Free English PANASONIC KX-HNB600 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PANASONIC KX-HNB600 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I perform the initial setup for the PANASONIC KX-HNB600?
Step 1. Plug in the PANASONIC KX-HNB600, then wait for the LED indicator on the hub to stop blinking and stay lit in yellow.
Step 2. Download the Home Network app, then tap its icon to start the app.
Step 3. Tap [Set up the Hub].
Step 4. When prompted, press the [Wi-Fi SETUP] button on the PANASONIC KX-HNB600. The LED indicator on the hub will begin blinking in yellow.
Step 5. For iPhone/iPad users, press the home button on your mobile device to close the Home Network app. Change your mobile device’s Wi-Fi setting by opening the [Settings] app, tap [Wi-Fi], select “KX-HNB600_Panasonic”, enter “00000000” as the password, and then tap [Join]. Start the Home Network app again. Android users can skip this step.
Step 6. If prompted, enter the password for your wireless router and then tap [Next].
Step 7. When prompted, press the [Wi-Fi SETUP] button on the PANASONIC KX-HNB600.
Step 8. Follow the on-screen instructions and set the remote login password. This password is used to access the system when you are away from home.
Step 9. Follow the on-screen instructions and complete the setup. The app’s home screen is displayed.
Step 10. Enjoy your PANASONIC KX-HNB600.
What are the requirements for the initial setup of the PANASONIC KX-HNB600?
Ensure your mobile device is compatible with the app. Compatible devices include iPhone 4 and later, iPad (iOS 6.0 and later), and Android smartphones and tablets (Android 4.0 and later). Make sure the PANASONIC KX-HNB600 and your wireless router are turned on. Your mobile device’s Wi-Fi feature must be turned on and connected to your wireless router. Before performing the initial setup, make sure your mobile device is connected to the wireless router using the SSID that is assigned to the 2.4 GHz band of your wireless router. When prompted to enter your wireless router’s password, enter the password assigned to the 2.4 GHz band.
What should I do if I cannot complete the initial setup of the PANASONIC KX-HNB600?
If your mobile device can connect to other nearby wireless routers, we recommend you turn them off or “forget” their settings while setting up the PANASONIC KX-HNB600. If your mobile device connects to a different wireless router during the setup procedure, initial setup may not be able to be completed. Ensure you know your wireless router’s password and that you have entered it properly. If you continue to have trouble, you may be able to configure the PANASONIC KX-HNB600 Wi-Fi settings using the WPS feature of your wireless router.
Why can I not access the PANASONIC KX-HNB600 system while away from home?
Make sure your mobile device’s connection to the Internet (via 4G, 3G, Wi-Fi, etc.) has a strong signal. Also, make sure your wireless router is allowing access from devices outside the network. If your wireless router supports UPnP, make sure the feature is turned on.
CLICK HERE TO DOWNLOAD PANASONIC KX-HNB600 (01) PDF DOCUMENT