PACKARD BELL PB1009X (01) PDF Document

Connect the tablet to a wall outlet using the included power adapter. When charging, the lightning indicator will appear in the battery icon.

Turn off Wi-Fi when it’s not in use.

Lock the tablet (turning the display off) to shorten charging time.

To optimize battery time and performance, adjust the “Brightness” and “Screen timeout” options in the Settings panel.

It is recommended to keep the brightness level at 50% or under if the tablet is in use while charging.

Turning on the tablet: Press and hold the Power button until the startup screen appears.

Power off the tablet: Press and hold the Power button until the “Power off” option appears.

Lock the tablet (standby): Briefly press the Power button to lock the tablet and conserve the battery.

Unlock the tablet: Briefly press the Power button, and slide the “Lock icon” up.

If the tablet malfunctions or freezes, you can use the reset button to restart it.

To reset the tablet, take a metal pin (such as the end of a paper clip) and gently push the recessed reset button on the side of the tablet. The tablet will restart.

To install a Micro SD card into the tablet, carefully insert the card into the card slot until it clicks and locks into place.

To remove the Micro SD card, gently press it inward to eject.

Note: The tablet supports Micro SD cards up to 64GB (not included).

1. Press and hold the Power button to get started.

2. Follow the initial setup wizard prompts.

3. To use the Google Play store, sign into or create a Google account.

To add a widget, press and hold anywhere on the home screen, and select the “Widgets” option. Press and hold widgets to place them on the home screen.

Notifications panel: Swipe down from the top edge of the screen to display the Notifications panel where you can browse and reply to your emails, check software updates, reminders, and more.

Quick Settings panel: Swipe down twice from the top edge of the screen to expand and access the Quick Settings panel, where you can easily enable/disable Wi-Fi, Bluetooth, Airplane mode, and other settings.

To enable/disable Wi-Fi or Bluetooth, simply tap the icons on the Quick Settings panel. To access more settings options, select the gear icon.

1. Turn on the Miracast feature on your Miracast supported TV or Miracast dongle (not included).

2. Connect your tablet to the same Wi-Fi network as your Miracast enabled TV.

3. Go to Settings > Display > Cast and tap on the menu icon.

4. Select “Enable wireless display”, then select the available display that will appear.

Note: Optimal video performance is achieved with videos that are 720p or under.

To dock the tablet to the keyboard: Align the tablet and the keyboard, then slide the tablet into the dock. The tablet will automatically recognize the keyboard when docked properly.

To undock the tablet from the keyboard: Firmly hold the keyboard, then gently pull the tablet upwards.

Tap the touchpad to select. The touchpad does not have a mechanical click, so do not push down on the touchpad.