MPM MSW-22 (01) PDF DOCUMENT

1. Connect the MPM MSW-22 dryer to a power source, making sure that the airflow control switch is turned off.

2. Choose your preferable temperature and speed settings.

Caution! Do not cover the air outlet filter located on the back of the dryer when using the appliance, as it may lead to easy overheating.

The dryer has a protection system preventing the appliance against overheating; if the air outlet openings are blocked, the appliance will turn off, and then turn on automatically after cooling itself down.

The MPM MSW-22 appliance has 3 temperature settings, 2 airflow settings, and a cold air button.

To use the cool airflow, hold down the button.

The MPM MSW-22 dryer is equipped with:

1. A focusing cap / concentrator used to dry the hair by directing a compact blast of air to the selected strand of hair.

2. A diffuser for emphasizing natural curls and giving the hair volume.

The accessories are mounted by connecting them to the dryer inlets.

The dryer is also equipped with an air ionization function (built-in generator) responsible for releasing negative ions when the dryer is turned on. Negative ions neutralize the positive charges on hair, resulting in a lack of static discharge and smoothing of individual hair strands.

The device should be kept clean to ensure its proper functioning. Follow the rules below before cleaning:

1. Always unplug the device from the electrical outlet after use.

2. After the dryer has cooled down, wipe the outer part of the casing with a damp cloth.

3. Do not wrap the cord around the appliance; instead, wind it loosely at the side.

4. To clean the rear filter, turn it to the left while holding the device handle and remove it. Remove hair and other debris from it using a soft brush. Remount the filter so that its hooks fit into the holes in the dryer housing. Then turn it clockwise until a click can be heard.

Technical specifications for the MPM MSW-22 are given on the product nameplate.

Length of mains cable: 1.8 m.