Free English MUSICAL FIDELITY X-DAC (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MUSICAL FIDELITY X-DAC (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the specifications of the MUSICAL FIDELITY X-DAC?
| THD | < 0.02% 20Hz-20kHz Unweighted < 0.008% 20Hz-20kHz “A” weighted |
| Frequency response | ± 0.2dB 20Hz-20kHz |
| S/N ratio | better than -90dB Unweighted better than -100dB “A” weighted |
| Conversion type | 18 bit Co-phase 8x oversampled |
| Power requirement | 12V AC 500mA (via mains adaptor supplied) |
| Dimensions (mm) | 110 x 110 x 220 (W x H x D) width and height include feet |
How do I connect the MUSICAL FIDELITY X-DAC to my audio system?
All connections should be made before the mains adaptor is plugged in. The MUSICAL FIDELITY X-DAC is easy to connect into your system:
1. Connect a digital output from your CD player (or other digital source) to one of the MUSICAL FIDELITY X-DAC’s digital inputs. The unit has both optical and electrical type digital inputs; you may use either.
2. Connect the MUSICAL FIDELITY X-DAC left and right outputs to a line level input (e.g. CD or AUX) on your amplifier system.
3. Once these connections are made, plug in the mains adaptor. The “Lock” LED should light to show that the unit has detected a valid incoming digital signal, and one of the sample frequency LEDs should light (44.1kHz for CD, 48kHz for DAT etc.).
What installation precautions should I follow for the MUSICAL FIDELITY X-DAC?
To ensure trouble-free performance, please observe the following precautions:
Do not use the MUSICAL FIDELITY X-DAC near water.
Keep the MUSICAL FIDELITY X-DAC away from heat sources such as radiators.
Only use the mains adaptor provided. The use of other adaptors could seriously damage your unit.
Place all connecting cables where they are not likely to be walked on or trapped by items placed on them.
Do not remove any covers, as there are no adjustments within.
Is the MUSICAL FIDELITY X-DAC compatible with HDCD disks?
Yes. The MUSICAL FIDELITY X-DAC is fully compatible with the HDCD process. It will automatically detect if a CD disk is HDCD encoded and then perform the correct de-coding. In this mode, the HDCD indicator on the front panel will light up.
What should I do if I experience interference with the MUSICAL FIDELITY X-DAC?
If interference is experienced, the following measures are recommended:
– Identify the source of interference, turn the MUSICAL FIDELITY X-DAC off and on, and check if the interference persists.
– Re-orientate or relocate the receiving antenna.
– Increase the separation between the MUSICAL FIDELITY X-DAC and receiver.
– Connect the MUSICAL FIDELITY X-DAC and receiver to different mains outlet circuits.
– Consult your dealer or an experienced radio/TV technician.
Should I turn off the MUSICAL FIDELITY X-DAC when not in use?
The MUSICAL FIDELITY X-DAC has been designed so that it may be left on indefinitely.
What cables are recommended for the MUSICAL FIDELITY X-DAC?
For the best results, it is recommended that you use Musical Fidelity X-LINX “no-nonsense” interconnect cables. Further improvements in sound quality can be gained by using a Musical Fidelity X10-D valve line stage between the MUSICAL FIDELITY X-DAC outputs and the inputs of your amplifier.
How does Radio Frequency Interference (R.F.I.) affect the MUSICAL FIDELITY X-DAC?
The MUSICAL FIDELITY X-DAC has been tested to ensure its operation will not be adversely affected by normal background levels of R.F.I. However, if the unit is subjected to abnormally high levels of R.F.I., it may not perform as expected. In the unlikely event of this happening, please contact the service department.
Does the MUSICAL FIDELITY X-DAC have user-serviceable parts?
No. Do not remove any covers; the MUSICAL FIDELITY X-DAC will not be covered under warranty if it has been tampered with. There are no adjustments within. Please refer all service work to an authorised Musical Fidelity agent.
Can I modify the MUSICAL FIDELITY X-DAC?
Warning: Any modifications or changes to this unit not expressly approved by Musical Fidelity who are the party responsible for compliance could void the user’s authority to operate this equipment.
CLICK HERE TO DOWNLOAD MUSICAL FIDELITY X-DAC (01) PDF DOCUMENT