MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 (01) PDF Document

Please remove the isolation stickers from the earbuds and charge the headset for at least 2 hours before using your MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 for the first time.

You need to twist the case to open it. The case indicates which earbud is for the left and which is for the right.

The left earbud of the MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 will be the master earbud and connect to your device. The right earbud will automatically connect to the left.

The earbuds of the MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 automatically turn on when removed from the case and turn off when placed back in the case to charge.

Try all the gel sizes included with your MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 to find the best fit and sound. The fit is right when you get a complete seal, the gel feels comfortable, and you get the best quality and loudest sound. You may need different size gels for the left and right ear.

Insert the earbuds of your MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 with the ear gel directed towards your ear canal. Twist them gently until they fit comfortably and feel secure in your ear.

When you take the earbuds of your MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 out of the case, you have 5 minutes to put them on, or they will go dormant. Put them back in the case to wake them up.

Step 1: Turn on Bluetooth on your device.

Step 2: Take both wireless earbuds out of the case and put them in your ears.

Step 3: On your device, go to the Bluetooth menu, select VerveOnes or VerveOnes+ for your MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001, and pair and connect. You will hear “Paired” when the pairing is complete.

Once you start playing music on your device, use the Music Control Button on either earbud of your MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 as follows:

Press once to pause a track. Press again to resume.

Double-press to go to the next track (depending on your music player).

Triple-press to go back one track or start the song over.

Press and hold for 3 to 6 seconds to hear the Equalizer options. Press again to select a preferred setting.

You can use the Call/Voice Control Button on either earbud of your MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001:

Press once to answer an incoming call.

Double-press to reject an incoming call.

Press once to end a call.

Additionally, you may say “Answer” or “Ignore” for an incoming phone call if prompted.

When not in a call and not playing music, press and hold the button on your MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 to start voice commands. You will hear a tone. Release the button, and you will hear a second tone from your phone. Say your command. Press and hold again to cancel a voice command.

Put the earbuds into the case and press them firmly until you hear a click and the earbud lights turn on. Twist the case until it is completely closed.

Charge the case and the earbuds of your MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001 by plugging in the charging cable. The case light turns on when it is charging.

You can download the designated app to enhance your experience with features such as:

Locate a lost earbud: View a map of the last time your earbud was connected to your device.

Adjust the equalizer: Choose from six preset sound profiles.

Pass-Through Audio: Turn this on to hear noises around you.

Ear Detect: Automatically turns the earbud on when it detects it is in your ear and turns it off when removed.

Voice Prompts: Choose a new language for voice prompts.

To optimize the Bluetooth connection and minimize drops, keep your device in the optimal RF zone, which is generally around the area of your body where your pockets or wrist-worn devices are located relative to the left master earbud of the MOTOROLA VERVEONES+ (VERVEONESPLUS) SH001.