Free English NATIONAL INSTRUMENTS 9694 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD NATIONAL INSTRUMENTS 9694 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the purpose of the NATIONAL INSTRUMENTS 9694?
The NATIONAL INSTRUMENTS 9694 is a Digital I/O Breakout RMC. It is used to connect and use digital I/O with NI sbRIO devices through the RIO Mezzanine Card (RMC) connector.
What safety precautions should be followed when using the NATIONAL INSTRUMENTS 9694?
Do not operate the NATIONAL INSTRUMENTS 9694 in a manner not specified in the operating instructions. Product misuse can result in a hazard and may compromise the safety protection built into the product.
If the product is damaged in any way, do not use it and return it to National Instruments for repair.
Additionally, note that National Instruments makes no product safety, electromagnetic compatibility (EMC), or CE marking compliance claims for NI sbRIO devices. The end-product supplier is responsible for conformity to all compliance requirements.
How do I mate and mount the NATIONAL INSTRUMENTS 9694 to an NI sbRIO device?
The device mates via the RMC connector. For mounting, the mounting holes on the NI sbRIO device are designed to accommodate specific fasteners.
Compatible fasteners: M3 or 4-40 fasteners.
Standoffs or bosses: Up to 4.5 mm or 3/16 in. in diameter.
What are the Digital I/O channel specifications for the NATIONAL INSTRUMENTS 9694?
The NATIONAL INSTRUMENTS 9694 features the following channel configurations:
On screw terminals: 64 channels
On 100-mil spacing holes: 32 channels
What are the current limits for the NATIONAL INSTRUMENTS 9694 Digital I/O?
Max tested current per channel: +/- 3 mA
Max tested current, all lines: 288 mA
What are the input and output logic levels for the NATIONAL INSTRUMENTS 9694?
The logic levels for the 3.3 V Digital I/O are as follows:
| Parameter | Specification |
|---|---|
| Input low voltage (VIL) | 0 V min; 0.8 V max |
| Input high voltage (VIH) | 2.0 V min; 3.465 V max |
| Output high voltage (VOH), sourcing 3 mA | 2.4 V min; 3.465 V max |
| Output low voltage (VOL), sinking 3 mA | 0.0 V min; 0.4 V max |
What are the power output specifications for the NATIONAL INSTRUMENTS 9694?
5 V: 1.5 A, +/- 5% voltage tolerance
FPGA VIO (3.3 V): 0.33 A, +/- 5% voltage tolerance
What fuses are used in the NATIONAL INSTRUMENTS 9694?
The device uses the following fuses:
| Fuse Type | Manufacturer | Part Number | Rating | Voltage | Speed |
|---|---|---|---|---|---|
| 5 V fuse (F2) | Littelfuse | 0454002 (or equivalent) | 2 A | 125 V | Time delay |
| FPGA VIO fuse (F1) | Littelfuse | 0454.750 (or equivalent) | 750 mA | 125 V | Time delay |
What are the environmental specifications for operating the NATIONAL INSTRUMENTS 9694?
The NATIONAL INSTRUMENTS 9694 is for indoor use only.
Local ambient temperature near device (IEC 60068-2-1, IEC 60068-2-2): -40 to 85 Degrees C
Operating humidity (IEC 60068-2-56): 10 to 90%, noncondensing
Storage humidity (IEC 60068-2-56): 5 to 90%, noncondensing
Maximum altitude: 5,000 m
Pollution Degree: 2
What is the storage temperature range for the NATIONAL INSTRUMENTS 9694?
The storage temperature range (IEC 60068-2-1, IEC 60068-2-2) is -40 to 85 Degrees C.
What is the weight of the NATIONAL INSTRUMENTS 9694?
The device weighs 82 g (2.89 oz).
CLICK HERE TO DOWNLOAD NATIONAL INSTRUMENTS 9694 (01) PDF DOCUMENT