NEDIS WIFICDP31BK (01) PDF Document

To operate the NEDIS WIFICDP31BK video doorbell, you need to download the Nedis SmartLife application from your device’s app store.

Please follow these steps for the installation of your NEDIS WIFICDP31BK:

Step 1. Mount the wall bracket to your desired location using the provided screws and wall plugs. A Phillips head screwdriver will be needed.

Step 2. Charge the doorbell unit fully by connecting it to a power outlet using the provided USB cable and a power adapter.

Step 3. Open the Nedis SmartLife app on your smartphone and tap the ‘+’ icon to add the doorbell to your account.

Step 4. Slide the charged doorbell unit onto the installed wall bracket from the top until it clicks into place.

Step 5. Secure the doorbell to the bracket by inserting and tightening the security screw at the bottom of the unit with the supplied tool.

To pair the indoor chime with your NEDIS WIFICDP31BK, follow these steps:

Step 1. Plug the indoor chime into a power outlet.

Step 2. Press and hold the button on the side of the chime for approximately 6 seconds to enter pairing mode.

Step 3. While the chime is in pairing mode, press the main button on the NEDIS WIFICDP31BK video doorbell to complete the connection.