Free English OLIGHT ARKPRO ULTRA (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD OLIGHT ARKPRO ULTRA (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I activate the OLIGHT ARKPRO ULTRA for the first time?
The OLIGHT ARKPRO ULTRA is shipped in lockout mode. You must charge it before its first use to activate it.
How do I operate the white light mode on the OLIGHT ARKPRO ULTRA?
To turn the white light on or off, single press the center button. To access moonlight mode, when the light is off, long press the center button for 1 second. To access turbo mode, double press the center button quickly. To access strobe mode, triple press the center button quickly. To change the brightness while the light is on, long press the center button.
How do I operate the UV light mode on the OLIGHT ARKPRO ULTRA?
To turn the UV light on or off, single press the center button. To change the brightness while the UV light is on, long press the center button.
How do I operate the laser mode on the OLIGHT ARKPRO ULTRA?
To turn the laser on or off, single press the side button. For momentary laser use, when the light is off, press and hold the side button to turn the laser on, and release the button to turn it off.
How do I use the combined light feature on the OLIGHT ARKPRO ULTRA?
To turn on the combined lights, press the center button and the side button separately. To turn off the combined lights, press the center button to switch both lights off simultaneously.
How do I use the lockout mode on the OLIGHT ARKPRO ULTRA?
To lock the OLIGHT ARKPRO ULTRA, when the light is off, press and hold the center button for 2 seconds. To unlock the device, when it is locked, press and hold the center button for approximately 1 second.
How do I enable or disable ArkBeat on the OLIGHT ARKPRO ULTRA?
When the OLIGHT ARKPRO ULTRA is off, press and hold the side button and then double press the center button.
What are the specifications of the OLIGHT ARKPRO ULTRA?
The following table provides the technical specifications for the OLIGHT ARKPRO ULTRA:
| Feature | Specification |
|---|---|
| Battery Capacity | 2,000 mAh |
| Battery Voltage | 3.7 V |
| Battery Energy | 7.4 Wh |
| Charging Method | USB-C/MCC |
| Full Charge Time | 1.5 h (USB-C)/3 h (MCC) |
| Net Weight | 120 g / 4.23 oz |
| Dimensions | 124 * 27 * 16 mm / 4.88 * 1.06 * 0.63 in |
| Maximum Light Intensity | 10,640 cd |
| Maximum Range | 205 m |
| IP Rating | IPX7 |
What are the safety warnings for the OLIGHT ARKPRO ULTRA?
Please adhere to the following safety precautions for the OLIGHT ARKPRO ULTRA:
1. Do not look directly at the light source or shine it into your eyes, as this may cause temporary blindness or permanent damage to your eyes.
2. Do not cover the light outlet at close range, as the energy radiated by the light may damage the product’s light emitting components, and even cause external objects to burn.
3. Do not store, charge, or use this light in a car where the temperature inside may exceed 60°C or in similar environments.
4. Do not remove the battery or replace it yourself.
5. Do not short-circuit the charging port with a metallic object intentionally.
What are the maintenance and usage notices for the OLIGHT ARKPRO ULTRA?
Please follow these notices for the OLIGHT ARKPRO ULTRA:
1. Do not put a hot light into any type of fabric bag or fusible plastic container.
2. Do not activate the maximum brightness mode multiple times continuously to prevent high temperature on the surface.
3. When the product gets hot, please switch to low brightness or turn it off temporarily.
4. Before long-term storage, please fully charge the product.
5. Do not use the product while charging.
6. Keep the charging port clean and dry.
7. Do not lick or place the charging port in your mouth, as a small electrical charge may cause discomfort.
8. It is normal for the light to flicker when the battery is running low.
9. Do not disassemble the product.
10. The switch is magnetically sensitive; its function may be affected by strong magnets nearby.
11. Do not immerse the flashlight in seawater or other corrosive media as it will damage the product.
CLICK HERE TO DOWNLOAD OLIGHT ARKPRO ULTRA (01) PDF DOCUMENT