by selecting Settings > Display & Sound > Ambilight > Ambilight style > Enable.
To switch off Ambilight, press the AMBILIGHT button, then press OK on the Enable option to switch on or off.
How do I reset the PHILIPS 50PUS8808 to factory settings?
You can redo a full TV installation. The TV is completely reinstalled.
1. Select Settings > System > About > Reset > Factory reset and press OK.
2. Enter your PIN code if necessary.
3. The TV will reinstall completely. All settings will be reset and installed channels will be replaced. The installation can take a few minutes.
How do I use the “Quick Menu” on the PHILIPS 50PUS8808?
In the Quick Menu and Frequent settings, you will find a quick way to access TV functions or setting menus.
1. Press the Quick Menu / MENU key on the remote control to open Quick Menu.
2. Press the arrows Left or Right to switch between Quick Menu and Frequent settings.
3. Select an item and press OK to open or start it.
How do I clean the screen of the PHILIPS 50PUS8808?
Never touch, push, rub or strike the screen with any object.
Unplug the TV before cleaning.
Clean the TV and frame with a soft damp cloth and wipe gently. Avoid touching the Ambilight LEDs on the backside of the TV. Never use substances such as alcohol, chemicals or household cleaners on the TV.
To avoid deformations and colour fading, wipe off water drops as quickly as possible.
Avoid stationary images as much as possible.
What should I do if the PHILIPS 50PUS8808 does not switch on?
Disconnect the power cable from the power outlet. Wait for one minute then reconnect it.
Make sure that the power cable is securely connected.
What should I do if the remote control for the PHILIPS 50PUS8808 is unresponsive?
The TV requires some time to start up. During this time, the TV does not respond to the remote control or TV controls. This is normal behaviour.
If the TV continues to be unresponsive, check if the remote control is working by using a mobile phone camera. Point the remote at the camera lens and press a key. If you see the infra-red LED flicker on the camera screen, the remote is working and the TV needs to be checked.
If you do not notice flickering, the remote control might be broken or batteries are low.
Note: This test is not possible with wirelessly paired remote controls.
What should I do if there is no picture or distorted picture on the PHILIPS 50PUS8808?
Make sure that the antenna is properly connected to the TV.
Make sure that the correct device is selected as the display source.
Make sure that the external device or source is properly connected.
What should I do if the Wi-Fi network is not found or distorted on the PHILIPS 50PUS8808?
Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n/ac devices in your proximity might disturb the wireless network.
Make sure that the firewalls in your network allow access to the TV’s wireless connection.
If the wireless network does not work properly in your home, try the wired network installation.
CLICK HERE TO DOWNLOAD PHILIPS 50PUS8808 (01) PDF DOCUMENT