NEDIS MPWL500BK (01) PDF DOCUMENT

The Nedis MPWL500BK is a wireless microphone with a receiver.

This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety.

The product is intended for indoor use only.

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

1. Microphone

2. Status indicator LED

3. On/mute / off switch

4. Battery compartment

5. Power adapter

6. 6.35 mm audio cable

7. AUX output

8. Channel button (no function)

9. Power input

10. Antenna

11. Power button

12. Volume knob

13. Power indicator

14. RF indicator

15. AF indicator

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.

Only use the product as described in this document.

Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.

Do not drop the product and avoid bumping.

Unplug the product from the power source and other equipment if problems occur.

Only use the provided power supply.

Do not expose the product to water or moisture.

Do not expose the product to direct sunlight, naked flames or heat.

Keep distance from flammable objects.

This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

Do not dismantle, open or shred secondary cells or batteries.

Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.

Do not short-circuit a cell or a battery.

Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.

Do not subject cells or batteries to mechanical shock.

In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.

Always purchase the battery recommended by the product manufacturer for the product.

Do not remove a cell or battery from its original packaging until required for use.

Do not use any cell or battery which is not designed for use with the equipment.

Use only the cell or battery in the application for which it was intended.

Do not mix cells of different manufacture, capacity, size or type within a product.

Wipe the cell or battery terminals with a clean dry cloth if they become dirty.

Battery usage by children should be supervised.

Observe the plus (+) and minus (-) marks on the cell, battery and equipment and ensure correct use.

When possible, remove the battery from the product when not in use.

Properly dispose of the empty battery.

Seek medical advice immediately if a cell or a battery has been swallowed.

Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.

Use only size AA batteries for this product.

1. Open the battery compartment.

2. Place 2 size AA batteries (not included) into the compartment.

Make sure to match the (+) and (-) polarity markings.

3. Close the battery compartment.

1. Plug the power adapter into the power input.

2. Plug the other end of the power adapter into a power outlet.

3. Extend the antenna and point it upwards.

1. Press the power button to switch on the product.

2. The power indicator lights up.

3. Plug the 6.35 mm audio cable into the AUX input.

4. Plug the other end of the audio cable into your audio output device.

Rotate the volume knob to adjust the volume to the desired sound level.

The RF indicator lights up green to indicate the microphone is switched on.

The AF indicator lights up red to indicate the microphone is connected with audio/sound output.

Press the power button to switch off the receiver.

1. To turn on the microphone, switch the on/off switch to ‘ON’.

2. Speak into the microphone to amplify your voice.

To switch off the microphone, switch the on/off switch to ‘OFF’.

To mute the microphone, switch the on/off switch to the middle position.