NENO GATO (01) PDF MANUAL

NENO GATO (01) PDF SUMMARY:

What is the purpose of the Neno Gato device?

The Neno Gato is an electronic video baby monitor for remote monitoring of children’s rooms.

---

What is the warning about the charging cable?

The charging cable should be kept in a safe place and out of children’s reach, because failure to comply may threaten to strangle a child or cause other dangerous situations like electric shock.

---

What does the ‘Pairing’ option do?

Selecting the ‘Pairing’ option will start the process of pairing the receiver and transmitter. The receiver and transmitter should be paired immediately out of the box.

---

What does the ‘Alarm’ option do?

When the alarm is on, an alarm sounds from the receiver when the transmitter detects a sound. If the alarm is off, the receiver will not trigger the alarm when the transmitter detects a sound.

---

What does the ‘Eco mode’ option do?

When ‘Eco mode’ is on, the receiver will automatically turn off the display and enter power-saving mode after 20 seconds of inactivity. If the mode is off, the receiver screen will always be turned on.

---

What does the ‘Photo Album’ option do?

The ‘Photo Album’ option allows you to view photos taken by the camera. When the device’s memory is full, the oldest photos will be automatically overwritten by the new ones.

---

What does the ‘Microphone sensitivity’ option do?

The ‘Microphone sensitivity’ option allows you to change the sensitivity of the microphone in the transmitter. X – microphone off. L- low microphone sensitivity. H – high microphone sensitivity.

---

What does the ‘Lullaby’ option do?

The ‘Lullaby’ option allows you to choose which of the 6 preset lullaby melodies will be played.

---

What does the signal strength icon on the home screen indicate?

The signal strength icon indicates the signal strength between the transmitter and receiver.

---

What does the temperature reading on the home screen indicate?

The temperature reading indicates the temperature of the room where the transmitter is located.

---

How long does it take for the receiver to enter ECO mode?

The receiver will automatically enter ECO mode after 20 seconds of inactivity.

---

What does the battery status icon on the home screen indicate?

The battery status icon indicates the battery status of the receiver.

---

What are some safety measures to take when using the device?

• Read the instructions for use and keep the manual for later reference.
• Follow the instructions carefully when using the device.
• Clean the device with a dry cloth. Moisture can damage the inside of the device.
• Make sure that the power cord is placed in a way that does not pose a danger.
• Use only the power cord and adapter included in the kit. Do not connect the device directly to a 220V/ 230V socket.
• The device is for indoor monitoring only.
• Do not install the device near water containers, radiators, hot air vents, stoves, and other sources of heat or moisture.
• Keep the cord and power adapter away from your child’s range.
• The transmitter detects sound within 2-3 meters from the device.
• This product is NOT intended as a substitute for childcare. Check regularly on the child. The alarm will not alert the user to actions that the child performs silently.
• Do not use a third-party extension cord or power adapter.
• Place the camera/transmitter in the right place and at the right angle to observe the child.
• The product is not a toy. Do not allow children to play with the device.
• Do not touch the power outlets with sharp or metal objects.
• The device must be installed by an adult. During installation, keep small elements of the device away from children.

---

What are the main functions of the device?

• Portable receiver with 2.4 inch color LCD display.
• Two-way voice communication.
• Temperature monitoring in the room.
• Built-in 6 lullabies that are played from both the transmitter and receiver. If you mute the receiver, the music is going to play from the transmitter only.
• Automatic night mode with a camera range of 3-5 meters.
• ECO mode, which saves the receiver’s battery (Normal work time: 4 hours, max. up to 72 hours).
• Taking pictures, the device can store up to 68 photos in memory.
• ECO mode: after 20 seconds of inactivity, the receiver of the device enters ECO mode, in which the receiver display is switched off. The receiver turns on automatically and activates the alarm when the transmitter placed in the children’s room detects a sound.

---

What should I do if there is no image from the camera?

• Make sure the transmitter is plugged in.
• Make sure the receiver has a charged battery or is plugged in.
• Make sure the receiver is turned on.
• Check if the devices are paired correctly.
• Check if the distance between the transmitter and receiver is adequate.

---

What should I do if there is no sound from the camera?

