NENO CLARO (01) PDF MANUAL

NENO CLARO (01) PDF SUMMARY:

What are the cautions to consider before using the milk collector?

Before each use, please check the condition of the product. We recommend using only soft brushes or sponges for cleaning. Hard materials can scratch the product. If there is any sign of damage, replace the product. Do not store near sharp objects. This product is not a toy and should be used in accordance with its intended use. Store the product in a dry place and avoid direct sunlight.

How do you use the milk collector?

1. Make sure that all the components are properly installed.
2. Hold the product on your breast and cork in the slot.
3. The collector should be used while wearing a bra. Make sure it is worn properly to prevent leakage.
4. When the container is full, remove the silicone cap and pour the milk into a feeding bottle or pour it into a milk bag and refrigerate.
5. Wash the collector under running water.
6. Pass one end of the silicone pin through the hole on the other end to hang the collector to dry.
7. Place in a cool and well-ventilated place to dry.

What material is the milk collector made of?

The milk collector is made of silicone (overlay) and PP (container).

What are the dimensions of the milk collector?

The collector dimensions are 10.3 x 9.5 x 3.5 cm.

What are the dimensions of the set?

The set dimensions are 11 x 7 cm.

How much does the milk collector weigh?

The milk collector weighs 32g.

How much does the set weigh?

The set weighs 114g.

What is included in the set?

The set includes 2 pieces of the collector, and a case.

What is the warranty period for the product?

The product is covered by a 24-month warranty.

How do you clean the milk collector for sterilization?

For sterilization, prepare a vessel with boiling water and place the disassembled parts of the product in it. Sterilization should take approximately 3-4 minutes.