• Make sure the microphone in the transmitter is turned on.
• Check the battery status of the receiver – the device with a low battery may not play audio.
• Check the distance between the transmitter and receiver – it may be too large for the receiver to receive sound along with the image.

---

What should I do if the image on the screen flashes?

Keep the transmitter away from heat sources, because they cause interference.

---

How do I pair the transmitter and receiver?

Unplug the transmitter from the power supply. On the receiver menu, select the Pairing icon and press the Microphone button to confirm the selection. Then connect the receiver to the power supply. The devices should pair with each other, and the transmitter camera image should appear on the receiver screen.

---

What are the specifications of the display and camera?

• Display: TFT LCD 2.4"
• Camera Lens: ¼ CMOS
• Resolution: Camera/transmitter: 640×480 px, Display/Receiver: 240×320 px

---

What is the frequency range of the device?

The device’s frequency range is 2400 Mhz – 2483 MHz.

---

How much memory does the device have for photos?

The device has memory for 68 photos.

---

What type of power supply does the device use?

The device uses a USB-C power supply.

---

What type of battery does the receiver use?

The receiver uses a built-in rechargeable Lithium-polymer battery, 3.7V 950mAh.

---

What is the signal range of the device?

The signal range is up to 100 m outdoors and up to 40 m indoors.

---

What is the operating temperature range of the device?

The operating temperature range is 0 °C – 50 °C.

---

What are the dimensions of the transmitter and receiver?

• Transmitter: 121x60x60 mm
• Receiver: 121x60x30 mm

---

How long is the warranty for the product?

The product is covered by a 24-month warranty.

---

What does the crossed-out trash can symbol indicate?

The crossed-out trash can symbol indicates that unusable electrical or electronic devices, its accessories, or components cannot be disposed of with household waste. They should be delivered to a collection point for proper disposal.

---

What is included in the package?

The package contains a transmitter, receiver, 2x power cables, 2x power adapters, and 1x manual.

---

How do I start using the device?

1. Plug the transmitter into an electrical outlet using the included power adapter. Make sure that the adapter and cable are out of reach of the child.
2. When the transmitter is plugged in, connect the receiver to power. Use the adapter included in the kit to plug the device into an electrical outlet.
3. Hold the On/Off button on the receiver for 2-3 seconds. The device screen will turn on and it will automatically start receiving the signal from the transmitter, allowing you to preview the camera image.

---

Can the receiver be used without being plugged into the power outlet?

When the battery is fully charged, the receiver can be disconnected from the power outlet and taken with you. The transmitter must always be connected to the power supply.

---

Where should I place the transmitter?

Place the transmitter in a convenient location and point its lens towards the area you want to monitor. Adjust the camera until you are satisfied with the image displayed on the receiver monitor. Do not place the monitoring unit within your child’s range.

---

What should I do if there is video or sound interference?

If there is video or sound interference, move the units to other locations and make sure they are not near other electrical appliances.

---

How do I turn the receiver on or off?

Hold the On/Off button for 2-3 seconds to turn the receiver on or off.

---

How do I switch to the energy-saving ECO mode?

Press the On/Off button while the device is running to switch to the energy-saving ECO mode.

---

How do I wake up the receiver when in ECO mode?

If the device is in ECO mode, press the On/Off button to wake it up and turn on the receiver display.

---

How do I enter the Menu mode?

Press the Menu button to enter Menu mode. In Menu mode, it takes the user back to the previous menu/home screen.

---

How do I adjust the brightness of the receiver display?

Press the Brightness button to change the brightness of the receiver display. It also serves as an “up” button in Menu mode.

---

How do I take a photo?

Pressing the Photo button causes the camera to take a photo and save it to the device’s memory. It also serves as a “left” button In Menu mode.

---

How do I use the two-way voice communication feature?

Hold down the Microphone button to start the microphone built into the receiver and allow the parent to talk to the child. In Menu mode, it approves the selection.

---

How do I select and play a lullaby?

Pressing the Lullabies button allows you to select a lullaby and play it from the transmitter. It also serves as a “right” button in Menu mode.

---

How do I change the volume of the receiver?

Pressing the Sound button changes the volume at which the receiver plays the sound. It also serves as a “down” button in Menu mode.